Sign Regulations in Bellevue, Ohio
Bellevue, Ohio has specific sign regulations covering 10 sign types across 7 zoning districts. Regulated sign types include Free-standing Sign, Projecting Sign, Attached Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 11, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Bellevue, Ohio
Sample Sign Requirements in Bellevue
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Free-standing Sign | Not listed | 35 square feet | Minimum of 2 feet from the right-of-way or 6 feet from the back edge of the sidewalk |
| Attached Sign | Not listed | 100 square feet per entrance | Not listed |
| Projecting Sign | Not listed | 12 square feet | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
10
- Free-standing Sign
- Projecting Sign
- Attached Sign
- Off-premises Sign
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Bellevue
Other Cities in Ohio
Frequently Asked Questions
In Bellevue, the height limit for Free-standing Sign in the I-1, I-2 zoning districts is 25 feet (Sec. 1223.11(a)(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Bellevue require a permit. From the submission notes on this page: No sign shall be erected, moved or altered without first obtaining approval either with an individual Sign Permit or as part of another application within which the sign is only one portion of the project. Run a code check for an exact address to see the permit requirements for that zone.
Bellevue's sign code covers 10 sign types, including Free-standing Sign, Projecting Sign, Attached Sign, and Off-premises Sign. Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Window Signs, whether business or advertising, are exempt from obtaining a Zoning Permit; however, All Window Signs located in the B-1 District must be approved by the Downtown Architectural Standards Board prior to being placed in the window. The full list is on this page.
In Bellevue, Free-standing Sign in the I-1, I-2 zoning districts must be set back at least 2 feet from the right-of-way (Sec. 1223.11(a)(1)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Bellevue's sign ordinance that cover digital, changing, or flashing signs: Signs and/or Advertising Signs that incorporate flashing or moving lights, except message center signs and time/temperature signs and small, stock 'open' signs that do not exceed two (2) square feet in size, and are lit only when the business is open. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Bellevue Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bellevue, Ohio, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Bellevue, Ohio Sign Rules at a Glance
Bellevue, Ohio regulates 10 sign types across 7 zoning districts. Free-standing Signs in the I-1, I-2 zoning districts are capped at 25 feet tall and 100 square feet, set back at least 2 feet from the right-of-way (Sec. 1223.11(a)(1)). Most commercial signs in Bellevue require a permit.
Detailed Sign Ordinance Requirements for Bellevue, Ohio
Sign Rules by Zoning District in Bellevue (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| R-H | 1 | Not listed | 35 square feet | Not listed |
| B-1 | 2 | Not listed | 100 square feet per entrance | Not listed |
| B-2 | 1 | 25 feet | 100 square feet | Not listed |
| I-1, I-2 | 2 | 25 feet | 300 square feet | Not listed |
| B-1 Central Downtown Business District | 2 | Not listed | 12 square feet | Not listed |
| Residential District | 3 | Not listed | 25 square feet | Not listed |
| General Regulations For All Zones | 2 | Not listed | 100 square feet | Not listed |
Zone-by-Zone Sign Requirements in Bellevue(sample of 3 of 7 zones)
B-1
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Attached Sign | Not listed | 100 square feet per entrance | Not listed | Not listed | 1 per entrance | Affixed to the main building at every entrance | Not listed | Unlock | 1223.11(b)(1) |
| Projecting Sign | Not listed | 12 square feet | Not listed | Not listed | 1 per entrance | At each entrance | Not listed | Unlock | 1223.11(b)(1) |
I-1, I-2
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Free-standing Sign | 25 feet | 100 square feet | Not listed | Minimum of 2 feet from the right-of-way | 1 per street frontage | On the same property as the main building | Not listed | Unlock | 1223.11(a)(1) |
| Off-premises Sign | Not listed | 300 square feet | Not listed | Not listed | 1 per lot | No closer than 300 feet from another Off-premises Sign | Not listed | Unlock | 1223.08 |
Residential District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Non-illuminated Sign | Not listed | 6 square feet | Not listed | Not listed | Not listed | Attached to the building | Not listed | Unlock | 1223.13(b) |
| Manufactured-home Park Sign | Not listed | 25 square feet | Not listed | Not listed | 1 per park | Located on the premises | Not listed | Unlock | 1223.13(c) |
