Questions? Call us at (262) 218-2915

Sign Regulations in Menands, New York

Menands, New York has specific sign regulations covering 17 sign types across 4 zoning districts. Regulated sign types include Garage/Yard Sale Temporary Sign, Wall Sign (Temporary Real Estate), Freestanding Sign (Temporary Real Estate). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Menands, New York

Sample Sign Requirements in Menands

Sign TypeMax HeightMax AreaSetback
Wall Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listed
Freestanding Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listed
Window Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for MenandsFull Coverage

Sign Types Covered

17

  • Garage/Yard Sale Temporary Sign
  • Wall Sign (Temporary Real Estate)
  • Freestanding Sign (Temporary Real Estate)
  • Window Sign (Temporary Real Estate)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Menands

Municipal Code3 permit application links available

Frequently Asked Questions

In Menands, the height limit for Freestanding Pole Sign is 10 ft (Sec. 138-13F(4)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Menands require a permit. From the submission notes on this page: Application for a sign permit must include two sets of plans of the sign drawn to scale, showing dimensions, proposed design, colors, materials, illumination, wiring, structural details, a plot plan of the property, and designation of the primary frontage if applicable. Run a code check for an exact address to see the permit requirements for that zone.

Menands's sign code covers 17 sign types, including Garage/Yard Sale Temporary Sign, Wall Sign (Temporary Real Estate), Freestanding Sign (Temporary Real Estate), and Window Sign (Temporary Real Estate). Most commercial signs need a permit. The ordinance lists 17 exemptions. One of them: Historical site markers. The full list is on this page.

In Menands, Freestanding Ground Sign must be set back at least 5 ft (Sec. 138-13F(3)). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Menands's sign ordinance that cover digital, changing, or flashing signs: Animated signs, except public service information not combined with commercial messages. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Menands Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Menands, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Menands, New York Sign Rules at a Glance

Menands, New York regulates 17 sign types across 4 zoning districts. Sidewalk Signs (Sandwich Board Sign, Business and Industrial Zones) are capped at 36 inches tall and 24 inches wide (Sec. 138-9G). Most commercial signs in Menands require a permit.

Detailed Sign Ordinance Requirements for Menands, New York

Sign Rules by Zoning District in Menands (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential districts5Not listedUp to 24 sq ftNot listed
Heavy Industrial (HI) Zone230 ft above average gradeUp to 700 sq ftNot listed
Business Residential (BR) Zone5Not listedUp to 24 sq ftNot listed
General Regulations For All Zones1136 inches25% of window area or 50 sq ft, whichever is lessNot listed

Zone-by-Zone Sign Requirements in Menands(sample of 3 of 4 zones)

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listedNot listed1 per parcelAffixed to wall, on property for sale or leaseNot listedUnlock§138-9H(2)
Freestanding Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listedNot listed1 per parcelOn parcel for sale/leaseNot listedUnlock§138-9H(2)
Window Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listedNot listed1 per parcelOn parcel for sale/leaseNot listedUnlock§138-9H(2)
Wall Sign (New Construction Residential Real Estate)Not listedUp to 24 sq ftNot listedNot listed1On land where a new housing project is under construction or site plan approvedNot listedUnlock§138-9H(3)
Garage/Yard Sale Temporary SignNot listedUp to 4 sq ft per faceNot listedNot listed1 per parcelOn property where sale is conductedNot listedUnlock§138-9F

Business Residential (BR) Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listedNot listed1 per parcelAffixed to wall, on property for sale or leaseNot listedUnlock§138-9H(2)
Freestanding Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listedNot listed1 per parcelOn parcel for sale/leaseNot listedUnlock§138-9H(2)
Window Sign (Temporary Real Estate)Not listedUp to 4 sq ftNot listedNot listed1 per parcelOn parcel for sale/leaseNot listedUnlock§138-9H(2)
Wall Sign (New Construction Residential Real Estate)Not listedUp to 24 sq ftNot listedNot listed1On land where a new housing project is under construction or site plan approvedNot listedUnlock§138-9H(3)
Garage/Yard Sale Temporary SignNot listedUp to 4 sq ft per faceNot listedNot listed1 per parcelOn property where sale is conductedNot listedUnlock§138-9F

