Questions? Call us at (262) 218-2915

Sign Regulations in Lumberland Town, New York

Lumberland Town, New York has specific sign regulations covering 19 sign types across 8 zoning districts. Regulated sign types include Wall Sign, Ground Sign, Window Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Lumberland Town, New York

Sample Sign Requirements in Lumberland Town

Sign TypeMax HeightMax AreaSetback
Wall SignNot listed100 sq ft or 10% of front face area, whichever is lessNot listed
Ground Sign10 feet above ground level100 sq ft or 10% of front face area, whichever is lessAt least equal to height of sign from property lines
Window SignNot listed25% of window areaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Lumberland TownFull Coverage

Sign Types Covered

19

  • Wall Sign
  • Ground Sign
  • Window Sign
  • Temporary Sign (Agricultural Activities)
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Lumberland Town

Municipal Code1 permit application link available

Frequently Asked Questions

In Lumberland Town, the height limit for Ground Sign in the Commercial/retail/industrial/manufacturing parcels zoning district is 10 feet above ground level (Sec. 250-33C(1)(a)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Lumberland Town require a permit. From the submission notes on this page: All sign permit applications must include two copies of the plans and specifications for the proposed sign. Run a code check for an exact address to see the permit requirements for that zone.

Lumberland Town's sign code covers 19 sign types, including Wall Sign, Ground Sign, Window Sign, and Temporary Sign (Agricultural Activities). Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: One non-illuminated, small sign per parcel not exceeding three square feet and 42 inches in height, carrying any lawful message, does not require a permit. The full list is on this page.

This page doesn't list a single setback distance for signs in Lumberland Town. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Lumberland Town's sign ordinance that cover digital, changing, or flashing signs: Electronic signs are prohibited, except on property owned and operated by certain public service entities and subject to specified exceptions. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Lumberland Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Lumberland Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Lumberland Town, New York Sign Rules at a Glance

Lumberland Town, New York regulates 19 sign types across 8 zoning districts. Small Signs are capped at 42 inches above ground level and 3 sq ft (Sec. 250-33B(1)). Most commercial signs in Lumberland Town require a permit.

Detailed Sign Ordinance Requirements for Lumberland Town, New York

Sign Rules by Zoning District in Lumberland Town (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Commercial/retail/industrial/manufacturing parcels310 feet above ground level100 sq ft or 10% of front face area, whichever is lessNot listed
Office parcels25 feet above ground level56 sq ft or 10% of the front face area, whichever is lessNot listed
Agricultural parcels35 feet above ground level20 sq ft per parcel (total for wall and ground signs)Not listed
Forestland parcels25 feet above ground level16 sq ftNot listed
Residential neighborhood15 feet above ground level12 sq ftNot listed
Residential parcels25 feet above ground level12 sq ftNot listed
General Regulations For All Zones1142 inches above ground level16 sq ftNot listed
Property owned and operated by a public services entity (municipality, school district, ambulance corp., fire department)1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Lumberland Town(sample of 3 of 8 zones)

Commercial/retail/industrial/manufacturing parcels

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed100 sq ft or 10% of front face area, whichever is lessNot listedNot listed1 per parcelOn the wall of the building facing the frontNot listedUnlock§250-33C(1)(a)
Ground Sign10 feet above ground level100 sq ft or 10% of front face area, whichever is lessNot listedAt least equal to height of sign from property lines1 per parcelGround sign on the lotNot listedUnlock§250-33C(1)(a)
Window SignNot listed25% of window areaNot listedNot listedNot listedInside window areas of buildings used for approved retail usesNot listedUnlock§250-33C(1)(b)

Agricultural parcels

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed20 sq ft per parcel (total for wall and ground signs)Not listedNot listed1 per parcelOn wall of a building on parcelNot listedUnlock§250-33C(3)(a)
Ground Sign5 feet above ground level20 sq ft per parcel (total for wall and ground signs)Not listedAt least equal to height of sign from property lines1 per parcelGround sign on parcelNot listedUnlock§250-33C(3)(a)
Temporary Sign (Agricultural Activities)5 feet above ground level20 sq ft (aggregate)Not listedNot listedNot listedOn parcel (agricultural activity related)Not listedUnlock§250-33C(3)(b)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Small Sign42 inches above ground level3 sq ftNot listedNot listed1 per parcelOn parcel, any lawful messageNot listedUnlock§250-33B(1)
Property Protection SignNot listed1.5 sq ft per signNot listedNot listedSee formulaAt corners and protected areas of parcelNot listedUnlock§250-33B(2)
Real Estate Sign42 inches above ground level16 sq ftNot listedNot listed1 per parcelOn parcel advertised for sale/lease/rentNot listedUnlock§250-33B(3)
Temporary Sign (General)42 inches above ground level16 sq ftNot listedNot listed1 per parcelOn parcelNot listedUnlock§250-33B(4)
Governmental Sign or Governmental FlagNot listedNot listedNot listedNot listedNot listedOn property/facility as authorizedNot listedUnlock§250-33B(5)
Directional SignNot listed1.5 sq ftNot listedNot listed1 per entrance/exitAt entrance/exit of parcelNot listedUnlock§250-33B(6)
Banner (Residential Property)Not listed9 sq ftNot listedNot listed1 per residential parcelOn residential propertyNot listedUnlock§250-33B(9)
StreamerNot listedNot listed12 inches per streamer componentNot listedNot listedStrung from mast, pole, building or structureNot listedUnlock§250-33C(8)