| Bed and Breakfast Homestead Sign | Not listed | 3 square feet | Not listed | Not listed | 1 per homestead | Attached to and parallel to the front wall of the building | Not listed | Unlock | 1223.13(d) |
PermitPal covers all 7 zoning districts in Bellevue. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Bellevue
- Signs and/or Advertising Signs that incorporate flashing or moving lights, except message center signs and time/temperature signs and small, stock 'open' signs that do not exceed two (2) square feet in size, and are lit only when the business is open
- Signs and/or Advertising Signs attached to any utility pole, tree, hedge, railing or fence
- Signs and/or Advertising Signs that are unsafe or constitute a traffic hazard, as determined by the Zoning Administrator
- Projecting Signs that extend to or into the public right-of-way, except as permitted within the B-1 Central Business District
- Temporary or Portable Signs and/or Temporary or Portable Advertising Signs that are provided with electrical power
- Portable signs that are to be used as free-standing or attached business signs are prohibited
- Portable advertising signs that exceed twelve (12) square feet
- Portable signs and/or Advertising Signs located in the right-of-way except in Central Business District with Zero Building Setback
- Abandoned Signs and/or Abandoned Advertising Signs
- Signs that exceed thirty-five feet (35') height
- Roof Signs, Business or Advertising
- Signs and/or Advertising Signs located in a public right-of-way
- A pennant, banner, streamer or similar type device, unless they are announcing temporary charitable or community functions
- Search lights and beacons
- All signs and/or Advertising Signs of an unprofessional or inappropriate nature as determined by the Zoning Administrator or Designee
Exempt Signs in Bellevue
- Any sign erected and maintained for any governmental function or regulation or for public utility
- Non-illuminated nameplates, including historical name or number plates, and residential nameplates, not greater than two (2) square feet, mounted on a residence or commercial building
- Signs, such as 'Enter' or 'Exit', warning or directing the viewer of action to be taken on private property, if not located in a public right-of-way, and less than nine (9) square feet
- Temporary, non-illuminated signs, not exceeding twelve (12) square feet and not located in a public right-of-way, used to advertise the sale, rental or lease of the property on which they are located; and similar signs used to advertise events sponsored by churches or other non-profit organizations
- One (1) sign for each painter, roofer, or other contractor during the period when the contractor is performing the work and on the lot which the work is being conducted
- Professional Name Plates not exceeding six (6) square feet and mounted on the building
- Temporary Signs associated with garage sales that do not exceed six (6) square feet, are removed after the sale is completed and are not located in the street right-of-way
- Signs associated with a campaign, election or other civic affairs that do not exceed sixteen (16) square feet and are removed within five (5) days after the event and are not located within the public right-of-way
- Non-illuminated signs associated with home occupations, provided they do not exceed six (6) square feet, and are affixed to the structure
- Non-illuminated signs identifying the name and address of a multiple-family dwelling, located in an R-3 Multiple Family District, and provided that such sign does not exceed twenty-four (24) square feet, is located outside of the street right-of-way and, if located on a corner lot, meets corner clearance requirements
- Updating an existing sign, where all of the following apply: The name of the business has not changed; The owner of the business has not changed; and The exterior dimensions of the existing sign remain the same or smaller
- Signs which are part of the construction of a vending machine, fuel pump or similar device
- Days and hours of operation alone, do not constitute a Business Sign
- Window Signs, whether business or advertising, are exempt from obtaining a Zoning Permit; however, All Window Signs located in the B-1 District must be approved by the Downtown Architectural Standards Board prior to being placed in the window
Sign Plan & Submission Notes for Bellevue
- No sign shall be erected, moved or altered without first obtaining approval either with an individual Sign Permit or as part of another application within which the sign is only one portion of the project
- A Revocable Use Permit must be signed by owner for Projecting Signs that extend to or into the public right-of-way, except as permitted within the B-1 Central Business District
- A Zoning Permit for Projecting Signs in a B-1 Central Business District with zero building setback from the right-of-way may be revocable pursuant to state and federal law
- Additional attached signage may be permissible by variance request
Source: amlegal municipal code