Questions? Call us at (262) 218-2915

Sign Regulations in Boiling Springs, North Carolina

Boiling Springs, North Carolina has specific sign regulations covering 14 sign types across 8 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Wall Sign (Nonresidential Uses). Height restrictions apply. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Boiling Springs, North Carolina

Sample Sign Requirements in Boiling Springs

Sign TypeMax HeightMax AreaSetback
Wall Sign (Nonresidential Uses)Not listed10% of building wall area (max 100 sq ft)Not listed
Freestanding Sign (Nonresidential Uses)Not listed32 sq ft per sign faceNot listed
Freestanding Sign (Residential Subdivisions/Townhome/Multifamily)Not listed32 sq ft per sign faceNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Boiling SpringsPartial Coverage

Sign Types Covered

14

  • Wall Sign
  • Freestanding Sign
  • Wall Sign (Nonresidential Uses)
  • Freestanding Sign (Nonresidential Uses)
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Height restrictions
  • Illumination rules

Official Resources for Boiling Springs

City WebsiteMunicipal Code4 permit application links available

Frequently Asked Questions

In Boiling Springs, the height limit for Freestanding Sign in the B-2 and M-1 districts is 15 ft; up to 20 ft if >300 ft from residential district (Sec. 11.6.3.(B)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

From the submission notes on this page: No mention of a required sign plan, master sign plan, or variance meeting is found in the provided sections. Run a code check for an exact address to see the permit requirements for that zone.

Boiling Springs's sign code covers 14 sign types, including Wall Sign, Freestanding Sign, Wall Sign (Nonresidential Uses), and Freestanding Sign (Nonresidential Uses). The ordinance lists 1 exemption. One of them: Signs required to be installed by any local, state, or federal rule, regulation or ordinance may be displayed in accordance with the standard establishing their size and placement (e.g. building address signs, fire safety signage). The full list is on this page.

This page doesn't list a single setback distance for signs in Boiling Springs. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Boiling Springs's sign ordinance that cover digital, changing, or flashing signs: No changeable copy feature, either manual or electronic, is permitted to be included on a projecting sign. No changeable copy feature, either manual or electronic, is permitted to be included on a canopy sign. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Boiling Springs Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Boiling Springs, North Carolina, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Boiling Springs, North Carolina Sign Rules at a Glance

Boiling Springs, North Carolina regulates 14 sign types across 8 zoning districts. Entrance Drive Signs (Incidental) are capped at 3 ft tall and 4 sq ft (Sec. 11.6.7.(D)).

Detailed Sign Ordinance Requirements for Boiling Springs, North Carolina

Sign Rules by Zoning District in Boiling Springs (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential districts3Not listed32 sq ft per sign faceNot listed
I-1, O&CS, B-2 and M-1 districts1Not listed20% of building wall or tenant space (max 200 sq ft)Not listed
B-2 and M-1 districts215 ft; up to 20 ft if >300 ft from residential district60 sq ft per street frontage, up to max 100 sq ft per faceNot listed
B-1, I-1 and O&CS districts110 ft32 sq ft per street frontage, up to max 80 sq ft per faceNot listed
B-1 district1Not listed10% of building wall or tenant space (max 100 sq ft)Not listed
B-1, B-2, and O&CS districts1Not listed16 sq ft per projecting sign faceNot listed
B-1, B-2, O&CS, and M-1 districts1Not listedUp to 50% of window/door areaNot listed
General Regulations For All Zones63 ft4 sq ftNot listed

Zone-by-Zone Sign Requirements in Boiling Springs(sample of 3 of 8 zones)

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Nonresidential Uses)Not listed10% of building wall area (max 100 sq ft)Not listedNot listed1 per permitted building wallOn any building wall that faces a streetNot listedUnlockSec. 11.6.2.(A)
Freestanding Sign (Nonresidential Uses)Not listed32 sq ft per sign faceNot listedNot listed1 per street frontage (nonresidential uses)One per street frontageNot listedUnlockSec. 11.6.3.(A)
Freestanding Sign (Residential Subdivisions/Townhome/Multifamily)Not listed32 sq ft per sign faceNot listedNot listed1 per street entranceOne per street entranceNot listedUnlockSec. 11.6.3.(A)

B-2 and M-1 districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign15 ft; up to 20 ft if >300 ft from residential district60 sq ft per street frontage, up to max 100 sq ft per faceNot listedNot listed1 per street frontage1 per street frontage; must be 100 ft apart on different frontagesNot listedUnlockSec. 11.6.3.(B)
Canopy SignNot listed24 sq ft per sign (up to 20% of valance area)Not listedNot listed1 per side of canopyOn freestanding or attached canopies covering vehicle use areas (e.g., fueling/passenger drop-off)Not listedUnlockSec. 11.6.6.

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning SignNot listedNot listed80% of awning valance widthNot listed1 per awning over customer entranceOn awnings covering customer entrancesNot listedUnlockSec. 11.6.4.
Suspended Pedestrian Sign (Incidental)Not listed4 sq ftNot listedNot listed1 per entranceSuspended from awning/canopy/pedestrian cover directly in front of customer entranceNot listedUnlockSec. 11.6.7.(A)
Pedestrian Wall Sign (Incidental)Not listed4 sq ftNot listedNot listed1 per entranceImmediately adjacent to each customer entrance (within 4 ft of entrance)Not listedUnlockSec. 11.6.7.(B)
Entrance Drive Sign (Incidental)3 ft4 sq ftNot listedWithin 15 ft of intersection of driveway and street right-of-way1 per side of entranceOn each side of street entrance to parking area or drivewayNot listedUnlockSec. 11.6.7.(D)
On-Premise Directional Sign (Incidental)3 ft4 sq ftNot listedNot listedNot listedNot listedNot listedUnlockSec. 11.6.7.(E)
Regulatory Sign (Required by statute)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlockSec. 11.6.7.(F)

PermitPal covers all 8 zoning districts in Boiling Springs. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Boiling Springs

  • Permanently installed signs that do not comply with these regulations are prohibited unless explicitly exempted by the provisions of this article.
  • Wall signs shall not extend above the building wall.
  • Cabinet or box style wall signs are prohibited in the B-1 district.
  • Wall signs shall not project more than 12 inches from the wall upon which they are mounted in the B-1 district.
  • No changeable copy feature, either manual or electronic, is permitted to be included on a projecting sign.
  • No changeable copy feature, either manual or electronic, is permitted to be included on a canopy sign.

Exempt Signs in Boiling Springs

  • Signs required to be installed by any local, state, or federal rule, regulation or ordinance may be displayed in accordance with the standard establishing their size and placement (e.g. building address signs, fire safety signage).

Sign Plan & Submission Notes for Boiling Springs

  • No mention of a required sign plan, master sign plan, or variance meeting is found in the provided sections.

Source: municode municipal code