Questions? Call us at (262) 218-2915

Sign Regulations in Surf, North Carolina

Surf, North Carolina has specific sign regulations covering 26 sign types across 3 zoning districts. Regulated sign types include Wall Sign, Monument Sign, Pole Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Surf, North Carolina

Sample Sign Requirements in Surf

Sign TypeMax HeightMax AreaSetback
Wall SignRoof line or parapetNot listedNot listed
Monument Sign8 ft, including structural supports and/or decorative features32 sq ft total, or 16 sq ft per signNot listed
Pole Sign8 ftNot listed5 feet

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for SurfFull Coverage

Sign Types Covered

26

  • Wall Sign
  • Monument Sign
  • Pole Sign
  • Bulletin Board
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Surf, North Carolina Sign Rules at a Glance

Surf, North Carolina regulates 26 sign types across 3 zoning districts. Political Signs are capped at 42 in above pavement and 6 sq ft, set back at least 3 ft from edge of pavement (Sec. 8.5.H). Most commercial signs in Surf require a permit.

Detailed Sign Ordinance Requirements for Surf, North Carolina

Sign Rules by Zoning District in Surf (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
CON, RA, R-15, R-10, R-5, SF, MHS, MFC, R-5M, PD-CZ48 ft, including structural supports and/or decorative features32 sq ft total, or 16 sq ft per sign
NB, O&I, MU, C-1, C-3, G-1, I1220 ft; 8 ft clearance96 sq ft total area of entire sign
General Regulations For All Zones1442 in above pavement32 sq ft

Zone-by-Zone Sign Requirements in Surf

CON, RA, R-15, R-10, R-5, SF, MHS, MFC, R-5M, PD-CZ

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignRoof line or parapetNot listedNot listed1 per useAffixed directly to building wall. Not to extend above roofline or parapet.UnlockSection 8.8, Table - Residential Districts - Wall Sign
Monument Sign8 ft, including structural supports and/or decorative features32 sq ft total, or 16 sq ft per signNot listed1 per entranceAt residential development entrancesUnlockSection 8.8, Table - Residential Districts - Ground/Monument Sign
Pole Sign8 ftNot listed5 feet1 per useOn-premisesUnlockSection 8.8, Table - Residential Districts - Pole Sign
Bulletin BoardNot listed32 sq ft maxMinimum 5 ft from property line1 per institutionOn-premises for churches, schools, community centers, public institutionsUnlockSection 8.5 F, Section 8.8, Table - Bulletin Boards

NB, O&I, MU, C-1, C-3, G-1, I

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignRoof line or parapetNot listedNot listed1 per building wall or tenant, whichever is applicableAffixed directly to any building wallUnlockSection 8.8, Table - Non-Residential Districts - Wall Sign, Section 8.7.A
Projecting SignNot listed12 sq ft3 feet from property line1 per tenantPerpendicular to building; exterior building wall; min 15 ft apart unless on separate storiesUnlockSection 8.8, Table - Non-Residential Districts - Projecting Sign
Monument Sign8 ftNot listed10 ft1 per road frontageFree-standing, on-premises, at road frontageUnlockSection 8.8, Table - Non-Residential Districts - Monument Sign
Pole Sign20 ft; 8 ft clearanceNot listed10 ft1 per road frontageFree-standing, on-premises, at road frontageUnlockSection 8.8, Table - Non-Residential Districts - Pole Sign
Multi-Tenant SignGround: 10 ft; Pole: 20 ft (8 ft clearance)96 sq ft total area of entire sign10 ft1 per road frontageShopping centers/complexes with two or more tenants; on road frontageUnlockSection 8.8, Table - Non-Residential Districts - Multi-Tenant Sign
Sidewalk Sign (Sandwich Board)4 ft8 sq ft3 ft from curb line/sidewalk/property line; maintain 5 ft sidewalk clearance1 per businessOn site where business is advertised; must be 3 ft from curb/sidewalk/property line; min 5 ft sidewalk clearanceUnlockSection 8.8, Table - Non-Residential Districts - Sidewalk Sign
Electronic Changeable Copy Sign (G-1 only)8 ft32 sq ft or 50% of sign face, whichever greater, for changeable copy portion; total sign regulated as monument sign5 ft from all property lines1 per development or businessG-1 zone only; monument sign only; 5 ft from all property linesUnlockSection 8.10.A; Section 8.8 Table (Electronic Changeable Copy Sign)
Bulletin BoardNot listed32 sq ft maxMinimum 5 ft from property line1 per institutionOn-premises for churches, schools, community centers, public institutionsUnlockSection 8.5 F, Section 8.8, Table - Bulletin Boards

General Regulations For All Zones

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Residential Identification SignNot listed16 sq ftNot listed1 per propertyOn-premisesUnlockSection 8.5.C
Professional/Home Occupation SignNot listed4 sq ft5 ft1 per lotOn-site; wall-mounted; at least 5 ft from property line or pedestrian infrastructureUnlockSection 8.5.D
Political Sign42 in above pavement6 sq ftAt least 3 ft from edge of pavementNot listedOn private property with owner's permission; not in ROW of controlled-access highwayUnlockSection 8.5.H
Temporary Real Estate Sign (Residential)Not listed10 sq ftBehind street right-of-way lineOne per street frontage (residential)On property being advertised (not in ROW); one per street frontage, 75 ft apart if twoUnlockSection 8.9.A.2
Temporary Real Estate Sign (Nonresidential)Not listed32 sq ftBehind street right-of-way lineOne per street frontage (nonresidential)On property being advertised (not in ROW); one per street frontage, 75 ft apart if twoUnlockSection 8.9.A.2
Temporary Banner/Flag (Commercial, Special Event, Grand Opening)Not listed32 sq ftNot listed2 freestanding flags per lot/shopping center; banners on principal structureAttached to principal structure except two freestanding flags per lot/shopping centerUnlockSection 8.9.A.3
Estuarine/Oceanside/Pier/Dock Sign (Residential For Sale)Not listed6 sq ft (oceanfront)/10 sq ft (soundfront)Not listed1 per lot (or frontage)Affixed to permanent structure (house, pier, crossover, etc.) seen from waterUnlockSection 8.10.B.1.a
Estuarine/Oceanside/Pier/Dock Sign - Commercial (Charter/Boat)Not listed16 sq ftNot listed1 per boat, dock, or lotGangway, dock, or at boatUnlockSection 8.10.B.1.c/d/e

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Surf with a free PermitPal account.

Run a free code check

Prohibited Signs in Surf

  • No portable signs are permitted, except for sandwich boards.
  • No off-site signs are permitted, with the exception of wayfinding signage installed by a government entity.
  • No flashing, rotating, twirling, or scrolling signs are permitted, except for a barber pole.
  • No inflatable signs, air dancers, or other moving signs are permitted.
  • Roof signs are prohibited.
  • No shapes or decorations, including building façade modifications, intended for advertisement purposes as determined by the Administrator.
  • No combination of permitted signs may exceed the total permitted sign area.
  • No signs may be placed on or over any public right-of-way, except for directional and informational signs erected and maintained by public agencies and/or governmental bodies.
  • No single sign may exceed sixty-four (64) square feet, except as allowed for multi-tenant signs as specified.
  • Signs must not obstruct the sight distance at intersections or along a public or private right-of-way.
  • Signs must not obstruct the view of traffic safety devices or be confused with emergency vehicle flashing lights.
  • Signs must be installed so as not to obstruct any clear line of sight for traffic, fire escape, fire hydrant, passage of emergency vehicles, or any window or door used for egress.
  • No sign may be attached to a fire escape or interfere with any opening required for legal ventilation.
  • No flashing or intermittent illumination is permitted on any advertising sign or structure.
  • All signs must comply with the North Carolina Building Code, the National Electric Code, and local ordinances.
  • Signs must not be attached to or painted on trees, strung between posts, utility poles, traffic signs, or other objects not intended to support a sign.
  • No person may stick, paint, brand, stamp, write or put any sign, poster, or advertisement on any house, fence, wall, or pavement without written permission from the property owner.
  • No sign shall be attached to or above roof structures unless specifically permitted.
  • No temporary sign banners or flags may be installed without meeting time and placement restrictions as set by the ordinance.

Exempt Signs in Surf

  • Directional and informational signs erected and maintained by public agencies and governmental bodies.
  • Flags and insignia of government (American or North Carolina flags).
  • Residential identification signs not exceeding sixteen (16) square feet, bearing only the property owner's name, name of hometown, cottage name, etc.
  • One wall-mounted professional and/or home occupation sign per residential lot not to exceed four (4) square feet, setback a minimum of five (5) feet from the property line or pedestrian infrastructure.
  • On-premise directional signs not to exceed two (2) square feet and bearing no advertising matter.
  • One bulletin board sign per church, school, community center, or public institution, not exceeding thirty-two (32) square feet, either wall-mounted or freestanding, and meeting location and illumination standards.
  • Construction signs during construction, repair, or alteration of a structure, not exceeding thirty-two (32) square feet, and removed when the building is approved for occupancy.
  • Political signs advocating for political action, provided they are under six (6) square feet, follow setback and locational rules, and meet time and placement restrictions.
  • Residential 'for sale' signs on the oceanfront not exceeding six (6) square feet and sound front not exceeding ten (10) square feet, if affixed to a permanent structure.
  • Residential signs up to six (6) square feet denoting private property or private piers.
  • Maintenance activities including cleaning, electrical repair, resurfacing, and other routine maintenance of a sign.
  • Changing tenant name panels on multiple-tenant development signage and change of copy on signs designed for changeable copy.

Sign Plan & Submission Notes for Surf

  • A Comprehensive Signage Plan is required as part of any site plan, master plan, or preliminary plat application. The plan must indicate the size, location, and consistent design of signs for a common development (see Section 3).
  • A sign permit is required for all signs except as expressly exempted or excluded by the ordinance.
  • A common signage plan is required for multi-tenant signs as specified in Section 8.8.
  • A common signage plan is not required for temporary sign permit applications.
  • A sign permit, and building permit if necessary, must be secured before a sign is erected, located, or altered, unless otherwise exempted.

Frequently Asked Questions

In Surf, the height limit for Pole Sign in the NB, O&I, MU, C-1, C-3, G-1, I zoning districts is 20 ft; 8 ft clearance. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Surf require a permit. From the submission notes on this page: A Comprehensive Signage Plan is required as part of any site plan, master plan, or preliminary plat application. The plan must indicate the size, location, and consistent design of signs for a common development (see Section 3). Run a code check for an exact address to see the permit requirements for that zone.

Surf's sign code covers 26 sign types, including Wall Sign, Monument Sign, Pole Sign, and Bulletin Board. Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Flags and insignia of government (American or North Carolina flags). The full list is on this page.

In Surf, Pole Sign in the CON, RA, R-15, R-10, R-5, SF, MHS, MFC, R-5M, PD-CZ zoning districts must be set back 5 feet. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Surf's sign ordinance that cover digital, changing, or flashing signs: No flashing, rotating, twirling, or scrolling signs are permitted, except for a barber pole. Signs must not obstruct the view of traffic safety devices or be confused with emergency vehicle flashing lights. No flashing or intermittent illumination is permitted on any advertising sign or structure. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Surf Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Surf, North Carolina, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds