Sign Regulations in Salem Township, Ohio
Salem Township, Ohio has specific sign regulations covering 22 sign types across 3 zoning districts. Regulated sign types include Pole Sign, Wall Sign (General), Wall Sign (Large Building > 4,000 sq ft). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 18, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Salem Township, Ohio
Sample Sign Requirements in Salem Township
| Sign Type | Max Area |
|---|---|
| Wall Sign (General) | 4 sq ft |
| Pole Sign | 4 sq ft |
| Wall Sign (Large Building > 4,000 sq ft) | Calculated by formula; max combined area 32 sq ft |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
22
- Pole Sign
- Wall Sign (General)
- Wall Sign (Large Building > 4,000 sq ft)
- Temporary Sign - Residential (R-1, A)
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Salem Township
Salem Township, Ohio Sign Rules at a Glance
Salem Township, Ohio regulates 22 sign types across 3 zoning districts. Temporary Signs - Non-Residential in the Non-Residential Zoning District are capped at 6 ft tall and 24 sq ft, set back 10 ft from street right-of-way (Sec. 3.611(B)). Most commercial signs in Salem Township require a permit.
Detailed Sign Ordinance Requirements for Salem Township, Ohio
Sign Rules by Zoning District in Salem Township (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area |
|---|---|---|---|
| Residential Zoning District (R-1, R-2, A) | 6 | 10 ft | Calculated by formula; max combined area 32 sq ft |
| Non-Residential Zoning District | 13 | 25 ft (more by site plan) | 150 sq ft |
| General Regulations For All Zones | 4 | 30 in | 6 sq ft |
Zone-by-Zone Sign Requirements in Salem Township
Residential Zoning District (R-1, R-2, A)
| Sign Type | Max Height | Max Area | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|
| Wall Sign (General) | Not listed | 4 sq ft | Not listed | 1 per building | On building wall | Unlock | Sec. 3.614; Sec. 3.602; Sec. 3.611(D) |
| Pole Sign | Not listed | 4 sq ft | Not listed | 1 per building | Freestanding | Unlock | Sec. 3.614 |
| Wall Sign (Large Building > 4,000 sq ft) | Not listed | Calculated by formula; max combined area 32 sq ft | Not listed | 1 per building | On building wall | Unlock | Sec. 3.614 |
| Temporary Sign - Residential (R-1, A) | 4 ft | 7 sq ft | At least 10 ft from street right-of-way | 1 per residence/lot | On lot | Unlock | Sec. 3.611(A) |
| Temporary Sign - Residential (R-2) | 4 ft | 12 sq ft | At least 10 ft from street right-of-way | 1 per residence/lot | On lot | Unlock | Sec. 3.611(A) |
| Gateway Sign (Residential) | 10 ft | 24 sq ft | 10 ft from ROW, 10 ft from driveway, 5 ft from walk/paved path | 1 per side of entrance | Each entry point (2 per entrance, one each side) | Unlock | Sec. 3.612(A) |
Non-Residential Zoning District
| Sign Type | Max Height | Max Area | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|
| Wall Sign (Single User Building) | Not listed | 150 sq ft | Not listed | 1 per exterior building wall | Each exterior building wall; side walls included | Unlock | Sec. 3.613(A), 3.613(B)(1) |
| Ground Sign (< 50,000 sq ft GFA) | 6 ft | 48 sq ft | Not listed | 1 per street frontage or lot | Freestanding, ground-mounted | Unlock | Sec. 3.613(A)(Single user/multi-tenant)/ 3.613(C)(2) |
| Ground Sign (>= 50,000 sq ft GFA) | 12 ft | 96 sq ft | Not listed | 1 per street frontage or lot | Freestanding, ground-mounted | Unlock | Sec. 3.613(C)(2) |
| Pole Sign | 20 ft | 150 sq ft | 10 ft from ROW/adjacent property, clear sight triangle (Sec. 3.103.1) | 1 per street frontage or lot (cannot combine with ground or arch sign) | Freestanding, on poles | Unlock | Sec. 3.613(D) |
| Arch Sign | 25 ft (more by site plan) | 2 ft × width of arch span | 2.5 ft from driveway/lot; 10 ft from ROW | 1 per side of driveway/roadway/entry | At driveway/roadway (entry points) | Unlock | Sec. 3.612(C) |
| Gateway Sign (Non-Residential) | Not listed | See Table 3.613-2 for ground sign max area | 10 ft ROW, 10 ft driveway, 5 ft sidewalk | 1 per side of entrance | Each side of entry point | Unlock | Sec. 3.612(A) |
| Temporary Sign - Non-Residential | 6 ft | 24 sq ft | 10 ft from street ROW | 1 per property | On property | Unlock | Sec. 3.611(B) |
| Portable Sign (A-frame, inverted T, Banner) | Not listed | 12 sq ft | 10 ft from public ROW | 1 per property/business | On property | Unlock | Sec. 3.611(C) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|
| Vehicular Directional Sign | 30 in | 6 sq ft | Max 4 per parcel (1 per access point) | On-site within development | Unlock | Sec. 3.611(F) |
| Pedestrian Directional Sign | Not listed | 4 sq ft per side | Not listed | On-site | Unlock | Sec. 3.611(G) |
| Professional Name Plate | Not listed | 2 sq ft | Not listed | On building/lot | Unlock | Sec. 3.611(D) |
| Comprehensive Sign Program | Not listed | Not listed | Not listed | Not listed | Unlock | Sec. 3.616 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Salem Township with a free PermitPal account.
