Sign Regulations in Nyack, New York

Nyack, New York has specific sign regulations covering 18 sign types across 5 zoning districts. Regulated sign types include Wall Sign - Flat, Wall Sign - Projecting, Freestanding Sign - Monument. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Nyack, New York

Sample Sign Requirements in Nyack

Sign TypeMax HeightMax AreaSetback
All Signs (General Placement/Construction)Minimum essential for legibility and provision of information; size and content to be minimum essential
Nameplate or Professional Sign2 sq ft
Temporary Sale or Rental Sign4 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for NyackFull Coverage

Sign Types Covered

18

  • Wall Sign - Flat
  • Wall Sign - Projecting
  • Freestanding Sign - Monument
  • Directional Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Nyack

Municipal Code1 permit application link available

Frequently Asked Questions

Sign height limits in Nyack vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Nyack, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Nyack, regulated sign types include Wall Sign - Flat, Wall Sign - Projecting, Freestanding Sign - Monument, Directional Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Nyack vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Nyack are regulated with specific requirements for brightness, animation, and message duration. Nyack has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Nyack Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Nyack, New York sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Nyack, New York Sign Rules at a Glance

Nyack, New York regulates 18 sign types across 5 zoning districts. Freestanding Sign - Poles in the DMU-1 District, DMU-2 District, RMU District, OMU District, WF District zoning district are capped at 15 ft tall and 20 sq ft per face, with a ≥6 ft to building setback (Sec. §360-4.11E(2)(a)). Most commercial signs in Nyack require a permit.

Detailed Sign Ordinance Requirements for Nyack, New York

Sign Rules by Zoning District in Nyack (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones3Minimum essential for legibility and provision of information; size and content to be minimum essential
SFR District, TFR District, MFR District312 sq ft
DMU-1 District, DMU-2 District, RMU District, OMU District, WF District1215 ft20 sq ft per face
CC District1125 ft60 sq ft per face
M District, H District106 ft60 sq ft per face

Zone-by-Zone Sign Requirements in Nyack(sample of 3 of 5 zones)

DMU-1 District, DMU-2 District, RMU District, OMU District, WF District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign - Flat1 per establishmentParallel to face of building; located on fascia bands above store window, vertical fascia of awning, or on window.Unlock§360-4.11E(1), (E)(1)(a), (E)(1)(c)
Wall Sign - Projecting15 sq ft per face (2 faces max)1 per establishmentPerpendicular to building/street; can protrude up to 42 inches from building; not closer than 2 ft to curbline; bracket max 4 ft per side.Unlock§360-4.11E(1)(b), (1)(c), (2)(a)
Freestanding Sign - Pole15 ft20 sq ft per face≥6 ft to building1 per qualifying buildingAllowed where building is set back 25 ft or more from front lot line.Unlock§360-4.11E(2)(a)
Freestanding Sign - Monument4 ft20 sq ft per face≥6 ft to building1 per qualifying buildingAllowed where building is set back 25 ft or more from front lot line.Unlock§360-4.11E(2)(a)
Flag SignPole: 6 ft max; sign no higher than 12 ft; at least 6 ft above ground if pole at ≥45°, 10 ft if less than 45°15 sq ft, 2 faces maxMax one per public entrance, one per businessOne sign per public entrance; max one per business; only when open.Unlock§360-4.11E(6)
Awning SignPart of the total sign area calculation except for valance-only signsValance-only signs: 6 inch letter height maxOn awningUnlock§360-4.11E(7)
Permanent Interior Sign (Upper Floor Window)3 inches (telephone/web address letter height)20% of window areaPainted or placed/hung within 24 inches of inside window glass.Unlock§360-4.11E(9)
Temporary Sign (Interior/Window)4 sq ft (for open/closed/sale/menus/etc not needing a permit). Otherwise max 15% of ground floor window area or 36 sq ft combined with permanent signs; 20% of upper floor window area.See formulaWithin 24 inches of ground floor window/door glass.Unlock§360-4.11E(10)

