Questions? Call us at (262) 218-2915

Sign Regulations in Lindenhurst, New York

Lindenhurst, New York has specific sign regulations covering 11 sign types across 5 zoning districts. Regulated sign types include Wall Sign, Detached or Ground Sign, Tower Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Lindenhurst, New York

Sample Sign Requirements in Lindenhurst

Sign TypeMax HeightMax AreaSetback
Detached or Ground Sign16 feet60 square feetNot less than 20 feet from property line, or established setback if front setbacks in the block are less.
Wall Sign5 feet300 square feet (total for all wall signs)Not listed
Tower Sign24 feet120 square feet (total for all surfaces if multidimensional)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for LindenhurstFull Coverage

Sign Types Covered

11

  • Wall Sign
  • Detached or Ground Sign
  • Tower Sign
  • Roof Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Lindenhurst

Municipal Code2 permit application links available

Frequently Asked Questions

In Lindenhurst, the height limit for Detached or Ground Sign - Option 1 in the Business District, Industrial District, Manufacturing District is 9 feet (Sec. 193-104A). The height limit for Wall Sign in the Business District, Industrial District, Manufacturing District is 15 feet from ground level (Sec. 193-104B). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Lindenhurst require a permit. From the submission notes on this page: Upon application for a sign permit, a scale drawing showing the structural members, lettering, pictorial matter, and a location plan showing the position of the sign must be submitted, along with other information as required by the Building Inspector. Run a code check for an exact address to see the permit requirements for that zone.

Lindenhurst's sign code covers 11 sign types, including Wall Sign, Detached or Ground Sign, Tower Sign, and Roof Sign. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Directional signs for aviation purposes, painted on flat roofs, are permitted in any use district. The full list is on this page.

In Lindenhurst, Detached or Ground Sign - Option 1 in the Business District, Industrial District, Manufacturing District must be set back 10 feet from property line (Sec. 193-104A). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Lindenhurst's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Lindenhurst Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Lindenhurst, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Lindenhurst, New York Sign Rules at a Glance

Lindenhurst, New York regulates 11 sign types across 5 zoning districts. Detached or Ground Signs - Option 1 in the Business District, Industrial District, Manufacturing District are capped at 9 feet tall and 30 square feet, set back 10 feet from property line (Sec. 193-104A). Most commercial signs in Lindenhurst require a permit.

Detailed Sign Ordinance Requirements for Lindenhurst, New York

Sign Rules by Zoning District in Lindenhurst (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Business District, Industrial District, Manufacturing District, Business or industrial use districts724 feet300 square feet (total for all wall signs)Not listed
Professional District, Professional Zone1Not listedNot listedNot listed
Residential use districts1Not listed18 x 24 inchesNot listed
Business District, Industrial District, Manufacturing District215 feet from ground level30 square feetNot listed
General Regulations For All Zones1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Lindenhurst(sample of 3 of 5 zones)

Business District, Industrial District, Manufacturing District, Business or industrial use districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Detached or Ground Sign16 feet60 square feetNot listedNot less than 20 feet from property line, or established setback if front setbacks in the block are less.Not listedDetached from any building or structure, advertising only the business conducted on the premises where placed.Not listedUnlock§151-4A, §151-6B, §151-11
Wall Sign5 feet300 square feet (total for all wall signs)Not listedNot listedNot listedAttached or incorporated in the front, side, or back facing a public street or parking lot of any building; advertising only the business conducted in such building.Not listedUnlock§151-4B, §151-11
Tower Sign24 feet120 square feet (total for all surfaces if multidimensional)10 feetNot listedNot listedAttached to or incorporated in any building advertising only the business conducted in such building.Not listedUnlock§151-4C, §151-11
Roof Sign10 feet (measured from roof level); overall height not in excess of 24 feet from crown of nearest roadway120 square feetNot listedNot less than 10 feet from property line (§151-6A).Not listedLocated at least three feet from front, rear, or sides of the buildingNot listedUnlock§151-4D, §151-6A, §151-11
Temporary SignsNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§151-10A(1-4), §151-11
Window or Door SignNot listed25% of the gross window/door space availableNot listedNot listedNot listedOn window or doorNot listedUnlock§151-14E
Paper, Cardboard, Vinyl, Plastic Sign (Temporary)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§151-14F

Residential use districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (Residential)Not listed18 x 24 inchesNot listedNot listedOneSecurely anchored to ground; not on tree, bridge or buildingNot listedUnlock§151-10B

Business District, Industrial District, Manufacturing District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Detached or Ground Sign - Option 19 feet30 square feetNot listed10 feet from property lineOneDetached from any building or structureNot listedUnlock§193-104A
Wall Sign15 feet from ground levelNot listed75% of the wall length (if over 20 feet), 90% if wall is 20 feet or lessNot listedOne per building wall on streetAttached to or incorporated in each building wall on a street, advertising only business conducted in such building.Not listedUnlock§193-104B

PermitPal covers all 5 zoning districts in Lindenhurst. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Lindenhurst

  • No sign shall be erected, constructed, altered, relocated, reconstructed, displayed or maintained in any business, manufacturing or industrial district without first having obtained a written permit from the Building Inspector, except as otherwise provided.
  • No person shall erect or place upon or over any street or sidewalk any sign, display, streamer or banner, any advertising or notice, except with permission from the Village Board after application and finding of non-injury to public safety, morality, and welfare.
  • Portable or mobile signs, including those intended to stand on the ground or be attached to a trailer, are prohibited.
  • It is unlawful to post or erect any sign, placard, banner, handbill or other notice on public property (including street signs, trees, and poles) or across or above any street, sidewalk, or other public property advertising the sale of personal property or directing persons to such premises.
  • No sign, placard, banner, handbill, or other notice shall be posted or erected on private property without the permission of the property owner.
  • No sign shall be attached to a tree or bridge or any part of a building when pertaining to temporary residential signs.
  • Box signs shall not be permitted as of January 1, 2011.
  • Exterior display or interior display (if visible from the exterior) of merchandise or advertising is not permitted in professional districts, except for one sign in conformance with requirements.
  • All signs which do not comply with the requirements of this chapter must be made to comply or be removed.
  • The use of any portion of a tower or telecommunications facilities for signs other than warning or equipment information signs is prohibited.

Exempt Signs in Lindenhurst

  • Signs erected and maintained or required by any state, county, town or municipal government agency in the discharge of any function, duty or power are excluded from the definition of sign.
  • Directional signs for aviation purposes, painted on flat roofs, are permitted in any use district.
  • Adjustable awnings made of cloth with iron or tube frames and at least seven feet above the sidewalk are not prohibited by the ordinance.

Sign Plan & Submission Notes for Lindenhurst

  • Upon application for a sign permit, a scale drawing showing the structural members, lettering, pictorial matter, and a location plan showing the position of the sign must be submitted, along with other information as required by the Building Inspector.
  • All new signs and/or altered signs seeking renewal are subject to review and approval by the Planning Board.
  • Except as otherwise allowed in the chapter, no sign shall be erected or placed on any premises in any use district except as approved by the Zoning Board of Appeals as a special exemption per the standards and conditions of the Zoning Board.
  • Variance or special exception applications require public notice signs to be posted as specified.
  • Permits for most types of signs require prior approval, and renewals require Building Inspector inspection and certificate of compliance.

Source: ecode360 municipal code