Questions? Call us at (262) 218-2915

Sign Regulations in Queensbury Town, New York

Queensbury Town, New York has specific sign regulations covering 18 sign types across 8 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Roof Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Queensbury Town, New York

Sample Sign Requirements in Queensbury Town

Sign TypeMax HeightMax AreaSetback
Freestanding Sign12 ft45 sq ft at 15 ft setback; 60 sq ft at 25 ft setback15 ft minimum; 25 ft for max area
Wall SignNot listedUp to 30 sq ft, or more as per formulaNot listed
Roof SignNot listedUp to 30 sq ft, or more as per formulaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Queensbury TownFull Coverage

Sign Types Covered

18

  • Wall Sign
  • Freestanding Sign
  • Roof Sign
  • For Sale/Lease/Rental Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Queensbury Town

Municipal Code1 permit application link available

Frequently Asked Questions

In Queensbury Town, the height limit for Freestanding Sign in the RC Zoning District and other zoning districts is 20 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Queensbury Town require a permit. From the submission notes on this page: A detailed drawing or plan is required with each sign permit application, showing sign area, lettering, construction, illumination, location, relation to boundaries/roads and other requested information. Run a code check for an exact address to see the permit requirements for that zone.

Queensbury Town's sign code covers 18 sign types, including Wall Sign, Freestanding Sign, Roof Sign, and For Sale/Lease/Rental Sign. Most commercial signs need a permit. The ordinance lists 17 exemptions. One of them: Signs incidental to the legal process. The full list is on this page.

In Queensbury Town, Temporary Freestanding Sign in the LC Zoning District and other zoning districts must be set back 15 ft from front property line / 40-45 ft from centerline. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Queensbury Town's sign ordinance that cover digital, changing, or flashing signs: Illuminated signs must only use lights of constant intensity; flashing, intermittent, moving lights, bare lamps, bare bulbs, or string lights are not allowed. Required price signs on fuel pumps (subject to additional restrictions if using LEDs). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Queensbury Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Queensbury Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Queensbury Town, New York Sign Rules at a Glance

Queensbury Town, New York regulates 18 sign types across 8 zoning districts. Project Signs in the MS Zoning District are capped at 50 sq ft, with a minimum 15 ft setback (Sec. 140-3L). Most commercial signs in Queensbury Town require a permit.

Detailed Sign Ordinance Requirements for Queensbury Town, New York

Sign Rules by Zoning District in Queensbury Town (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
LC Zoning District, PR Zoning District, RR Zoning District, WR Zoning District, MDR Zoning District, NR Zoning District, PUD Zoning District912 ft50 sq ftNot listed
MS Zoning District612 ft50 sq ftNot listed
O Zoning District26 ft2 sq ft per tenantNot listed
RC Zoning District, NC Zoning District, CI Zoning District, CM Zoning District, ESC Zoning District, CLI Zoning District, HI Zoning District520 ft50 sq ftNot listed
Main Street Zoning District3Not listedUp to 30 sq ft or as per formulaNot listed
Neighborhood Commercial Zoning District1Not listedProhibitedNot listed
Office Zoning District26 ft2 sq ft per tenantNot listed
General Regulations For All Zones46 ft (10 ft if required for public safety/by permission)32 sq ftNot listed

Zone-by-Zone Sign Requirements in Queensbury Town(sample of 3 of 8 zones)

LC Zoning District, PR Zoning District, RR Zoning District, WR Zoning District, MDR Zoning District, NR Zoning District, PUD Zoning District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign12 ft45 sq ft at 15 ft setback; 60 sq ft at 25 ft setbackNot listed15 ft minimum; 25 ft for max areaOne freestanding, double-faced sign per business; one per entrance accessing a different public right-of-way for business complexesMinimum 15 ft from any property lineNot listedUnlock§140-6B(1), §140-6B(2)(a), §140-6B(4)(a)[1]
Wall SignNot listedUp to 30 sq ft, or more as per formulaNot listedNot listedOne wall sign (or roof sign) attached to building, or two wall signs on a corner lotAttached to building; must not project more than 15 inches from wallNot listedUnlock§140-6B(2)(b)[1], §140-6B(3)(b), §140-6B(3)(c)
Roof SignNot listedUp to 30 sq ft, or more as per formulaNot listedNot listedOne per building (see Wall Sign regulations for alternatives)On roof, not above roof ridgeline or parapetNot listedUnlock§140-6B(2)(b)[2]
Directional/Instructional Sign6 ft (10 ft if required by public safety or by permission)4 sq ft; up to 6 sq ft if text required by lawNot listedNot listedNot listedOn-premises; for entrances, exits, parking, etc.Not listedUnlock§140-3G
Temporary Wall SignNot listed32 sq ftNot listedNot listedFive temporary sign permits per yearFlush against wall, no more than 4 inches projectionNot listedUnlock§140-4B(1), §140-4C(1), §140-4D(1), §140-4E
Temporary Freestanding SignNot listed16 sq ftNot listed15 ft from front property line / 40-45 ft from centerlineFive temporary sign permits per yearMinimum 15 ft from front property line, or 40 ft from centerline of two-lane road, or 45 ft from centerline of wider roadNot listedUnlock§140-4B(2), §140-4C(2), §140-4D(2), §140-4E
For Sale/Lease/Rental SignNot listed6 sq ft per signNot listedNot listedOne per owner, one per brokerOn premisesNot listedUnlock§140-3K(1), §140-3K(3)
Project SignNot listed50 sq ftNot listed15 ft minimumOne per projectOn premises where construction, repair, or renovation in progressNot listedUnlock§140-3L

MS Zoning District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign12 ft45 sq ft at 15 ft setback; 60 sq ft at 25 ft setbackNot listed15 ft minimum; 25 ft for max areaOne freestanding, double-faced sign per businessMinimum 15 ft from any property lineNot listedUnlock§140-6B(1), §140-6B(2)(a), §140-6B(4)(a)[1]
Wall SignNot listedUp to 30 sq ft, or more as per formulaNot listedNot listedOne wall (or roof) sign per building, or two on a corner lotAttached to building wall, not projecting more than 15 inchesNot listedUnlock§140-6B(2)(b)[1], §140-6B(3)(b), §140-6B(3)(c)
Roof SignNot listedUp to 30 sq ft, or more as per formulaNot listedNot listedOne per building (see Wall Sign for alternatives)On roof, not above roof ridgeline or parapetNot listedUnlock§140-6B(2)(b)[2]
Directional/Instructional Sign6 ft (10 ft if required by public safety or permission)4 sq ft; up to 6 sq ft if text required by lawNot listedNot listedNot listedOn-premisesNot listedUnlock§140-3G
For Sale/Lease/Rental SignNot listed50 sq ftNot listed15 ft min from property linesOne per premisesOn premisesNot listedUnlock§140-3K(2), §140-3K(3)
Project SignNot listed50 sq ftNot listed15 ft minOne per projectOn premises where construction, repair, or renovation is in progressNot listedUnlock§140-3L

RC Zoning District, NC Zoning District, CI Zoning District, CM Zoning District, ESC Zoning District, CLI Zoning District, HI Zoning District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign20 ft45 sq ft at 15 ft setback; 60 sq ft at 25 ft setbackNot listed15 ft minimum; 25 ft for max areaOne freestanding, double-faced sign per businessMinimum 15 ft from any property lineNot listedUnlock§140-6B(1), §140-6B(2)(a), §140-6B(4)(a)[2]
Wall SignNot listedUp to 30 sq ft, or as per formulaNot listedNot listedOne wall (or roof) sign per business, or two on a corner lotWall attached; not projecting more than 15 in.Not listedUnlock§140-6B(2)(b)[1], §140-6B(3)(b), §140-6B(3)(c)
Roof SignNot listedUp to 30 sq ft, or as per formulaNot listedNot listedOne per buildingOn roof, not above roof ridgeline or parapetNot listedUnlock§140-6B(2)(b)[2]
For Sale/Lease/Rental SignNot listed50 sq ftNot listed15 ft minimumOne per premisesOn premisesNot listedUnlock§140-3K(2), §140-3K(3)
Project SignNot listed50 sq ftNot listed15 ft minimumOne per projectOn premises where construction, repair or renovation is in progressNot listedUnlock§140-3L

PermitPal covers all 8 zoning districts in Queensbury Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Queensbury Town

