Questions? Call us at (262) 218-2915

Sign Regulations in Selma, North Carolina

Selma, North Carolina has specific sign regulations covering 27 sign types across 4 zoning districts. Regulated sign types include Temporary Construction Fence Wrap, Temporary Flags, Temporary Projected Image. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Selma, North Carolina

Sample Sign Requirements in Selma

Sign TypeMax HeightMax AreaSetback
Temporary Air Activated, Balloon, InflatableNot listedUnlimited30 feet from centerline of road
Temporary Construction Fence WrapNot listedUnlimited first 24 months; after, 24 square feetNot listed
Temporary Flags20 feet15 square feet per flag30 feet from centerline of road

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for SelmaFull Coverage

Sign Types Covered

27

  • Temporary Construction Fence Wrap
  • Temporary Flags
  • Temporary Projected Image
  • Temporary People Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Selma

City WebsiteMunicipal Code4 permit application links available

Frequently Asked Questions

In Selma, the height limit for Permanent Monument Ground Sign in the IN, N-B, C-B, GB, IB, I-1, I-2, Non-residential Planned Unit Developments zoning districts is 25 feet (unless otherwise permitted). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Selma require a permit. From the submission notes on this page: A sign plan showing the location, size, height, style and method of illumination (if any) must be submitted as part of the zoning permit application for any sign to be constructed, erected, placed, or replaced. Run a code check for an exact address to see the permit requirements for that zone.

Selma's sign code covers 27 sign types, including Temporary Construction Fence Wrap, Temporary Flags, Temporary Projected Image, and Temporary People Sign. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Signs not exposed to view from a street or public access area are not signs for the purpose of these regulations. The full list is on this page.

In Selma, Permanent Monument Ground Sign in the IN, N-B, C-B, GB, IB, I-1, I-2, Non-residential Planned Unit Developments zoning districts must be set back 12 feet from right-of-way, 10 feet from side property lines. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Selma's sign ordinance that cover digital, changing, or flashing signs: Animated and Electronic Message Signs that change more frequently than every eight (8) seconds are prohibited. Flashing signs and flashing lighting shall not be permitted upon a sign. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Selma Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Selma, North Carolina, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Selma, North Carolina Sign Rules at a Glance

Selma, North Carolina regulates 27 sign types across 4 zoning districts. Temporary Flags in the RA, R-20, R-10, R-8, TR, MHP, Residential Planned Unit Developments zoning districts are capped at 20 feet tall and 15 square feet per flag, set back 30 feet from centerline of road. Most commercial signs in Selma require a permit.

Detailed Sign Ordinance Requirements for Selma, North Carolina

Sign Rules by Zoning District in Selma (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
RA, R-20, R-10, R-8, TR, MHP, Residential Planned Unit Developments1220 feet32 square feetNot listed
IN, N-B, C-B, GB, IB, I-1, I-2, Non-residential Planned Unit Developments1725 feet55 square feet if lot <200 ft frontage; 80 sq ft if >200 ftNot listed
General Regulations For All Zones142 inches above edge of pavement864 square inches (6 square feet)Not listed
Outdoor Advertising Sign Overlay District350 feet from main traveled way672 square feet per sign face (I-95); max 4 faces; U.S. 70: 500 sq ft per face; Buffalo Rd: 400 sq ft per faceNot listed

Zone-by-Zone Sign Requirements in Selma(sample of 3 of 4 zones)

