Questions? Call us at (262) 218-2915

Sign Regulations in Rye Brook, New York

Rye Brook, New York has specific sign regulations covering 27 sign types across 1 zoning districts. Regulated sign types include Animated Sign, Banner, Building Marker. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rye Brook, New York

Sample Sign Requirements in Rye Brook

Sign TypeMax HeightMax AreaSetback
Flag25 ft (pole)20 sq ftNot listed
Temporary Sign - Real EstateNot listed4 sq ftNot listed
Temporary Sign - Construction Site (≤2 acres)5 ft8 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Rye BrookPartial Coverage

Sign Types Covered

27

  • Animated Sign
  • Banner
  • Building Marker
  • Building Sign
  • +2 more types

Zoning Districts

1

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rye Brook

Municipal Code1 permit application link available

Frequently Asked Questions

In Rye Brook, the height limit for Temporary Sign - Construction Site (>2 acres, <5 acres) is 6 ft (Sec. 250-35F(1)(b)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rye Brook require a permit. From the submission notes on this page: If site plan approval is required under Chapter 209, Site Plan Review, and the sign(s) conforms with all requirements, the sign permit application is referred to the designated approval authority. Run a code check for an exact address to see the permit requirements for that zone.

Rye Brook's sign code covers 27 sign types, including Animated Sign, Banner, Building Marker, and Building Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Numbers on property used only for residential purposes. The full list is on this page.

We haven't published Rye Brook's sign setback rules on this page yet. Run a code check for an exact address to see them.

Rye Brook's sign code lists Animated Sign as a sign type, but this page doesn't quote the code's rules for digital or LED signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Rye Brook Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rye Brook, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Rye Brook, New York Sign Rules at a Glance

Rye Brook, New York regulates 27 sign types across 1 zoning district. Temporary Signs - Construction Site (≤2 acres) are capped at 5 ft tall and 8 sq ft (Sec. 250-35F(1)(b)). Most commercial signs in Rye Brook require a permit.

Detailed Sign Ordinance Requirements for Rye Brook, New York

Sign Rules by Zoning District in Rye Brook (1 zone)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones2725 ft (pole)40% of window/door areaNot listed

Zone-by-Zone Sign Requirements in Rye Brook

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
BannerNot listedNot listedNot listedNot listedNot listedMounted to a pole or a buildingNot listedUnlock§250-35C (Definitions: Banner)
Building MarkerNot listedNot listedNot listedNot listedNot listedOn buildingNot listedUnlock§250-35C (Definitions: Building Marker)
Flag25 ft (pole)20 sq ftNot listedNot listedNot listedNot listedNot listedUnlock§250-35C (Definitions: Flag)
Temporary Sign - Real EstateNot listed4 sq ftNot listedNot listed1 per street frontage (less than 5 acres), additional for larger lotsOn property for sale, lease, or rentNot listedUnlock§250-35F(1)(a)
Temporary Sign - Construction Site (≤2 acres)5 ft8 sq ftNot listedNot listed1On construction siteNot listedUnlock§250-35F(1)(b)
Temporary Sign - Construction Site (>2 acres, <5 acres)6 ft32 sq ftNot listedNot listed1 (plus 1 additional for sites >5 acres with 2+ street frontages)On construction siteNot listedUnlock§250-35F(1)(b)
Temporary Sign - WindowNot listed40% of window/door areaNot listedNot listedNot listedInterior of building window/glass doorNot listedUnlock§250-35F(1)(c)
Temporary Commercial Sign (not covered elsewhere)Not listed4 sq ftNot listedNot listed1 per lot/businessNot listedNot listedUnlock§250-35F(1)(h)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Rye Brook with a free PermitPal account.

Run a free code check

Prohibited Signs in Rye Brook

  • All signs not expressly permitted by this section are prohibited.
  • It is unlawful to install, create, erect or modify any sign requiring a permit without such a permit.
  • It is unlawful to install, create, erect or modify any sign in a way that is inconsistent with any plan or permit governing such sign or the lot on which the sign is located.
  • It is unlawful to fail to remove any sign that is installed, created, erected or modified in violation of this section, or for which the sign permit has lapsed.
  • It is unlawful to install, create, erect, modify or maintain a sign in violation of the Sign Law.
  • No signs shall be erected in the public right-of-way except as specifically allowed for certain public or governmental uses or under emergency conditions.
  • No permanent signs shall be allowed in the public right-of-way, except for those specified under Subsection G.
  • No temporary signs shall be allowed in public right-of-way, except for emergency warning signs erected by a governmental agency, public utility company, or a contractor doing permitted work.
  • Permanent signs on private property are allowed only in conformity with specified tables and subject to area and dimension limitations.
  • Any sign not in conformance with an approved plan or permit is prohibited.

Exempt Signs in Rye Brook

  • Any public notice or warning required by a valid and applicable federal, state or local law or regulation.
  • Any sign inside a building, not attached to a window or door and not located within four feet of the window or door that is not legible from a distance of more than three feet beyond the lot line of the lot or parcel on which such sign is located or 25 feet from the face of the window, whichever is less.
  • Traffic control signs on private property, such as Stop, Yield and similar signs, the face of which meet Department of Transportation standards and which contain no commercial message of any sort.
  • Numbers on property used only for residential purposes.
  • Public notification signs installed in accordance with § 250-40.

Sign Plan & Submission Notes for Rye Brook

  • If site plan approval is required under Chapter 209, Site Plan Review, and the sign(s) conforms with all requirements, the sign permit application is referred to the designated approval authority.
  • If the sign application is not subject to site plan approval but conforms with all requirements, it is referred to the Board of Architectural Review.
  • If site plan approval was required and the signage plan was approved in connection with site plan review, the Building Inspector shall forward the completed application to the Board of Architectural Review for the proposed sign plan.
  • The Building Inspector shall issue the sign permit upon notice of approval for the sign plan from the Board of Architectural Review, provided the approved plan conforms in every respect with this section.
  • A permit for additional signage for a use or lot shall cover the total signage if a permit is required for the sign type concerned.
  • Applications for sign permits must be accompanied by plans and surveys for review as part of permit procedure.
  • Any sign subject to permit procedures must conform to an approved plan or permit; modifications or additions require a new or amended permit.

Source: ecode360 municipal code