Sign Regulations in Town of Erwin, New York

Town of Erwin, New York has specific sign regulations covering 39 sign types across 5 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Permanent Changeable Message/Marquee (Wall). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 16, 2026

Sign Regulation Overview for Town of Erwin, New York

Sample Sign Requirements in Town of Erwin

Sign TypeMax HeightMax AreaSetback
On-site Real Estate Sign (Residential Use)4 ft8 sq ft per sign faceGeneral minimum 10 ft from any lot line applies to all signs unless otherwise specified (§130-81(B)(10))
On-site Real Estate Sign (Business/Industrial Use)5 ft30 sq ft per sign faceGeneral minimum 10 ft from any lot line applies unless otherwise specified (§130-81(B)(10))
Contractor/Construction Sign5 ft32 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Town of ErwinFull Coverage

Sign Types Covered

39

  • Wall Sign
  • Freestanding Sign
  • Permanent Changeable Message/Marquee (Wall)
  • Permanent Changeable Message/Marquee (Freestanding)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Town of Erwin

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

Sign height limits in Town of Erwin vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Town of Erwin, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Town of Erwin, regulated sign types include Wall Sign, Freestanding Sign, Permanent Changeable Message/Marquee (Wall), Permanent Changeable Message/Marquee (Freestanding), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Town of Erwin vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Town of Erwin are regulated with specific requirements for brightness, animation, and message duration. Town of Erwin has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Town of Erwin Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Town of Erwin, New York sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Town of Erwin, New York Sign Rules at a Glance

Town of Erwin, New York regulates 39 sign types across 5 zoning districts. Directional Sign (On-site)s in the General Regulations For All Zones zoning district are capped at 4 ft above grade tall and 4 sq ft per sign face, with a ≥5 ft from lot line setback (Sec. §130-81(D)(3)(a)-(c)). Most commercial signs in Town of Erwin require a permit.

Detailed Sign Ordinance Requirements for Town of Erwin, New York

Sign Rules by Zoning District in Town of Erwin (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones265 ft32 sq ft
Town Center (TC), Business 1 – Community Service (B1), Business 2 – Office/Commercial District (B2), Business 3 – Neighborhood Services District (B3), Multi-Use District (MU)9Not higher than 15 ft on a multi-story building; not higher than the face of a single-story building≤50 sq ft per wall sign
Regional Service (RS), Industrial 1 (I-1), Industrial 2 (I-2)5Not higher than, or exceeding 15 ft; and any wall sign that projects above the first floor whichever is lowerPer sign: ≤155 sq ft (text shows “one hundred fifty five (150) SF”); Total site wall signage: ≤1.0 sq ft/lf or 300 sq ft (lesser)
Rural District (RD)6Not higher than, or exceeding 10 ft; or projecting above first floor whichever lower35 sq ft
Low Density Residence (R-12.5), Medium Density Residence (R-10), High Density Residence (R-7.2)6Top of sign or bracket ≤14 ft above lowest manmade or natural grade20 sq ft

Zone-by-Zone Sign Requirements in Town of Erwin(sample of 3 of 5 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
On-site Real Estate Sign (Residential Use)4 ft8 sq ft per sign faceGeneral minimum 10 ft from any lot line applies to all signs unless otherwise specified (§130-81(B)(10))Unlock§130-81(C)(1); §130-81(B)(4)-(5), (11)
On-site Real Estate Sign (Business/Industrial Use)5 ft30 sq ft per sign faceGeneral minimum 10 ft from any lot line applies unless otherwise specified (§130-81(B)(10))Unlock§130-81(C)(1); §130-81(B)(4)-(5), (11)
Contractor/Construction Sign5 ft32 sq ftPlaced upon the premises where construction is proposed or underwayUnlock§130-81(C)(2)
Permanent Subdivision Identification Sign5 ft20 sq ft per sign faceOne per subdivisionOne on-site identification sign per subdivisionUnlock§130-81(C)(11)
Civic/Religious/Educational/Institutional/Social/Membership Club Identification Sign5 ft20 sq ft per sign faceOne per facilityOne on-site sign for qualifying facilitiesUnlock§130-81(C)(12)
Apartment/Mobile Home Park Identification Sign (Principal)5 ft20 sq ft per sign faceOne principal identification sign permittedOn-site for apartment complexes or manufactured/mobile home parksUnlock§130-81(D)(1)(a)
Apartment/Mobile Home Park Identification Sign (Second - Special Use Permit)5 ft20 sq ft per sign faceSecond principal identification sign requires special use permitOn-site for apartment complexes or manufactured/mobile home parksUnlock§130-81(D)(1)(b)
Directional Sign (On-site)4 ft above grade4 sq ft per sign face≥5 ft from lot lineTwo on-site directional signs permittedIndicating or calling attention to traffic entrances/exits; permanently affixed to the groundUnlock§130-81(D)(3)(a)-(c)

