Questions? Call us at (262) 218-2915

Sign Regulations in Brookville, Ohio

Brookville, Ohio has specific sign regulations covering 5 sign types across 12 zoning districts. Regulated sign types include Window Sign, Ground Sign, Building Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 11, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Brookville, Ohio

Sample Sign Requirements in Brookville

Sign TypeMax HeightMax AreaSetback
Ground Sign10 ft.32 sq. ft.10 ft. from right of way, 20 ft. from side or rear lot line
Building SignNot listed50 sq. ft.Not listed
Window SignNot listed25 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BrookvilleFull Coverage

Sign Types Covered

5

  • Window Sign
  • Ground Sign
  • Building Sign
  • Electronic Message Center
  • +1 more types

Zoning Districts

12

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Brookville

Frequently Asked Questions

In Brookville, the height limit for Ground Sign in the Business Districts is 15 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Brookville require a permit. We haven't published Brookville's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.

Brookville's sign code covers 5 sign types, including Window Sign, Ground Sign, Building Sign, and Electronic Message Center. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Hand-held signs not set on or affixed to the ground. The full list is on this page.

In Brookville, Ground Sign in the Office Districts must be set back 10 ft from right of way, 20 ft from side or rear lot line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Brookville's sign ordinance that cover digital, changing, or flashing signs: No sign or other advertising structure shall have any lights or illumination that flash, move, rotate, scintillate, blink, flicker, or cause the illusion of movement, vary in intensity or color, or use intermittent electrical pulses. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Brookville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Brookville, Ohio, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Brookville, Ohio Sign Rules at a Glance

Brookville, Ohio regulates 5 sign types across 12 zoning districts. Ground Signs in the Office Districts are capped at 10 ft tall and 32 sq ft, set back 10 ft from right of way, 20 ft from side or rear lot line. Most commercial signs in Brookville require a permit.

Detailed Sign Ordinance Requirements for Brookville, Ohio

Sign Rules by Zoning District in Brookville (12 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Office Districts310 ft.50 sq. ft.Not listed
Business Districts315 ft.50 sq. ft.Not listed
Industrial Districts315 ft.75 sq. ft.Not listed
Residential Districts24 ft. for Ground Signs12 sq. ft. total for all Ground SignsNot listed
Civic Special Uses in C and R Districts37 ft.50 sq. ft.Not listed
Residential Special Uses in R Districts37 ft.50 sq. ft.Not listed
CC District2Not listed50 sq. ft.Not listed
OR-OS District310 ft.50 sq. ft.Not listed
GB-CB-PC Districts315 ft.50 sq. ft.Not listed
I-1, I-2-PI Districts315 ft.75 sq. ft.Not listed
HS District320 ft.75 sq. ft.Not listed
General Regulations For All Zones26 ft. for Ground Signs75% of sign faceNot listed

Zone-by-Zone Sign Requirements in Brookville(sample of 3 of 12 zones)

Office Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign10 ft.32 sq. ft.Not listed10 ft. from right of way, 20 ft. from side or rear lot line1 per street frontage1 per street frontageNot listedUnlockTable 61.2 Ground Sign Requirements
Building SignNot listed50 sq. ft.Not listedNot listed1 per street frontage1 per street frontageNot listedUnlockTable 61.3 Building Sign Requirements
Window SignNot listed25 sq. ft.Not listedNot listedNot listedFirst floor onlyNot listedUnlock1161.04.5 Window Signs

Business Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign15 ft.50 sq. ft.Not listed10 ft. from right of way, 20 ft. from side or rear lot line1 per street frontage1 per street frontageNot listedUnlockTable 61.2 Ground Sign Requirements
Building SignNot listed50 sq. ft.Not listedNot listed1 per street frontage1 per street frontageNot listedUnlockTable 61.3 Building Sign Requirements
Window SignNot listed25 sq. ft.Not listedNot listedNot listedFirst floor onlyNot listedUnlock1161.04.5 Window Signs

Industrial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign15 ft.50 sq. ft.Not listed10 ft. from right of way, 20 ft. from side or rear lot line1 per street frontage1 per street frontageNot listedUnlockTable 61.2 Ground Sign Requirements
Building SignNot listed75 sq. ft.Not listedNot listed1 per street frontage1 per street frontageNot listedUnlockTable 61.3 Building Sign Requirements
Window SignNot listed25 sq. ft.Not listedNot listedNot listedFirst floor onlyNot listedUnlock1161.04.5 Window Signs

PermitPal covers all 12 zoning districts in Brookville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Brookville

  • No sign or other advertising structure shall be erected, relocated, or maintained so as to prevent free ingress or egress from any door, window, or fire escape, or block any light or ventilation openings.
  • No sign of any kind shall be located or attached so as to obstruct emergency facilities or equipment.
  • No sign shall be permitted or allowed in any public right of way, except as may be erected by municipal or state government.
  • No sign or other advertising structure shall constitute a hazard to safety or health by reason of inadequate or inappropriate design, construction, repair, or maintenance.
  • No signs shall be located nearer than 8 feet vertically, or 4 feet horizontally from any overhead electric wires or conductors or public utility guy wires.
  • No sign shall be mounted on the roof of a building or which is mounted to and wholly dependent upon a building for support and that projects above the parapet of a building with a flat roof, the eave line of a building with a gambrel, gable, or hip roof or the deck line of a building with a mansard roof.
  • No sign shall project above a parapet wall.
  • No sign shall be placed or project above the angle of a mansard roof.
  • Other than traffic control signs, no sign shall be attached to or supported by a tree, bus shelter, utility pole, bench, trash receptacle, or newspaper vending machine.
  • No sign or other advertising structure shall be illuminated or emit light so as to cause objectionable brightness or glare into or onto any residential premises or any public right-of-way.
  • No sign or other advertising structure shall have visible moving, revolving, or rotating parts, or visible mechanical movement of any kind.
  • No sign or other advertising structure shall have any lights or illumination that flash, move, rotate, scintillate, blink, flicker, or cause the illusion of movement, vary in intensity or color, or use intermittent electrical pulses.
  • No sign shall contain or consist of windblown devices, such as banners, pennants, ribbons, streamers, balloons and other inflatable devices, air activated graphics, spinners or similar objects, or flags except as permitted.
  • Pole signs shall not be permitted in any zoning district.

Exempt Signs in Brookville

  • Signs that are an integral part of the original construction of vending or similar machines, fuel pumps, or similar devices.
  • Signs that are constructed of paper, cloth, or similar expendable material, attached to the inside of a window, do not exceed 8 square feet in sign face area, and do not cover more than 25% of the area of the window pane.
  • Signs that are an integral part of the historic character of a structure that have been designated an official landmark or historic structure by any agency or body of the governments of the United States, State of Ohio, Montgomery County, or City of Brookville.
  • Hand-held signs not set on or affixed to the ground.
  • Temporary signs located within residential districts as listed within Table 61.4 T.

Sign Plan & Submission Notes for Brookville

  • All multiple tenant properties shall develop a sign policy subject to approval of the Zoning Administrator.

Source: amlegal municipal code