Questions? Call us at (262) 218-2915

Sign Regulations in Olmsted Falls, Ohio

Olmsted Falls, Ohio has specific sign regulations covering 11 sign types across 6 zoning districts. Regulated sign types include Integral Sign or Monument, Political Sign, Real Estate Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 11, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Olmsted Falls, Ohio

Sample Sign Requirements in Olmsted Falls

Sign TypeMax HeightMax AreaSetback
Integral Sign or MonumentNot listed2 square feetNot listed
Political Sign4 feet5 square feet per side5 feet from any lot line
Real Estate Sign4 feet for single-family, 5 feet for non-residential4 square feet for single-family, 8 square feet for non-residentialNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Olmsted FallsFull Coverage

Sign Types Covered

11

  • Integral Sign or Monument
  • Political Sign
  • Real Estate Sign
  • Garage Sale Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Olmsted Falls

Frequently Asked Questions

In Olmsted Falls, the height limit for Free-standing Sign in the C-1, C-2 and C-3 Commercial Districts is 4 feet for ground sign, 8 feet for pylon sign (Sec. 1272.04(d)(3)B). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Olmsted Falls require a permit. From the submission notes on this page: Permanent development and building identification signs require approval by the Planning Commission and the Architectural Board of Review by the time of the approval of the final plat or development plan. Run a code check for an exact address to see the permit requirements for that zone.

Olmsted Falls's sign code covers 11 sign types, including Integral Sign or Monument, Political Sign, Real Estate Sign, and Garage Sale Sign. Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Security signs. The full list is on this page.

In Olmsted Falls, Free-standing Sign in the C-1, C-2 and C-3 Commercial Districts must be set back 5 feet from lot line or access drive (Sec. 1272.04(d)(3)B). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Olmsted Falls's sign ordinance that cover digital, changing, or flashing signs: Animated signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Olmsted Falls Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Olmsted Falls, Ohio, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Olmsted Falls, Ohio Sign Rules at a Glance

Olmsted Falls, Ohio regulates 11 sign types across 6 zoning districts. Political Signs are capped at 4 feet tall and 5 square feet per side, set back 5 feet from any lot line (Sec. 1272.03(d)(1)). Most commercial signs in Olmsted Falls require a permit.

Detailed Sign Ordinance Requirements for Olmsted Falls, Ohio

Sign Rules by Zoning District in Olmsted Falls (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones34 feet5 square feet per sideNot listed
D Dwelling Districts34 feet for small projects, 5 feet for large projects16 square feet for large projects, 6 square feet for small projectsNot listed
P-1 and P-2 Professional Districts1Not listedSame as Commercial DistrictsNot listed
C-1, C-2 and C-3 Commercial Districts24 feet for ground sign, 8 feet for pylon sign60 square feetNot listed
I-1 and I-2 Industrial Districts15 feet for ground sign, 10 feet for pylon sign30 square feetNot listed
Historic Area Conservation Districts1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Olmsted Falls(sample of 3 of 6 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Integral Sign or MonumentNot listed2 square feetNot listedNot listedNot listedFlat against or part of a wall or structural featureNot listedUnlock1272.04(a)(1)
Political Sign4 feet5 square feet per sideNot listed5 feet from any lot lineOne per property per political office or issueWindow or yard, 5 feet from lot lineNot listedUnlock1272.03(d)(1)
Real Estate Sign4 feet for single-family, 5 feet for non-residential4 square feet for single-family, 8 square feet for non-residentialNot listedNot listedOne per dwelling or establishmentOn subject propertyNot listedUnlock1272.03(d)(2)

D Dwelling Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Garage Sale SignNot listed4 square feetNot listedNot listedNot listedOn premisesNot listedUnlock1272.04(b)(1)
Nameplate SignNot listed1.5 square feetNot listedNot listedTwo per residenceAttached to a wall or suspended from a postNot listedUnlock1272.03(c)(6)
Development or Construction Sign (Temporary)4 feet for small projects, 5 feet for large projects16 square feet for large projects, 6 square feet for small projectsNot listed5 feet from street right-of-wayOne per projectOn subject propertyNot listedUnlock1272.03(d)(2)C

C-1, C-2 and C-3 Commercial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed60 square feetNot listed3 feet from end of building or party wallOne per businessOn building wallNot listedUnlock1272.04(d)(3)A
Free-standing Sign4 feet for ground sign, 8 feet for pylon sign24 square feet for ground sign, 30 square feet for pylon signNot listed5 feet from lot line or access driveOne per businessOn premisesNot listedUnlock1272.04(d)(3)B

PermitPal covers all 6 zoning districts in Olmsted Falls. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Olmsted Falls

  • Abandoned signs.
  • Animated signs.
  • Banners, pennants, festoons, search lights.
  • Billboards.
  • Changeable copy/bulletin board signs.
  • Mobile or portable signs, except for real estate 'open house' signs, real-estate signs, and temporary signs approved by the Zoning Administrator.
  • Pole signs.
  • Roof signs.
  • Signs imitating or resembling official traffic or government signs or signals.
  • Signs attached to trees, telephone poles, public benches, or streetlights, or signs placed on public property or right-of-way by other than Municipal authorities.
  • Signs painted on sidewalks, curbs, or streets unless placed by the City after approval by the Zoning Administrator.
  • Temporary directional signs, except government signs approved by Council.
  • Temporary signs, except those in the window of a business establishment, those approved by the Zoning Administrator, or those allowed for a public purpose.
  • Vehicle signs, except for signs or lettering on buses, taxis, or other vehicles used during the normal course of business.

Exempt Signs in Olmsted Falls

  • Garage sale signs not greater than four square feet in area placed only on the premises.
  • Holiday or special event decorations.
  • Incidental signs.
  • Integral signs or monuments not exceeding two square feet in area.
  • Interior signs not part of a window display intended to be visible from the street.
  • Nameplate signs for detached single-family dwellings not exceeding one and one-half square feet in area, with no more than two signs per residence.
  • Open and closed signs not exceeding two square feet in area.
  • Political signs meeting specific requirements.
  • Governmental signs or any sign relating to an emergency.
  • Real estate 'for rent' or 'for sale' signs meeting specific requirements.
  • Security signs.
  • Traffic or other necessary governmental signs, such as directional signs, railroad crossing signs, and danger signs, and temporary emergency signs approved by Council.
  • Temporary window signs regulated in Section 1272.04(d)(3)C.2.
  • Signs in the right-of-way specifically authorized by Section 1272.03(d)(9).

Sign Plan & Submission Notes for Olmsted Falls

  • Development signs require permits and approval of their design by the Architectural Board of Review issued in the manner described in Section 1272.07.
  • Permanent development and building identification signs require approval by the Planning Commission and the Architectural Board of Review by the time of the approval of the final plat or development plan.
  • The Architectural Board of Review must approve the design of signs before a permit is issued.

Source: amlegal municipal code