Questions? Call us at (262) 218-2915

Sign Regulations in Richmond Town, New York

Richmond Town, New York has specific sign regulations covering 14 sign types across 2 zoning districts. Regulated sign types include General Sign (Not Otherwise Specified), Ground Sign (Shopping Center/Plaza/Mall Identification), Wall Sign (Each Principal Activity, Commercial). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Richmond Town, New York

Sample Sign Requirements in Richmond Town

Sign TypeMax HeightMax AreaSetback
General Sign (Not Otherwise Specified)20 feet overall height32 square feet per sideNot listed
Ground Sign (Shopping Center/Plaza/Mall Identification)Not listed100 square feetNot listed
Wall Sign (Each Principal Activity, Commercial)Not listed40 square feetNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Richmond TownFull Coverage

Sign Types Covered

14

  • General Sign (Not Otherwise Specified)
  • Ground Sign (Shopping Center/Plaza/Mall Identification)
  • Wall Sign (Each Principal Activity, Commercial)
  • Directional Sign (Off-Premises, For Business/Industry)
  • +2 more types

Zoning Districts

2

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Richmond Town

Frequently Asked Questions

In Richmond Town, the height limit for Directional Sign (Off-Premises, For Business/Industry) is 12 feet (from ground within 5 ft of sign) (Sec. 200-28(D)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Richmond Town require a permit. From the submission notes on this page: All signs associated with multiple principal activities (such as a shopping center, plaza, mall, or other multiple commercial use facility) shall reflect a reasonable uniformity of design, lighting and materials; this guides official review but no explicit sign plan submission process is specified in the provided text. Run a code check for an exact address to see the permit requirements for that zone.

Richmond Town's sign code covers 14 sign types, including General Sign (Not Otherwise Specified), Ground Sign (Shopping Center/Plaza/Mall Identification), Wall Sign (Each Principal Activity, Commercial), and Directional Sign (Off-Premises, For Business/Industry). Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: No permit shall be required for the erection of temporary signs indicating that property is for sale or for rent. The full list is on this page.

In Richmond Town, Occupant/Home Occupation Identification Sign in the Residential districts must be set back at least 10 feet from any lot line (Sec. 200-28(G)(1)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Richmond Town's sign ordinance that cover digital, changing, or flashing signs: No sign shall be illuminated by or contain a flashing, intermittent, rotating or moving light or lights. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Richmond Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Richmond Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Richmond Town, New York Sign Rules at a Glance

Richmond Town, New York regulates 14 sign types across 2 zoning districts. Temporary Signs (Subdivision Sale) are capped at 10 feet tall and 32 square feet (Sec. 200-28(E)(2)). Most commercial signs in Richmond Town require a permit.

Detailed Sign Ordinance Requirements for Richmond Town, New York

Sign Rules by Zoning District in Richmond Town (2 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1020 feet overall height100 square feetNot listed
Residential districts410 feet40 square feetNot listed

Zone-by-Zone Sign Requirements in Richmond Town

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
General Sign (Not Otherwise Specified)20 feet overall height32 square feet per sideNot listedNot listedNo more than two sides per signNot listedNot listedUnlock§ 200-28(A), (B), (C); (G) applies only to 'Residential districts'
Ground Sign (Shopping Center/Plaza/Mall Identification)Not listed100 square feetNot listedNot listedOne per center/facilityAt the center/facility as a wholeNot listedUnlock§ 200-28(C)(1)
Wall Sign (Each Principal Activity, Commercial)Not listed40 square feetNot listedNot listedOne per principal activityOn the wall of the individual principal activityNot listedUnlock§ 200-28(C)(2)
Directional Sign (Off-Premises, For Business/Industry)12 feet (from ground within 5 ft of sign)16 square feet per sideNot listed20-60 feet from highway boundaryOne off-premises directional sign per business/industryOff-premises, not fronted on a state highwayNot listedUnlock§ 200-28(D)
Temporary Sign (Campaign/Event)Not listed32 square feetNot listedNot listedNot listedNot listedNot listedUnlock§ 200-28(E)(1), (H)(1), (H)(2)(f)
Temporary Sign (Subdivision Sale)10 feet32 square feetNot listedNot listedMax two signs on original parcel (§ 200-28(E)(3))On property related to subdivisionNot listedUnlock§ 200-28(E)(2)
Property Owner Restriction SignNot listed14 inches x 20 inches (minimum)Not listedNot listedNot listedConspicuous location, permanently mounted on the premisesNot listedUnlock§ 131-4(A), (B)
Dumpster/Bulk Disposal Container Restriction SignNot listedNot listedNot listedNot listedNot listedOn or near the bulk refuse containerNot listedUnlock§ 168-19

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Occupant/Home Occupation Identification Sign4 feet (if freestanding, above ground at location)4 square feet per sideNot listedNot less than 10 feet from any lot lineNot listedAt least 10 feet from any lot lineNot listedUnlock§ 200-28(G)(1)
Farm/Multiple-Family Dwelling Identification Sign6 feet above grade32 square feetNot listedNo closer to any lot line than 1/2 required setbackOneNot closer to any lot line than half the required setbackNot listedUnlock§ 200-28(G)(2)
Real Estate Sign (Residential Districts)10 feet32 square feetNot listedAt least 5 feet inside the property lineOne per 250 feet of road frontageOn the premises being sold/leased/rented; not less than 5 feet from property lineNot listedUnlock§ 200-28(G)(3), (H)(1)
Permanent Subdivision Sign7 feet40 square feetNot listedNot listedOne per subdivisionAt subdivisionNot listedUnlock§ 200-28(G)(4)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Richmond Town with a free PermitPal account.

Run a free code check

Prohibited Signs in Richmond Town

  • No billboards or signs shall be hereafter erected, placed or maintained in the Town unless specifically hereinafter permitted or unless a permit therefor has been obtained in compliance with the provisions of this section.
  • No sign shall be illuminated by or contain a flashing, intermittent, rotating or moving light or lights.
  • No sign shall employ any mirror or mirror-like surface in its construction.
  • No sign or part thereof shall contain or consist of any banner, pennant, ribbon, streamer, spinner or other similar moving, fluttering or revolving device. These devices, as well as strings of light, shall not be used for advertising or attracting attention whether or not they are part of any sign.
  • No luminous sign shall be placed or directed so as to cause glare upon any public street, highway or sidewalk or adjacent premises or otherwise to cause glare or reflection that may constitute a traffic hazard or nuisance.
  • No vehicle on which is placed or painted any sign shall be parked or stationed in a manner primarily intended to display the sign.
  • No sign shall be erected or maintained within the right-of-way.
  • No sign, unless otherwise provided for, shall be erected or maintained having an area greater than 32 square feet per side, and no sign shall have more than two sides.
  • No sign shall exceed 20 feet in overall height, measured from the highest level of natural ground immediately beneath the sign to the highest point of the sign or the supporting structure.
  • Temporary signs shall not obstruct or impair vision or traffic in any manner or create a hazard or disturbance to the health and welfare of the general public.
  • Any sign which no longer advertises a bona fide business being conducted on the premises or within the Town shall be removed from said premises within 10 days from the receipt of a written order to do so from the Code Enforcement Officer.

Exempt Signs in Richmond Town

  • No permit shall be required for the erection of temporary signs indicating that property is for sale or for rent.
  • Signs not exceeding one square foot in area and bearing only property numbers, post box numbers, names of occupants or premises or other identification of premises not having commercial connotations are exempt.
  • Flags and insignia of any government except when displayed in connection with commercial promotion are exempt.
  • Legal notices, identification, information or directional signs erected or required by governmental bodies are exempt.
  • Integral decorative or architectural features of buildings, except letters, trademarks, moving parts or moving lights, are exempt.
  • Signs directing and guiding traffic and parking on private property, but bearing no advertising matter, are exempt.
  • Temporary signs announcing a campaign drive or an event of a governmental, political, civic, philanthropic, educational or religious nature are exempt.

Sign Plan & Submission Notes for Richmond Town

  • All signs associated with multiple principal activities (such as a shopping center, plaza, mall, or other multiple commercial use facility) shall reflect a reasonable uniformity of design, lighting and materials; this guides official review but no explicit sign plan submission process is specified in the provided text.
  • No explicit requirement for a master sign plan, formal sign plan, or sign variance meeting is stated in the provided text.

Source: ecode360 municipal code