Town Center (TC), Business 1 – Community Service (B1), Business 2 – Office/Commercial District (B2), Business 3 – Neighborhood Services District (B3), Multi-Use District (MU)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignNot higher than 15 ft on a multi-story building; not higher than the face of a single-story building≤50 sq ft per wall signGeneral minimum 10 ft from any lot line (§130-81(B)(10))Two per business (one per wall)Mounted on building façade(s) owned or rented by the businessUnlockTable 130-81-1 (Wall, columns TC through MU); §130-81(B)(3)(a); §130-81(B)(1)(h), (11)
Freestanding Sign8 ft4 ftGeneral minimum 10 ft from lot lines (§130-81(B)(10))Typically one per principal site (see §130-81(B)(3)(a))On-site; not in the right-of-way; oriented towards and visible from the public roadUnlockTable 130-81-1 (Freestanding, columns TC through MU); §130-81(B)(3)(a), (7), (11), (14)
Window SignPer window sign ≤30% of contiguous window area; aggregate ≤0.5 sq ft per linear foot of building frontageUp to 4 per businessOn windows of the businessUnlockTable 130-81-1 (Window, columns TC through MU)
Permanent Changeable Message/Marquee (Wall)Per wall sign limits of this zone (≤15 ft or ≤face of single-story)≤50 sq ft per wall sign; building-level cap per formulaOn building façadeUnlockTable 130-81-1 (Permanent Changeable Message/Marquee, columns TC through MU); §130-81(B)(1)(g), (11)
Permanent Changeable Message/Marquee (Freestanding)5 ft6 ftGeneral minimum 10 ft from lot lines (§130-81(B)(10))On-site freestandingUnlockTable 130-81-1 (Permanent Changeable Message/Marquee, columns TC through MU); §130-81(B)(1)(g), (11)
Projecting SignTop of sign or bracket ≤14 ft above lowest manmade or natural grade6 sq ft per faceOne per businessProjecting from building façadeUnlockTable 130-81-1 (Projecting, columns TC through MU)
A-Frame/Sandwich Board (TC/MU)8 sq ft per faceOne per businessOn-site; not in right-of-wayUnlockTable 130-81-1 (A-Frame/Sandwich Board, TC and MU columns)
A-Frame/Sandwich Board (B3)16 sq ft (per face, inferred)Distance from road: 30 ft (inferred from fragment)One per businessOn-site; not in right-of-wayUnlockTable 130-81-1 (A-Frame/Sandwich Board, B3 column); text fragments following table: “Max Area: Sixteen (16) SF; Distance from road: Thirty (30) Ft.”

Regional Service (RS), Industrial 1 (I-1), Industrial 2 (I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignNot higher than, or exceeding 15 ft; and any wall sign that projects above the first floor whichever is lowerPer sign: ≤155 sq ft (text shows “one hundred fifty five (150) SF”); Total site wall signage: ≤1.0 sq ft/lf or 300 sq ft (lesser)General minimum 10 ft from lot lines (§130-81(B)(10))Subject to overall principal sign limit: one freestanding + two wall (§130-81(B)(3)(a))On building façadeUnlockTable 130-81-1 (Wall, columns RS and I-1/I-2); §130-81(B)(1)(h); §130-81(B)(3)(a); §130-81(B)(6)
Freestanding Sign12 ft10 ftGeneral minimum 10 ft from lot lines (§130-81(B)(10))Typically one per principal site (§130-81(B)(3)(a))On-site; oriented towards and visible from public roadUnlockTable 130-81-1 (Freestanding, columns RS and I-1/I-2); §130-81(E)(4)
Freestanding Sign - Shopping Mall (Two Curb Cuts)12 ft10 ftGeneral 10 ft from lot lines (§130-81(B)(10))Two (when qualifying condition is met)On-site at shopping mall frontagesUnlock§130-81(B)(3)(b)(i) (Shopping Mall Signs); Table 130-81-1 (Freestanding, RS/I columns for size)
Freestanding Sign - Shopping Mall (Multi-tenant)12 ft10 ftGeneral 10 ft from lot lines (§130-81(B)(10))OneOn-site at shopping mallUnlock§130-81(B)(3)(b)(ii); Table 130-81-1 (Freestanding, RS/I columns for size)
Wall Sign - Shopping Mall TenantNot higher than, or exceeding 15 ft; or projecting above first floor whichever lowerOne wall sign per tenantOn tenant façade within shopping mallUnlock§130-81(B)(3)(b)(iii)

PermitPal covers all 5 zoning districts in Town of Erwin — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 5 zones for Town of Erwin — start free