RA, R-20, R-10, R-8, TR, MHP, Residential Planned Unit Developments

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Air Activated, Balloon, InflatableNot listedUnlimitedNot listed30 feet from centerline of road3On private property at least 30 feet from road centerlineNot listedUnlockSec. 17-1108.C/Table 11.2
Temporary Construction Fence WrapNot listedUnlimited first 24 months; after, 24 square feetNot listedNot listed1 per fenceAffixed to perimeter fencing at construction siteNot listedUnlockSec. 17-1108.C/Table 11.2
Temporary Flags20 feet15 square feet per flagNot listed30 feet from centerline of road3On private property at least 30 feet from road centerlineNot listedUnlockSec. 17-1108.C/Table 11.2
Temporary Yard Signs (less than 5 acres)Not listed2 square feetNot listed30 feet from centerline of road2 per 5 acres or portion thereofOn private property at least 30 feet from road centerlineNot listedUnlockSec. 17-1108.C/Table 11.2
Temporary Yard Signs (greater than 5 acres)Not listed32 square feetNot listed30 feet from centerline of road2 per 5 acres or portion thereofOn private property at least 30 feet from road centerlineNot listedUnlockSec. 17-1108.C/Table 11.2
Temporary Window SignsNot listed1 square footNot listedNot listed1Interior or exterior of windowNot listedUnlockSec. 17-1108.C/Table 11.2
Permanent Wall SignNot listed1 square footNot listedNot listed1 per structureOn structureNot listedUnlockSec. 17-1109.C.1
Permanent Ground-Mounted SignNot listed2 square feetNot listedNot listed1 per lotPer lotNot listedUnlockSec. 17-1109.C.2

IN, N-B, C-B, GB, IB, I-1, I-2, Non-residential Planned Unit Developments

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary BannerNot listed24 square feetNot listedNot listed1On propertyNot listedUnlockSec. 17-1108.D/Table 11.3
Temporary Feather Sign14 feetNot listed27 inches30 feet from centerline of road1 per 50 ft frontage, max 4 per lotOn property at least 30 feet from road centerlineNot listedUnlockSec. 17-1108.D/Table 11.3
Temporary Flags25 feet24 square feet eachNot listed30 feet from centerline of road3On property at least 30 feet from road centerlineNot listedUnlockSec. 17-1108.D/Table 11.3
Temporary Sandwich Board3 feet3 feet x 5 feet per side5 feetNot listed1 per businessOn propertyNot listedUnlockSec. 17-1108.D/Table 11.3
Temporary Yard SignsNot listed4 square feetNot listed30 feet from centerline of road1 per lot or 1 per 400 ft frontageOn property at least 30 ft from road centerlineNot listedUnlockSec. 17-1108.D/Table 11.3
Permanent Monument Ground Sign25 feet (unless otherwise permitted)55 square feet if lot <200 ft frontage; 80 sq ft if >200 ftNot listed12 feet from right-of-way, 10 feet from side property lines1 per property (see exception for additional frontage)At least 12 ft from edge of rights-of-way; at least 10 ft from side property linesNot listedUnlockSec. 17-1109.D/Table 11.5
Permanent Pole Ground Sign25 feet (standard pole); 50 feet for IB alternate pole sign55 square feet if lot <200 ft frontage; 80 sq ft if >200 ft; alternate for IB: 200 square feet per face, 2 facesNot listedStandard: 12 ft from right-of-way, 10 ft from side lines. IB alternate: 20 ft from ROW, 20 ft from side lines.1 per property; 2 if >100 ft frontage and both do not exceed 80 sq ft total (standard); For IB alternate: 1 monument and 1 poleAt least 12 ft from edge of rights-of-way; at least 10 ft from side property lines (alternate IB: 20 ft from right of way and side lines)Not listedUnlockSec. 17-1109.D/Table 11.5 and 11.6
Permanent Electronic Message Ground Sign25 feet55 square feet if lot <200 ft frontage; 80 sq ft if >200 ftNot listed12 feet from right-of-way, 10 feet from side property lines1 per lotMonument or pole sign location, as appropriateNot listedUnlockSec. 17-1109.D/Table 11.4, 17-1111

Outdoor Advertising Sign Overlay District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Outdoor Advertising Sign - Monopole or Metal I-Beam50 feet from main traveled way672 square feet per sign face (I-95); max 4 faces; U.S. 70: 500 sq ft per face; Buffalo Rd: 400 sq ft per face30 ft (height) x 60 ft (width) - face dimension10 ft from all property lines and edge of rights-of-wayNot listedWithin 300 ft of nearest edge of right-of-way of I-95, U.S. 70, Buffalo Rd (between Hwy 70 and Old Beulah Rd)Not listedUnlockSec. 17-1110; Table 11.7
Outdoor Advertising Sign - Non-Monopole (not digital)50 feet from main traveled way300 square feet per sign face; max 2 faces30 x 60 feet face dimension10 ft from property linesNot listedAs aboveNot listedUnlockSec. 17-1110; Table 11.7
Outdoor Advertising Sign - Digital50 feet from main traveled wayI-95: 672 sq ft per sign face; US 70: 500 sq ft per face; Buffalo: 400 sq ft per face. 2 faces max.30 x 60 feet face dimension10 ft from all property lines and edge of rights-of-wayNot listedSee aboveNot listedUnlockSec. 17-1110; Table 11.7

PermitPal covers all 4 zoning districts in Selma. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Selma

  • Roof signs are prohibited.
  • Snipe signs, including utility pole signs, are prohibited.
  • Simulated or unofficial public safety, warning or traffic signs are prohibited.
  • Animated and Electronic Message Signs that change more frequently than every eight (8) seconds are prohibited.
  • Motion signs including air-activated and balloon signs are prohibited, except for temporary feather signs or signs allowed in residential districts.
  • Vehicle message signs, permanent or temporary, are prohibited.
  • Signs located within sight triangles of intersections are prohibited.
  • Signs emitting glare that causes discomfort or pain or reduces visibility are prohibited.
  • Flags consecutively strung together are prohibited.
  • Obscene signs and hate-speech signs are prohibited.
  • Off-premises signs greater than thirty-two (32) square feet are prohibited.
  • Projecting signs less than eighty-four (84) inches (seven (7) feet) in height are prohibited.
  • Portable message signs are prohibited.
  • Double-decking of sign faces so that one is on top of the other is prohibited for outdoor advertising signs.
  • Signs shall not obscure or physically interfere with the view of a government sign, signal or device, nor obstruct or physically interfere with a driver's view of traffic or a road.
  • No illumination or glare shall be emitted directly onto a public street or roadway so as to constitute a hazard or impediment to motorists or public safety.
  • No revolving or rotating beam or beacon of light shall be permitted as part of any sign.
  • Flashing signs and flashing lighting shall not be permitted upon a sign.
  • Tube lights on the outside of windows are not allowed.
  • No exposed reflective or incandescent bulb which exceeds eleven (11) watts shall be used on the exterior surface of any sign so as to expose the face of the bulb, light or lamp to any public street or adjacent property.
  • Temporary yard signs, feather signs, and flags may not be placed in rights-of-way and must be placed at least thirty (30) feet from the centerline of the road.

Exempt Signs in Selma

  • Signs not exposed to view from a street or public access area are not signs for the purpose of these regulations.
  • Government signs: Signs erected, maintained, or otherwise posted, owned, or leased by the State, federal government, county, town, or any other government agency or entity are exempt from these regulations.
  • Fence wraps displaying signage when affixed to perimeter fencing at a construction site are exempt from zoning regulation pertaining to signage under this article until the certificate of occupancy is issued for the final portion of any construction at that site or for twenty-four (24) months from installation, whichever is shorter, provided only advertising for persons directly involved in the construction project (with no monetary compensation for the advertisement) is displayed.

Sign Plan & Submission Notes for Selma

  • A sign plan showing the location, size, height, style and method of illumination (if any) must be submitted as part of the zoning permit application for any sign to be constructed, erected, placed, or replaced.
  • Where multiple building-mounted signs of the same type (including wall, ground and awning signs) are proposed for display on a building or group of buildings situated upon the same property or within a common development, a common signage plan must be submitted detailing a uniform approach to the permitted sign material(s), type of illumination, and style of signage. All signs installed within the area covered by the plan must conform to it, and modifications require all affected signage to meet the new standard.
  • Whenever a sign permit is requested for a property that includes more than one business, the owner or applicant shall identify the total amount of signage in use per business.

Source: municode municipal code