  • Advertising signs that are located on property where the goods or services mentioned on the sign are not available are not permitted, except billboards or signs permitted under specified exceptions.
  • Illuminated signs must only use lights of constant intensity; flashing, intermittent, moving lights, bare lamps, bare bulbs, or string lights are not allowed.
  • No exterior sign lighting except downcast with cutoff fixtures.
  • No illumination that creates a hazard or nuisance to traffic or residents.
  • Signs using red, yellow, or green lights are prohibited within 100 feet of traffic control signals.
  • Indecent or obscene signs or advertising matter are prohibited.
  • Misleading advertising is prohibited.
  • Use of wording such as 'stop,' 'look,' 'danger' or similar words which may tend to confuse or resemble official signs is prohibited.
  • Human signs are prohibited.
  • No projecting sign shall be erected or maintained projecting more than four feet from the building façade.
  • Advertising utilizing a series of two or more signs along a street or highway carrying a single message is prohibited.
  • All signs must be stationary and not simulate movement; flags, banners, pinwheels, posters, balloons, streamers, searchlights, or other fluttering or moving attention devices are prohibited except as permitted for temporary signs.
  • No permanent sign in a window and visible from any public or private street or highway shall occupy more than 20% of the window area.
  • Only one sign designating accepted credit cards per premises, not exceeding two square feet.
  • Portable signs are not allowed. Vehicles with attached or suspended advertising signs are not allowed (excluding permanent business identification).
  • Signs may not project above roof ridgeline/parapet line or change the profile of the building (except permitted projecting signs).
  • Text on signs must be limited to: property owner's name, principal business, brief products/services, (no) vacancy, price information.
  • Wall signs may not project more than 15 inches from the building wall nor extend beyond the outer edge of the wall.
  • No new advertising panels shall be constructed or erected.
  • Expansion of existing advertising panels is prohibited.
  • Advertising panels inactive (no advertising for one year) must be discontinued and removed.
  • Advertising panels may not be double-decked or over 20 feet in height and must use lights of constant intensity.
  • Human signs (signs held/worn by persons, including advertising costumes) are prohibited.
  • Temporary signs: A-frame style of a temporary nature and portable signs are prohibited as temporary signs.
  • Signs or illumination causing a hazard to traffic or the public, or annoyances to neighbors, or signs projecting into required setback or right-of-way are prohibited.
  • Signs may not be attached to fences, trees, utility poles, rocks, or other natural landscape features.
  • No sign or advertising device may be erected, established, constructed, reconstructed, enlarged, extended, moved, or structurally altered without a permit, except as otherwise provided.

Exempt Signs in Queensbury Town

  • Signs posted by governmental agencies or required by governmental law, order or regulations.
  • Signs incidental to the legal process.
  • Historical tablets, memorial plaques or emblems installed by governmental agencies or religious/recognized nonprofit organizations, not exceeding six square feet.
  • Transportation signs (including bus stops), not exceeding two square feet.
  • Flags/emblems of religious, educational, governmental organizations or individuals, flown from their buildings or grounds.
  • Signs necessary for identification, operation, or production of a public utility.
  • On-premises directional/instructional signs for public convenience (public parking, loading zones, entrances/exits, self-service, etc.), not exceeding four square feet (six square feet if partly required by law), height maximum six feet (ten feet if required for public safety or by enforcement officials).
  • "Warning," "Private Drive," "Posted," "No Trespassing" signs, not exceeding two square feet.
  • Signs integral to and only advertising the contents of vending machines, within the profile of such machines, not exceeding two square feet.
  • On-premises signs not visible from any public street or adjoining properties.
  • Signs advertising sale, lease or rental of premises (restrictions on size and number apply, and must be nonilluminated; typically not exceeding six square feet for residential, 50 for commercial); must be removed within three days of change of status.
  • Project signs (for developer, contractor, etc.) during active construction/renovation, not illuminated, one sign per project, max 50 sq ft, must be removed upon project completion or within two years.
  • One double-faced freestanding sign and one single-faced attached sign for professional offices and home occupations, not exceeding two square feet per face, for name/vocation only.
  • Name/number plates identifying residents, not exceeding one square foot, mounted on house, apartment, or mailbox.
  • Lawn signs identifying residents, not exceeding one square foot (or two square feet if double-faced), nonilluminated except by integral lamppost light, no advertising.
  • Private-owner merchandise sale (garage sale, auction) signs, not exceeding four square feet, for no more than seven days.
  • Required price signs on fuel pumps (subject to additional restrictions if using LEDs).

Sign Plan & Submission Notes for Queensbury Town

  • A detailed drawing or plan is required with each sign permit application, showing sign area, lettering, construction, illumination, location, relation to boundaries/roads and other requested information.
  • Change of copy requires a permit, except in the case of any changeable copy sign.
  • Planning Board review: Individual signs are subject to Planning Board review as part of any required site plan review application in the Main Street and Office Zoning Districts.
  • If the Zoning Administrator is not satisfied that a proposed sign meets requirements, the applicant may appeal to the Board of Appeals for a determination.
  • If a variance is requested, a public meeting and review by the Board of Appeals are required; notification requirements exist for properties within 500 feet.
  • For business complexes, all building tenants may apply for wall signs as part of an overall sign plan for the complex as per the regulations for business complex signage.

Source: ecode360 municipal code