Prohibited Signs in Town of Erwin

  • Free Standing High Rise Signs are prohibited above the following heights: over 12 feet in any district except RS; over 16 feet in RS, I-1, and I-2
  • Translucent canopy signs (made of plastic or similar material), with or without backlighting, are prohibited
  • Roof signs are prohibited
  • Billboards are prohibited
  • Fuel pump advertisement signs are prohibited
  • Temporary advertisement signs are prohibited
  • Portable changeable message signs are prohibited
  • Any wall sign located higher than or exceeding fifteen (15) feet, or any wall sign that projects above the first floor of the structure (whichever is lower), is prohibited
  • Flashing signs and signs with moving parts are prohibited, except a public service sign (such as time and temperature) approved by the Code Enforcement Officer
  • Any sign not specifically listed as allowed in this Chapter is prohibited
  • No sign, except traffic signs placed by public agencies, may be erected, placed, maintained, or extended into the right-of-way of any street or highway
  • No sign shall be erected, placed, or maintained at or near street intersections so as to cause a traffic hazard or be confused with an authorized traffic sign, signal, or device; signs may not use words or symbols such as 'stop', 'look', 'drive-in', 'left', etc., in a manner that misleads or confuses traffic
  • All signs shall be set back a minimum of ten (10) feet from any lot line unless otherwise specified (or where the right-of-way line is wider, in which case the setback is determined case-by-case)
  • Sign illumination shall not be intermittent or flashing, shall not be of varying intensity, and may not produce glare beyond property lines
  • No sign shall be permitted over a public driveway or thoroughfare (Traffic Control Devices pursuant to 17 NYCRR Transportation Part 200 are exempt from this prohibition)
  • Any permitted sign that does not display a message for more than thirty (30) days must be removed

Exempt Signs in Town of Erwin

  • On-site real estate signs are permitted in any district without a building permit: max 8 sq ft and max 4 ft high for residential; max 30 sq ft and max 5 ft high for business and industrial
  • Architect, engineer, contractor, etc. signs on premises where construction is proposed or underway are permitted without a building permit; must be removed within 30 days after construction is completed; max 32 sq ft and max 5 ft high
  • Signs associated with the sale of seasonal agricultural crops are permitted without a building permit
  • Traffic or other municipal signs, legal notices, and temporary or non-advertising signs for government purposes are permitted without a building permit
  • Political signs are permitted without a building permit: max 6 sq ft; may be displayed starting 90 days prior to the election; must be removed within 1 week after the election; minimum 5 ft from any lot line; must not project more than 4 ft above grade
  • Special event signs (banners; A-frames/T-frames; curb or sidewalk signs; sandwich boards) are permitted without a building permit for craft shows, fairs/carnivals, antique car shows, and similar events as determined by the Code Enforcement Officer; may be displayed for up to 3 weeks and must be removed within 1 week after the event; max 20 sq ft and max 5 ft high
  • All signs, certificates, and licenses mandated by local, county, state, or federal law or authority are permitted without a building permit
  • Fuel pump price signs are permitted without a building permit if no larger than the minimum size required by NYS law
  • Nameplate sign for a permitted home occupation is permitted without a building permit: max 2 sq ft; must be mounted at the business entrance of the dwelling
  • Temporary subdivision signs are permitted without a building permit: on-site, non-illuminated, max 20 sq ft per face, max 5 ft high; must be removed within 4 years of installation or once 50% of lots are sold, whichever is sooner
  • Permanent subdivision identification sign is permitted without a building permit: one on-site sign per subdivision; max 20 sq ft per face; max 5 ft high
  • Civic, religious, educational, institutional, social, membership club, and similar facilities may display one on-site sign without a building permit: max 20 sq ft per face; max 5 ft high
  • Traffic Control Devices pursuant to 17 NYCRR Transportation Part 200 are exempt from the prohibition on signs over a public driveway or thoroughfare
  • Safety signs, road signs, historical markers, and highway directional signs erected by municipal or public agencies are exempt from the sign height and width calculation provisions

Sign Plan & Submission Notes for Town of Erwin

  • All signs other than those permitted signs listed in §130-81 B require building permits
  • All permitted special sales signs require building permits
  • Nonresidential signage (General, Business, Light Industrial, and other nonresidential uses) is permitted through Site Plan Review approval; signage must comply with Table 130-81-1 and related provisions
  • The following signs are permitted in any district subject to Site Plan Review: (a) identification signs for apartment complexes or manufactured/mobile home parks (one principal sign allowed; a second principal sign requires a special use permit); (b) V-type signs for those uses subject to angle and area limits; (c) on-site directional signs; (d) special sales signs
  • Use variance required to allow construction, placement, or continued use of any sign that is prohibited, illegal, or not specifically permitted; to allow a sign in RS, I-1, or I-2 greater than 16 feet in height; or to allow a sign in non-RS/I districts greater than 12 feet in height
  • Area variance required to allow: a sign in RS, I-1, or I-2 that is greater than 12 feet but not greater than 16 feet; a sign in non-RS/I districts that is greater than 8 feet but not greater than 12 feet; or any sign that exceeds dimensional requirements in §130-81 (except where covered by the height-specific variance provisions)

Source: other municipal code