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning SignNot listedNot listedNot listedNot listed1 per awning faceOnly on awnings over ground floor doors/windows; valance only.Not listedUnlock§138-13F(2)
Freestanding Ground Sign8 ftNot listedNot listedFront: min 5 ft; Side: min 10 ft.1 per lot unless permittedMust meet min front/side yard setbacks for accessory buildings (not less than 5 ft front, 10 ft side). See below for BR/HI/Residential: not generally permitted.Not listedUnlock§138-13F(3)
Freestanding Pole Sign10 ftNot listedNot listedFront: min 5 ft; Side: min 10 ft.1 per lot unless permittedSame as ground sign setbacks: not less than 5 ft front, 10 ft side.Not listedUnlock§138-13F(4)
Projecting SignNo higher than roofline; bottom 10–15 ft above sidewalkNot listedNot listedNot listedNot listed10 ft clearance from other projecting signs. Securely attached, no movement.Not listedUnlock§138-13F(5)
Temporary Activity/Event Sign6 ft unless affixed to building16 sq ftNot listedNot listed1 per establishmentOn private propertyNot listedUnlock§138-9D
Project Sign (Temporary)6 ft unless affixed to building16 sq ft each (up to 3 signs)Not listed15 ft from all property lines unless affixed to building3 per projectOn construction or renovation project siteNot listedUnlock§138-9E
Garage/Yard Sale Temporary SignNot listed4 sq ft per faceNot listedNot listed1 per parcelOn property where sale occursNot listedUnlock§138-9F
Sidewalk Sign (Sandwich Board Sign, Business and Industrial Zones)36 inches24" x 36" per face24 inchesNot listedNot listedOutside establishment during business hours; minimum 30 in high; located to not interfere with pedestrian safetyNot listedUnlock§138-9G

PermitPal covers all 4 zoning districts in Menands. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Menands

  • Any sign not permitted in or by this article, as well as any sign specifically designated in this section, is prohibited.
  • Roof signs.
  • Rotating signs.
  • Animated signs, except public service information not combined with commercial messages.
  • Portable signs.
  • Banners and pennants, except as a part of a grand opening when affixed exclusively to the face of a building (30 days maximum).
  • Signs that contain or consist of ribbons, balloons, streamers, spinners or similar moving, fluttering or revolving devices.
  • Any sign or part thereof on a vehicle parked on a public right-of-way, on public property or private property so as to be intended to be viewed from a motorized vehicular public right-of-way, which has for its basic purpose the providing of advertisement of products or directing people to a business or activity located on the same or nearby property or any other premises (with exceptions for vehicular signage not primarily for advertising).
  • Any sign other than an exempt sign placed on any curb, sidewalk, hydrant, utility pole, rock, building or tree.
  • Any sign erected or maintained which might be confused with any traffic control device or which might interfere with the vision or discernment of any traffic sign or which might cause danger to public travel.
  • Feather signs, except as a part of a grand opening (30 days maximum).

Exempt Signs in Menands

  • Any New York State inspection station identification sign which is at a height which does not exceed 10 feet and is located on an exterior or interior wall of the motor vehicle service station.
  • Any New York State authorized repair shop identification sign for passenger vehicles which is at a height which does not exceed 10 feet and is located on an exterior or interior wall of the motor vehicle service station.
  • Any New York State authorized repair shop identification sign for trucks which is at a height which does not exceed 10 feet and is located on an exterior or interior wall of the motor vehicle service station.
  • A sign that is incorporated into or on a coin-operated machine, vending machine, gasoline pump, or telephone booth.
  • Street number identification plates.
  • Historical site markers.
  • Posted ("no hunting, fishing and trapping" and "no trespassing") signs which do not exceed two square feet.
  • A sign that is posted by a governmental unit, including a public school district.
  • Utility line identification and location signs.
  • Rest room identification signs which do not exceed two square feet.
  • Any sign required by federal or New York State law.
  • Vacancy/no vacancy signs which do not exceed three square feet.
  • Accessory signs identifying such uses as parking, no parking or office, which do not exceed two square feet each.
  • Holiday decorations erected for and during the particular holiday they relate to or symbolize.
  • Open/closed business signs which do not exceed two square feet.
  • Official public information signs, memorial signs, building names, erection dates or similar information cut into masonry or other permanent surface or constructed of bronze or other noncombustible material, not to exceed 16 square feet.
  • Signs and markers in cemeteries designating graves and memorials.

Sign Plan & Submission Notes for Menands

  • A sign permit is required for any person to erect, construct, enlarge, move or convert any sign in the Village, except as otherwise provided.
  • Application for a sign permit must include two sets of plans of the sign drawn to scale, showing dimensions, proposed design, colors, materials, illumination, wiring, structural details, a plot plan of the property, and designation of the primary frontage if applicable.
  • Sign plans must include a statement of structural soundness and wind load compliance with the NYS Uniform Fire Prevention and Building Code, signed by the owner, applicant, or designer.
  • For all electrified signs, a New York Board of Fire Underwriters' certificate of approval must be submitted within 10 days after installation.
  • For billboards, a building permit from the Building Inspector must be obtained prior to erection, reconstruction, or structural alteration, including submission of detailed structural plans sealed by a NYS licensed engineer or architect.
  • A sign permit is not required for the change of copy, repainting, cleaning, or normal maintenance of a permitted sign, provided that the sign or sign structure is not modified.

Source: ecode360 municipal code