PermitPal covers all 8 zoning districts in Lumberland Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Lumberland Town

  • Roof signs and projecting signs are prohibited.
  • No portion of a privately owned sign, or its supporting structures, shall be placed on or within the air space above publicly owned property, a public right-of-way, or a proposed public right-of-way.
  • Cutting or killing vegetation growing on public rights-of-way (or below the ordinary high-water mark of navigable streams) to enhance visibility of a sign is prohibited.
  • Self-illuminated signs with a transparent or light background color are prohibited. Self-illuminated signs with a dark background are permitted when in compliance with all other provisions.
  • No sign shall be designed, constructed or maintained that moves, oscillates or rotates.
  • No sign shall produce noise, sound, odor, smoke, flame or any other emission.
  • No sign shall employ a mirror or other reflective device.
  • No sign shall use or include any pinwheel, balloon or streamer except as otherwise provided.
  • No sign (other than a traffic sign installed by a governmental entity) shall simulate or imitate the size, lettering or design of any traffic sign in such manner as to interfere, mislead or confuse the public.
  • No motor vehicle, trailer, farm implement or other mobile equipment may be used primarily as a sign or structural support for a sign.
  • Signs shall not be placed so as to obstruct the visibility of pedestrians or motorists at intersections and driveways.
  • Signs in wetlands, other than governmental signs and warning signs, are prohibited.
  • Electronic signs are prohibited, except on property owned and operated by certain public service entities and subject to specified exceptions.
  • Any sign illuminated from a light source other than an internal source must be fully shielded, illuminate only the sign face, direct light downward, and prevent glare or light cast beyond sign face.
  • Illuminated signs shall not be placed or located to cause glare or reflection that may constitute a traffic hazard or nuisance.
  • Abandoned signs are prohibited.
  • No sign shall be constructed, erected or maintained that faces a public waterway except as permitted.
  • A sign may not obstruct or interfere with a fire escape.
  • Signs and supporting structures must not be within six feet of any electrical conductor, light pole, utility pole, or similar infrastructure.

Exempt Signs in Lumberland Town

  • One non-illuminated, small sign per parcel not exceeding three square feet and 42 inches in height, carrying any lawful message, does not require a permit.
  • Property protection signs (subject to specified limits on number and size) do not require a permit.
  • One non-illuminated real estate sign per parcel, not exceeding 16 square feet and 42 inches in height, does not require a permit and must be removed within seven days after closing or lease signing.
  • One non-illuminated temporary sign per parcel, not exceeding 16 square feet and 42 inches in height, is exempt from a permit if not placed more than six months in any calendar year.
  • Governmental signs and governmental flags do not require a permit.
  • Directional signs do not require a permit, with one per legal driveway and no more than 1.5 square feet each.
  • Warning signs do not require a permit if not exceeding three square feet in area.
  • Signs erected by a government agency exclusively denoting a recognized historical, cultural or natural site do not require a permit if not exceeding three square feet, or as prescribed by law.
  • One non-illuminated banner per residential property parcel, not exceeding nine square feet, does not require a permit (but banners on nonresidential property require permitting).

Sign Plan & Submission Notes for Lumberland Town

  • All sign permit applications must include two copies of the plans and specifications for the proposed sign.
  • Permit applications must include information such as sign location, positioning relative to structures and property lines, and construction/attachment narrative.
  • Permit applications for signs must include a certificate of public liability and property damage insurance; the permit lapses if insurance lapses.
  • A sign permit is not required for signs explicitly listed as exempt in §250-33B; all other signs require a permit.
  • Owners of existing signs requiring a permit as of the effective date must register such signs within 90 days of the effective date of the chapter.
  • If the Code Enforcement Officer deems it necessary, stress sheets and calculations regarding sign structure may be required for permit applications.
  • Appeals of permit denials and requests for sign variances may be made in writing directly to the Board of Appeals.
  • No explicit mention of a 'master sign plan' or similar coordinated sign plan submittal is included in the ordinance text provided.

Source: ecode360 municipal code