CC District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign - FlatLesser of 10% of facade area or 80 sq ftSee total area limitParallel to face of buildingUnlock§360-4.11E(1), (1)(d)
Wall Sign - Projecting15 sq ft per face (2 faces max)1 per establishmentPerpendicular to building/street. May protrude up to 42 in from the building, but not closer than 2 ft to the curb. Bracket max 4 ft on a side.Unlock§360-4.11E(1)(b), (1)(d), (2)(b)
Freestanding Sign - Pole25 ft60 sq ft per facePole: ≥15 ft from property line, ≥50 ft from residential use or zone boundary. Monument: ≥5 ft from property line.1 per property1 per propertyUnlock§360-4.11E(2)(b)
Freestanding Sign - Monument6 ft60 sq ft per faceMonument: ≥5 ft from property line1 per property1 per propertyUnlock§360-4.11E(2)(b)
Flag SignPole: 6 ft max; sign no higher than 12 ft; at least 6 ft above ground (if pole ≥45º); 10 ft (if pole <45º)15 sq ft, 2 faces maxMax 1 per public entrance, 1 per businessOne sign per public entrance; max one per business; only when open.Unlock§360-4.11E(6)
Awning SignCounted in total sign area except awning valance-only signsValance-only signs: 6 inch letter height maxOn awningUnlock§360-4.11E(7)
Permanent Interior Sign (Upper Floor Window)3 inches (telephone/web address letter height)20% of window areaPainted or placed/hung within 24 inches of inside window glass.Unlock§360-4.11E(9)
Temporary Sign (Interior/Window)4 sq ft (for allowed open/closed/sale/menus/etc NOT needing a permit). Otherwise max 15% of ground floor window area or 36 sq ft (combined with permanent signs); 20% of upper floor window area.See formulaWithin 24 inches of ground floor window/door glass.Unlock§360-4.11E(10)

M District, H District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign - FlatLesser of 10% of facade area or 80 sq ftSee total area limitParallel to face of buildingUnlock§360-4.11E(1), (1)(d)
Wall Sign - Projecting15 sq ft per face (2 faces max)1 per establishmentPerpendicular to building/street. May protrude up to 42 in from the building, but not closer than 2 ft to the curb. Bracket max 4 ft on a side.Unlock§360-4.11E(1)(b), (1)(d), (2)(c)
Freestanding Sign - Monument6 ft60 sq ft per face≥5 ft from property line1 per property1 per propertyUnlock§360-4.11E(2)(c)
Directional Sign2 sq ft per signARB discretionUnlock§360-4.11E(3)
Flag SignPole: 6 ft max; sign no higher than 12 ft; at least 6 ft above ground (if pole ≥45º); 10 ft (if pole <45º)15 sq ft, 2 faces maxMax 1 per public entrance, 1 per businessOne sign per public entrance; max one per business; only when open.Unlock§360-4.11E(6)
Awning SignCounted in total sign area except awning valance-only signsValance-only signs: 6 inch letter height maxOn awningUnlock§360-4.11E(7)
Permanent Interior Sign (Upper Floor Window)3 inches (telephone/web address letter height)20% of window areaPainted or placed/hung within 24 inches of inside window glass.Unlock§360-4.11E(9)
Temporary Sign (Interior/Window)4 sq ft (for allowed open/closed/sale/menus/etc NOT needing a permit). Otherwise max 15% of ground floor window area or 36 sq ft (combined with permanent signs); 20% of upper floor window area.See formulaWithin 24 inches of ground floor window/door glass.Unlock§360-4.11E(10)

PermitPal covers all 5 zoning districts in Nyack — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 5 zones for Nyack — start free