Run a free code checkProhibited Signs in Salem Township
- No exterior or window signage shall be erected, constructed, enlarged, expanded, structurally altered, relocated, or reconstructed unless a zoning permit and building/electrical permit evidencing compliance have been issued by the Zoning Inspector, unless expressly exempted.
- No sign shall be illuminated by or contain flashing, intermittent, rotating, or moving light or lights.
- In no event shall an illuminated sign be placed or directed so as to be a visual nuisance or traffic hazard.
- No sign shall be placed in such a manner as to obstruct free and clear vision of traffic on public or private property.
- Signs shall not obstruct windows, doors, fire escapes, balconies, stairways, ladders, vents, or other means of building ingress/egress.
- All permanent pennants, banners, streamers, and similar-type devices are prohibited.
- Signs or portions of a sign that cycle, revolve, rotate, whirl, spin, or otherwise make use of motion to attract attention are prohibited.
- Beacons and searchlights are prohibited, except for temporary events and emergency purposes.
- Signs attached to, painted on, or placed on a motor vehicle, trailer, or other licensed or unlicensed vehicle or conveyance, which is located so as to serve exclusively as a permanent, temporary, or portable sign, are prohibited.
- Promotional balloons suspended from, or affixed to, a structure, vehicle, or ground are prohibited.
- Flashing neon signs are prohibited.
- Roof signs are prohibited, except roof signs used for identification purposes on agricultural buildings.
- Window signs that occupy more than fifty percent (50%) of the window surface are prohibited.
- Abandoned signs must be removed.
- No signs shall be attached to or supported by a tree, utility pole, trash receptacle, bench, vending machine, or public shelter or placed in any public right-of-way.
- No sign shall contain words, images, or graphic illustrations of an obscene nature.
- Audio message delivery signage is prohibited.
- Signs that emit any flames, smoke, fumes, vapor, or any similar substance are prohibited.
- Plywood, plastic, and unfinished wood are not permitted as free-standing and ground sign materials.
- No exposed structural members will be permitted unless they contribute to the sign concept.
- Temporary, moveable, or portable signs shall not be illuminated.
Exempt Signs in Salem Township
- Signs erected and maintained pursuant to a government's function, ordinances, or regulation are excluded from regulation.
- Repainting, replacement of parts, and preventative maintenance of a sign do not require a permit (so long as there is no alteration to sign face, lettering, base, or support; no enlargement or new structure; and the sign is accessory to a legally allowed use).
- Temporary signs within residential zoning districts are exempt if: removed within thirty (30) days following event/activity, limited to one per residence or lot, area limits (7 sq ft in R-1 and A; 12 sq ft in R-2; height max 4 ft), and with property owner's permission.
- Temporary signs within non-residential zoning districts are exempt if: area max 24 sq ft, height max 6 ft, removed within 7 days following event, not more than 60 days per calendar year, and with property owner's permission.
- Portable 'A' frame, inverted 'T' signs, banners: one per property or business, area max 12 sq ft, minimum 10 ft from public right-of-way, with property owner's permission.
- Professional name plates not exceeding 2 sq ft in area, identifying the business or occupants of a building or lot, are exempt.
- Window signs not exceeding more than fifty percent (50%) of the window surface are exempt.
- Vehicular directional signs (on-site in multi-family/non-residential): area max 6 sq ft, one per access point (max 4 per parcel), height max 30 in, no logos or advertising copy.
- Pedestrian directional signs, containing no advertising, in multi-family or non-residential developments are exempt if not exceeding 4 sq ft per side and causing no visibility problems.
Sign Plan & Submission Notes for Salem Township
- The review of signs submitted in conjunction with a development requiring site plan shall be in accordance with Section 1.303; this implies a site plan is required as part of the sign review process for such developments.
- A Comprehensive Sign Program (sign plan) is required whenever: (A) multiple tenants or use signs are proposed for a new or existing development; (B) multiple tenant or use signs are proposed for a single structure or separate structures that are physically or functionally related; (C) for a planned shopping center; or (D) when the Zoning Inspector determines it is needed because of special project characteristics.
- The comprehensive sign plan shall be submitted in conjunction with the required preliminary Site Plan for the development.
- The Zoning Inspector may convene the Board of Zoning Appeals to make determinations on signs not specifically listed in the ordinance when he or she believes the sign is not easily categorized.
Source: other municipal code
Other Cities in Ohio
Frequently Asked Questions
In Salem Township, the height limit for Pole Sign in the Non-Residential Zoning District is 20 ft (Sec. 3.613(D)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Salem Township require a permit. From the submission notes on this page: The review of signs submitted in conjunction with a development requiring site plan shall be in accordance with Section 1.303; this implies a site plan is required as part of the sign review process for such developments. Run a code check for an exact address to see the permit requirements for that zone.
Salem Township's sign code covers 22 sign types, including Pole Sign, Wall Sign (General), Wall Sign (Large Building > 4,000 sq ft), and Temporary Sign - Residential (R-1, A). Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Repainting, replacement of parts, and preventative maintenance of a sign do not require a permit (so long as there is no alteration to sign face, lettering, base, or support; no enlargement or new structure; and the sign is accessory to a legally allowed use). The full list is on this page.
In Salem Township, Pole Sign in the Non-Residential Zoning District must be set back 10 ft from right-of-way/adjacent property, clear sight triangle (Sec. 3.613(D)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Salem Township's sign ordinance that cover digital, changing, or flashing signs: No sign shall be illuminated by or contain flashing, intermittent, rotating, or moving light or lights. Flashing neon signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Salem Township Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Salem Township, Ohio, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds