Questions? Call us at (262) 218-2915

Sign Regulations in Weaverville, North Carolina

Weaverville, North Carolina has specific sign regulations covering 21 sign types across 6 zoning districts. Regulated sign types include Flag, Wireless Telecommunication Facility - Microcell, Wireless Telecommunication Facility - Concealed. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 9, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Weaverville, North Carolina

Sample Sign Requirements in Weaverville

Sign TypeMax HeightMax AreaSetback
No Trespassing / No Parking SignNot listed4 sq ft per signNot listed
Temporary SignNot listed6 sq ft aggregate per lotNot listed
Nameplate Sign (Commercial Messaging for Nonconforming Use)Not listed8 sq ft per side; 16 sq ft aggregateNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for WeavervilleFull Coverage

Sign Types Covered

21

  • Flag
  • Wireless Telecommunication Facility - Microcell
  • Wireless Telecommunication Facility - Concealed
  • Wireless Telecommunication Facility - Collocated
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Weaverville

City WebsiteMunicipal Code5 permit application links available

Frequently Asked Questions

In Weaverville, the height limit for Freestanding Identification Sign (Shared Courtyard/Access Area) in the R-12, C-1, C-2, I-1 zoning districts is 20 ft from top of grade (Sec. 20-4105(h)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Weaverville require a permit. From the submission notes on this page: Specific application/procedures are required for wireless telecommunication facilities, including permits, site development plan and preliminary tower design plan, and possibly a variance meeting with the Board of Adjustment for variances (Sec. 20-4207(e)(10)). Run a code check for an exact address to see the permit requirements for that zone.

Weaverville's sign code covers 21 sign types, including Flag, Wireless Telecommunication Facility - Microcell, Wireless Telecommunication Facility - Concealed, and Wireless Telecommunication Facility - Collocated. Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Signs displayed on the interior of structures (see Sec. 20-4218) are not regulated. The full list is on this page.

In Weaverville, Detached Ground-level Sign in the R-12, C-1, C-2, I-1 zoning districts must be set back at least 10 feet from any street pavement (Sec. 20-4105(e)). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Weaverville's sign ordinance that cover digital, changing, or flashing signs: Any flashing device or sign displaying flashing or intermittent lights, or lights of changing degrees of intensity, except a sign indicating time and/or temperature, with changes alternating more frequently than five seconds. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Weaverville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Weaverville, North Carolina, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Weaverville, North Carolina Sign Rules at a Glance

Weaverville, North Carolina regulates 21 sign types across 6 zoning districts. Flags in the R-1, R-2, R-3 zoning districts are capped at 24 sq ft (Sec. 20-4104(c)). Most commercial signs in Weaverville require a permit.

Detailed Sign Ordinance Requirements for Weaverville, North Carolina

Sign Rules by Zoning District in Weaverville (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones6Not listed6 sq ft aggregate per lotNot listed
R-1, R-2, R-3324 ft or no higher than the highest point of principal building roof, whichever is less50 sq ft per side; 100 sq ft aggregateNot listed
R-12, C-1, C-2, I-1954 ft or height of building roof, whichever is lower96 sq ftNot listed
C-1, C-2, I-1, Town of Weaverville owned property located in R-1, R-2 and R-33Antennas up to 10 ft above supporting structure (poles, towers, or building parapet)As per underlying approval (microcell/concealed) for original structure; equipment enclosure max 12 ft high; combiner-only enclosure may exceed otherwise permitted size.Not listed
C-2, I-1, Town of Weaverville owned property located in R-1, R-2 and R-31Up to 150 ft (C-2 & I-1); Up to 100 ft (other listed districts/uses)Equipment enclosure ≤ 12 ft highNot listed
Town of Weaverville owned property located in R-1, R-2 and R-34Up to 100 ft (on Town property in these zones)As per underlying approval on original structure (see microcell/concealed); equipment enclosures ≤12 ft high unless for combiner only.Not listed

Zone-by-Zone Sign Requirements in Weaverville(sample of 3 of 6 zones)

R-1, R-2, R-3

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Nameplate Sign (Commercial Messaging for Nonconforming Use)Not listed8 sq ft per side; 16 sq ft aggregateNot listedNot listed1 per nonconforming useOn property with legally operating nonconforming useNot listedUnlockSec. 20-4104(a)
Freestanding Sign (Residential Development Entrance)6 ft50 sq ft per side; 100 sq ft aggregateNot listedNot listed1 per entranceAt entrance to residential development approved under special use permit, conditional district, major subdivision, or for legally operating nonconforming residential usesNot listedUnlockSec. 20-4104(b)
Flag24 ft or no higher than the highest point of principal building roof, whichever is less24 sq ftNot listedFlagpoles inside setbacksUp to 3 flags per flagpole per lotInside zoning district setbacks; on lotNot listedUnlockSec. 20-4104(c)

R-12, C-1, C-2, I-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listedUp to 50% of applicable wall areaNot listedNot listedNot listedOn buildings (see R-12 note above)Not listedUnlockSec. 20-4105(a)
Projecting or Suspended SignNot listed8 sq ft per side; 16 sq ft aggregateNot listedNot listed1 per business per building front1 per business per building frontNot listedUnlockSec. 20-4105(b)
Changeable Copy SignNot listed50 sq ft per side; 100 sq ft aggregateNot listedNot listed1 per store front1 per store frontNot listedUnlockSec. 20-4105(d)
Detached Ground-level Sign6 ft50 sq ft per side; 100 sq ft aggregateNot listedNo closer than 10 feet to any street pavement; never in street right-of-way.1 per commercial siteOn-premise for advertised commercial establishmentNot listedUnlockSec. 20-4105(e)
Freestanding Pole SignNot listedNot listedNot listedNo closer than 10 feet to street pavement; not in ROWNot listedOn premises of advertised commercial establishmentNot listedUnlockSec. 20-4105(f)
Private Directional Sign6 ft4 sq ft per side; 8 sq ft aggregate (all sides)Not listedNot listedNot listedOn-premiseNot listedUnlockSec. 20-4105(g)
Freestanding Identification Sign (Shared Courtyard/Access Area)20 ft from top of grade75 sq ft per side; 150 sq ft aggregate (identification sign portion); attached nameplate signs also allowed up to total 150 sq ft per side/300 sq ft both sidesNot listedNot listed1 freestanding identification sign for development + 1 nameplate sign per businessWhere two or more businesses share common court, alley or access area. (Not permitted in R-12).Not listedUnlockSec. 20-4105(h)
Flag54 ft or height of building roof, whichever is lower96 sq ftNot listedFlagpoles inside setbacksUp to 3 flags per flagpole per lotInside zoning district setbacks; on lotNot listedUnlockSec. 20-4105(j)

Town of Weaverville owned property located in R-1, R-2 and R-3

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wireless Telecommunication Facility - MicrocellNot listedEach antenna enclosure ≤ 6 cubic ft; equipment ≤ 28 cubic ft (see Sec. 20-4209 for details)Not listedNot listedNot listedOn buildings and existing structures, or electric distribution poles (with R-3 limits), excluding off-premise signs; mounting/camouflage requirements apply.Not listedUnlockSec. 20-4209(a)-(n)
Wireless Telecommunication Facility - ConcealedAntennas up to 10 ft above support structure (pole/tower/building/parapet)Panel antennas ≤ 8 ft height; equipment enclosures ≤ 60 cubic ft (on poles)Not listedNot listedNot listedBuildings, alternative structures, electric transmission/distribution/lighting/traffic poles (with stated restrictions), concealment and screening per Sec. 20-4210Not listedUnlockSec. 20-4210(a)-(o)
Wireless Telecommunication Facility - CollocatedAs limited by host structure approval (see microcell/concealed)As per underlying approval on original structure (see microcell/concealed); equipment enclosures ≤12 ft high unless for combiner only.Not listedNot listedNot listedAny allowed structure hosting an approved facility of eligible type (see Sec. 20-4211).Not listedUnlockSec. 20-4211(a)-(k)
Wireless Telecommunication Facility - MonopoleUp to 100 ft (on Town property in these zones)Equipment enclosure ≤12 ft highNot listedFall zone = 0.5 x height unless otherwise certifiedNot listedProperty where required fall zone can be provided; monopole only (not lattice); must demonstrate no other facility type provides service.Not listedUnlockSec. 20-4212(a)-(i)

PermitPal covers all 6 zoning districts in Weaverville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Weaverville

  • Any sign located in a manner or place so as to constitute a hazard to traffic as determined by the planning director or a law enforcement officer.
  • Any sign (except a governmental sign) located within a street right-of-way, or projecting into a street right-of-way.
  • Any sign which obstructs or substantially interferes with any window, door, fire escape, stairway, ladder, or opening intended to provide light, air, ingress or egress for any building.
  • Any sign which violates any provision of North Carolina law relative to outdoor advertising.
  • Roof signs (except signs painted or affixed to awnings, canopies, facades, parapets or soffits).
  • Any flashing device or sign displaying flashing or intermittent lights, or lights of changing degrees of intensity, except a sign indicating time and/or temperature, with changes alternating more frequently than five seconds.
  • Any sign painted on a roadway (except governmental signs), tree, rock, or other natural feature.
  • Any sign posted to utility poles or upon other signs.
  • Any sign which is a copy of or an imitation of an official governmental sign, or which purports to have official status.
  • Portable or moveable signs such as rented or leased signs, not permanently affixed to the ground or to a building.
  • Business or product identification signs associated with home occupations.
  • Signs not expressly permitted as being allowed by right or otherwise expressly allowed by town council or the board of adjustment consistent with the provisions of this chapter.
  • Obsolete or abandoned signs are prohibited and shall be removed by the owner or agent of the owner within 30 days after the termination or the business or event so advertised or pertained to.

Exempt Signs in Weaverville

  • Signs erected or installed by a governmental agency under governmental authority to identify public buildings, welcome or direct visitors, or to regulate, control or direct traffic, including signs indicating bus stops and similar transportation facilities.
  • Signs erected, maintained or otherwise posted, owned or leased by the local, state, or federal governments.
  • Legal notices, warnings, regulatory informational signs erected, or required, by a public agency to ensure the public health, safety, or general welfare.
  • Signs required by law, including, but not limited to, building permits, exit signs, etc.
  • Signs which warn of hazard to life, limb, and property, such as high voltage electrical equipment, explosives, etc.
  • "No Trespassing" and "No Parking" signs equal to or containing less than four square feet of surface area and located on private property.
  • Signs which are located inside a particular establishment and which are not intended for external viewing.
  • Temporary signs with an aggregate sign face area not to exceed six square feet. (Note: Off premises commercial signs are not considered temporary signs under this section.)
  • Political signs that comply with G.S. 136-32(b)-(e) within all rights-of-way for North Carolina's highway system and town streets.
  • Fence wraps displaying signage when affixed to perimeter fencing at a construction site, until certificate of occupancy is issued for the final portion of any construction at that site or 24 months from installation (whichever is shorter), provided advertising is not paid and is related only to parties directly involved in the construction project.
  • Signs displayed on the interior of structures (see Sec. 20-4218) are not regulated.
  • Routine maintenance, replacement with the same size/smaller small wireless facilities, and installation/placement/maintenance/replacement of micro wireless facilities suspended on cables between existing utility poles/town utility poles by authorized communications providers do not require application, permit, or fees.

Sign Plan & Submission Notes for Weaverville

  • A sign permit is required for all signs placed or erected within the town, unless otherwise authorized by the ordinance (Sec. 20-4108(a)).
  • Sign permit must be issued by the planning director or their designee prior to installation.
  • Specific application/procedures are required for wireless telecommunication facilities, including permits, site development plan and preliminary tower design plan, and possibly a variance meeting with the Board of Adjustment for variances (Sec. 20-4207(e)(10)).
  • A Buncombe County building permit may be required in addition to the requisite town sign permit (Sec. 20-4105(i)).
  • A master sign plan or similar is not specifically referenced for general signage, but all signs not expressly allowed require some form of town permission or council/board approval.
  • Applicants for new wireless facilities are required to evaluate feasibility of collocation and provide information to determine whether collocation is reasonably feasible; if not feasible, a new support structure application is permitted (Sec. 20-4213(b)(3)).
  • Application processes are in place for certain sign types and wireless facilities, sometimes requiring documentation, surveys, plans, proof of FCC/FAA compliance, bonds or guarantees, and insurance.

Source: municode municipal code