Sign Regulations in Rolesville, North Carolina
Rolesville, North Carolina has specific sign regulations covering 18 sign types across 3 zoning districts. Regulated sign types include Freestanding Sign (on single-family lots), Freestanding Sign (other permissible uses), Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Rolesville, North Carolina
Sample Sign Requirements in Rolesville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign (on single-family lots) | 4 feet | 8 square feet | Not listed |
| Freestanding Sign (other permissible uses) | 4 feet | 32 square feet | Not listed |
| Wall Sign | Not listed | 24 square feet | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
18
- Freestanding Sign (on single-family lots)
- Freestanding Sign (other permissible uses)
- Wall Sign
- Residential Development Entrance Sign
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Rolesville
Other Cities in North Carolina
Frequently Asked Questions
In Rolesville, the height limit for Freestanding Sign (Multi-tenant Building, development over 100,000 sq ft) in the Business Districts (O&P, C, C-O, C-W, I, I-W, R&PUD (non-residential uses)) is 15 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Rolesville require a permit. From the submission notes on this page: All applications for a freestanding sign permit must be accompanied by an engineer's sealed footing drawing and calculations. Run a code check for an exact address to see the permit requirements for that zone.
Rolesville's sign code covers 18 sign types, including Freestanding Sign (on single-family lots), Freestanding Sign (other permissible uses), Wall Sign, and Residential Development Entrance Sign. Most commercial signs need a permit. The ordinance lists 2 exemptions. One of them: Wall-mounted banners do not require issuance of a building permit, provided all other conditions of Section 11.3 are met. The full list is on this page.
In Rolesville, Freestanding Sign in the Business Districts (O&P, C, C-O, C-W, I, I-W, R&PUD (non-residential uses)) must be set back at least 5 feet from street right-of-way. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rolesville's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Rolesville Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rolesville, North Carolina, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Rolesville, North Carolina Sign Rules at a Glance
Rolesville, North Carolina regulates 18 sign types across 3 zoning districts. Freestanding Monument Signs (individual parcel/lease lot) are capped at 6 feet tall and 60 square feet. Most commercial signs in Rolesville require a permit.
Detailed Sign Ordinance Requirements for Rolesville, North Carolina
Sign Rules by Zoning District in Rolesville (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential Districts (R-40W, R-80W, R-IS, R-I, R-ID, R-II, R-IID, R&PUD (residential uses), UMH, R-MH) | 4 | 8 feet | 32 square feet | Not listed |
| Business Districts (O&P, C, C-O, C-W, I, I-W, R&PUD (non-residential uses)) | 9 | Bottom of sign maximum 18 inches below bottom of canopy face | 120 square feet | Not listed |
| General Regulations For All Zones | 5 | Bottom of sign maximum 18 inches below bottom of canopy face | 72 square feet | Not listed |
Zone-by-Zone Sign Requirements in Rolesville
Residential Districts (R-40W, R-80W, R-IS, R-I, R-ID, R-II, R-IID, R&PUD (residential uses), UMH, R-MH)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (on single-family lots) | 4 feet | 8 square feet | Not listed | Not listed | 1 | On residential single-family lots | Not listed | Unlock | Section 11.3.1, Table (Residential Zones), and footnotes 1a-d |
| Freestanding Sign (other permissible uses) | 4 feet | 32 square feet | Not listed | Not listed | 1 | On lots with permissible non-single-family residential uses | Not listed | Unlock | Section 11.3.1, Table (Residential Zones), and footnotes 1a-d |
| Wall Sign | Not listed | 24 square feet | Not listed | Not listed | 1 | On building wall. No projection above roofline except for parapet walls. No projection more than 18 inches from building wall. | Not listed | Unlock | Section 11.3.1, Table; Footnote 2 and 3 |
| Residential Development Entrance Sign | 8 feet | 32 square feet | Not listed | Not listed | 1 | At residential development entrance | Not listed | Unlock | Section 11.3.1, Table (Residential Zones) 'Signs located at Residential Development Entrances' |
Business Districts (O&P, C, C-O, C-W, I, I-W, R&PUD (non-residential uses))
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | 12 feet | 80 square feet | Not listed | Not less than 5 feet from street right-of-way; outside of vehicular site triangles | 1 per street frontage, 2 maximum | One per street frontage, two maximum per lot | Not listed | Unlock | Section 11.3.1, Table (Business Districts); Footnotes 1a-f; Section 11.3.3 Table |
| Freestanding Sign (Multi-tenant Building, development up to 100,000 sq ft) | 12 feet | 100 square feet | Not listed | Not less than 5 feet from street right-of-way; outside of vehicular site triangles | 1 per street frontage, 2 maximum | 1 per street frontage, 2 maximum | Not listed | Unlock | Section 11.3.2, Table |
| Freestanding Sign (Multi-tenant Building, development over 100,000 sq ft) | 15 feet | 120 square feet | Not listed | Not less than 5 feet from street right-of-way; outside of vehicular site triangles | 2 per street frontage, 3 maximum | 2 per street frontage, 3 maximum | Not listed | Unlock | Section 11.3.2, Table |
| Wall Sign (Building up to 100,000 sq ft) | Not listed | Greater of 60 sq ft or 10% of frontage wall area | Not listed | Not listed | Not listed | Affixed to building wall or canopy; uniform vertical and horizontal location encouraged | Not listed | Unlock | Section 11.3.1 (Wall), 11.3.2, Table; Footnotes 2, 3; 11.3.3 (Wall Signs) |
| Wall Sign (Building over 100,000 sq ft) | Not listed | Greater of 60 sq ft or 7% of frontage wall area | Not listed | Not listed | Not listed | Affixed to building wall or canopy; uniform vertical and horizontal location encouraged | Not listed | Unlock | Section 11.3.1 (Wall), 11.3.2, Table; Footnotes 2, 3; 11.3.3 (Wall Signs) |
| Wall Sign (Multi-tenant Building, up to 100,000 sq ft including canopy face) | Not listed | Greater of 60 sq ft or 10% of frontage wall area | Not listed | Not listed | Not listed | Affixed to building wall or canopy; uniform vertical and horizontal location encouraged | Not listed | Unlock | Section 11.3.2, Table; Footnotes 2, 3; 11.3.3 (Wall Signs) |
| Wall Sign (Multi-tenant Building, over 100,000 sq ft including canopy face) | Not listed | Greater of 60 sq ft or 10% of frontage wall area | Not listed | Not listed | Not listed | Affixed to building wall or canopy; uniform vertical and horizontal location encouraged | Not listed | Unlock | Section 11.3.2, Table; Footnotes 2, 3; 11.3.3 (Wall Signs) |
| Canopy Under Hang Sign (Multi-tenant Building) | Bottom of sign maximum 18 inches below bottom of canopy face | 4 square feet | Not listed | Not listed | 1 per business | Under canopy in multi-tenant buildings | Not listed | Unlock | Section 11.3.2, Table |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (Subdivision entrance or multi-tenant sign) | 12 feet for pole sign (min 7-ft base); 8 feet for monument | 72 square feet | Not listed | Outside of vehicular site triangles; no less than 5 feet from street right-of-way | 1 per exterior road frontage, 2 maximum | Subdivision entrance or as multi-tenant sign; 1 per exterior road frontage, 2 maximum | Not listed | Unlock | Section 11.3.4, Table and Footnotes |
| Freestanding Monument Sign (individual parcel/lease lot) | 6 feet | 60 square feet | Not listed | Outside of vehicular site triangles; no less than 5 feet from street right-of-way | 1 per parcel or lease lot | Individual parcels or lease lots in non-residential subdivision | Not listed | Unlock | Section 11.3.4, Table and Footnotes |
| Wall Sign (Including canopy face, subdivision or non-residential use) | Not listed | Greater of 60 sq ft or 10% of frontage wall area | Not listed | Not listed | Not listed | Uniform vertical positions; centered or one side of storefront; canopy face allowed | Not listed | Unlock | Section 11.3.4, Table; Footnotes 2, 3; 11.3.5 |
| Canopy Sign | Bottom of sign maximum 18 inches below bottom of canopy face | 4 square feet | Not listed | Not listed | 1 per business | Under canopy | Not listed | Unlock | Section 11.3.4, Table |
| Wall-Mounted Banner | Not listed | 50% of total allowed wall sign area for banners; total of all banners plus permanent signs must not exceed total allowed wall sign area | Not listed | Not listed | Not listed | Wall-mounted, systematically affixed | Not listed | Unlock | Section 11.3.1, Table footnote 3 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Rolesville with a free PermitPal account.
Run a free code checkProhibited Signs in Rolesville
- No freestanding sign (temporary or permanent) shall encroach into any right-of-way, except as permitted by an encroachment agreement or other license executed by the governmental authority having control of such right-of-way.
- Poles and other supporting structures shall not be internally illuminated.
- No sign may project more than 18 inches from the building wall.
- No wall sign shall project above the roofline, except for parapet walls.
- Freestanding signs must be securely fastened to the ground so that there is virtually no danger that the sign may be moved by wind or other forces of nature and cause injury to persons or property.
- Wall-mounted banners and permanent wall signs combined shall not exceed the total wall sign area allowed in Section 11.3.
- Garish color schemes are not allowed.
Exempt Signs in Rolesville
- Wall-mounted banners do not require issuance of a building permit, provided all other conditions of Section 11.3 are met.
- Roof surfaces constructed at an angle of 75 degrees or more from horizontal are regarded as wall space for purposes of signage requirements.
Sign Plan & Submission Notes for Rolesville
- All applications for a freestanding sign permit must be accompanied by an engineer's sealed footing drawing and calculations.
- A sketch plan of the landscaped area with the name, quantity, and spacing of plants must be presented to the Planning Director as part of applying for a sign permit for a permanent freestanding sign.
- A pattern or scheme for colors is required (for commercial/multitenant and non-residential subdivisions).
Source: municode municipal code