Prohibited Signs in Nyack

  • No sign, advertising display or structure, poster or device shall be erected, moved to another portion of the building, enlarged, reconstructed, relettered or redesigned without having obtained a permit from the Architectural Review Board.
  • No sign other than signs placed by government agencies shall be erected on public property or public right-of-way unless consent is first obtained from the Village Board of Trustees.
  • No sign shall be placed on any private property without the consent of the owner.
  • No sign shall be placed or painted on any tree or rock.
  • No sign shall be placed on any utility pole except for utility identification or similar purposes.
  • Signs shall not obliterate, conceal, or destroy architectural and decorative trim.
  • All signs must be of good quality materials.
  • The size and content of the sign shall be the minimum essential for legibility and necessary provision of information.
  • Signs must be integrated with the design elements of the building(s) they are on.
  • Billboards are prohibited.
  • Flashing or animated neon, LED, electronic reader board or electronic graphics or other artificial light sign or device are prohibited.
  • Flashing signs, including any sign or device on which the artificial light is not maintained stationary and constant in intensity and color at all times when in use, are prohibited.
  • Internally illuminated (including neon) signs located on the exterior of buildings are prohibited except in the CC and M zoning districts.
  • Signs that compete for attention with or may be mistaken for a traffic signal are prohibited.
  • Outdoor signs made of impermanent materials (such as paper or cardboard) are prohibited.
  • Sandwich board signs are prohibited except as permitted in the DMU-1, DMU-2, RMU, OMU, CC, WF, and M Districts with an administrative permit.
  • Exterior signs that emit noise, sounds, or smoke are prohibited.
  • All signs shall be stationary and contain no visible or moving parts.
  • Product advertisement outside of any retail space is prohibited.
  • Signs mounted above the eave line of any structure are prohibited.
  • Internally illuminated signage is prohibited except where specifically permitted.
  • Signs may not be suspended from or attached to an awning (signs may be painted on or form part of an awning).
  • Temporary signs shall not overlap, cover, or obscure permanent signs.
  • Signs that do not comply with all provisions of the section must be removed within the stated time period.

Exempt Signs in Nyack

  • Changing the advertising or message on an approved sign specifically designed for temporary replaceable copy (such as a movie marquee or bulletin board) does not require a sign permit.
  • Painting, cleaning, and other normal maintenance and repair of a sign or sign structure do not require a sign permit unless a structural change is made or there is a change in the graphic presentation.
  • Temporary interior signs are allowed (without a permit) when together they do not exceed four square feet and do not cover more than 15% of the ground floor window area or 36 square feet (or 20% for upper floor window area).
  • Temporary signs are allowed for up to 30 days without a sign permit, including when an application for a permanent sign has been submitted.
  • A maximum of two temporary interior signs which do not need permits are allowed.
  • Special event, holiday, and announcement signs are permitted without the Building Inspector's approval in specified districts, subject to area and time limits.
  • Temporary signs pertaining to campaigns, drives or events of civic, philanthropic or educational institutions are permitted without the Building Inspector's approval for up to 15 days in certain districts and must meet area and placement rules.
  • Simple or basic design changes to a legally existing sign (same size, shape, dimension, location, or just a change to the business name) do not require ARB review, only administrative review, unless the Building Inspector determines otherwise.

Sign Plan & Submission Notes for Nyack

  • A sign permit is required for the erection, moving, enlargement, reconstruction, or redesign of any exterior or window sign, except as exempted.
  • Permit applications are to be reviewed by the Architectural Review Board unless specified exemptions apply for simple or basic design changes.
  • If the sign application is part of a site plan or special permit application, sign review is incorporated into that application.
  • An insurance certificate naming the Village as an additional insured is a permit requirement, and permits are contingent on maintaining such insurance.
  • When there are two or more occupants of a premises (such as a shopping center or strip mall), an overall plan (‘master’ or ‘overall’ sign plan) for signage is required prior to the installation or replacement of any individual sign.
  • The overall sign plan must satisfy all requirements and guidelines of the ordinance; signs must be the same with regard to materials and color, with possible variation in letter size and style.

Source: ecode360 municipal code