Sign Regulations in Tipp City, Ohio
Tipp City, Ohio has specific sign regulations covering 24 sign types across 7 zoning districts. Regulated sign types include Development/Subdivision Sign (Residential Districts), Ground-Mounted Monument Sign (Agricultural or Nonresidential Use in R District), Wall Sign (Nonresidential Use in Residential District). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 9, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Tipp City, Ohio
Sample Sign Requirements in Tipp City
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Development/Subdivision Sign (Residential Districts) | 6 ft | 32 sq ft (R districts, CD); 50 sq ft (nonresidential use with lot area 5 acres or more in R-1A, R-1B, R-1C, R-2, R-3, CD) | 5 ft from ROW, 20 ft from adjacent lot lines |
| Ground-Mounted Monument Sign (Agricultural or Nonresidential Use in R District) | 6 ft | 32 sq ft (<5 acres); 50 sq ft (≥5 acres) | 6 ft from ROW, 10 ft from adjacent lot lines, 25 ft from adjacent residential uses |
| Wall Sign (Nonresidential Use in Residential District) | Not listed | See §154.11(I)(2) (If underlying use is nonresidential, see wall signage for nonresidential districts) | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
24
- Development/Subdivision Sign (Residential Districts)
- Ground-Mounted Monument Sign (Agricultural or Nonresidential Use in R District)
- Wall Sign (Nonresidential Use in Residential District)
- Wall Sign (Single-Tenant Building)
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Tipp City
Other Cities in Ohio
Frequently Asked Questions
In Tipp City, the height limit for Ground-Mounted Monument Sign (Agricultural or Nonresidential Use in R District) in the Suburban Residential (R-1A) and other zoning districts is 6 ft (Sec. 154.11(H)(2)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Tipp City require a permit. From the submission notes on this page: A sign plan per se (such as a master sign plan) is NOT required or mentioned for general sign permitting, but every applicant must submit a zoning compliance permit application and comply with all sign code standards. Run a code check for an exact address to see the permit requirements for that zone.
Tipp City's sign code covers 24 sign types, including Development/Subdivision Sign (Residential Districts), Ground-Mounted Monument Sign (Agricultural or Nonresidential Use in R District), Wall Sign (Nonresidential Use in Residential District), and Wall Sign (Single-Tenant Building). Most commercial signs need a permit. The ordinance lists 23 exemptions. One of them: A zoning compliance permit is not required for the maintenance of a sign or for a change of copy on signs with changeable copy. [§154.11(B)(3)(a)]. The full list is on this page.
In Tipp City, Subdivision/Development Sign (Nonresidential; commercial/industrial subdivision, 5+ businesses or 50+ acres) in the Office Service (OS) and other zoning districts must be set back 75 ft from residential lot line (Sec. 154.11(I)(6)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Tipp City's sign ordinance that cover digital, changing, or flashing signs: Signs that employ any parts or elements which revolve, rotate, whirl, spin or otherwise make use of motion to attract attention except for electronic message centers permitted in accordance with this section are prohibited. [§154.11(E)(4)]. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Tipp City Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Tipp City, Ohio, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Tipp City, Ohio Sign Rules at a Glance
Tipp City, Ohio regulates 24 sign types across 7 zoning districts. Subdivision/Development Signs (Nonresidential; commercial/industrial subdivision, 5+ businesses or 50+ acres) in the Office Service (OS) and other zoning districts are capped at 10 ft tall and 36 sq ft, set back 75 ft from residential lot line (Sec. 154.11(I)(6)). Most commercial signs in Tipp City require a permit.
Detailed Sign Ordinance Requirements for Tipp City, Ohio
Sign Rules by Zoning District in Tipp City (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Suburban Residential (R-1A), Neighborhood Residential (R-1B), Urban Residential (R-1C), Two-Family Residential (R-2), Multi-Family Residential (R-3), Conservation District (CD) | 3 | 6 ft | See §154.11(I)(2) (If underlying use is nonresidential, see wall signage for nonresidential districts) | Not listed |
| Office Service (OS), General Business (GB), Highway Business (HB), Community Center (CC), Light Industrial (LI), Legacy Development (LD), General Industrial (GI) | 9 | Maximum 90 ft, minimum 40 ft from grade to bottom of sign | 250 sq ft | Not listed |
| Community Center (CC) | 4 | 5 ft | 15 sq ft | Not listed |
| Old Tippecanoe City Restoration and Architectural District Overlay District (RA) | 3 | Not listed | Not listed | Not listed |
| Flood Hazard Area Overlay District (FA), Well Field Protection Overlay District (WP) | 1 | Not listed | Not listed | Not listed |
| Planned Development District (PD, Discontinued) | 1 | Not listed | Not listed | Not listed |
| General Regulations For All Zones | 3 | Residential: 8 in; Nonresidential: 12–24 in depending on setback | Residential: for sale/lease: 8 sq ft/4 ft high; Nonresidential: <100 ft frontage: 16 sq ft/6 ft high; 100+ ft: 32 sq ft/8 ft high; 500+ ft (certain cases): 64 sq ft/10 ft high | Not listed |
Zone-by-Zone Sign Requirements in Tipp City(sample of 3 of 7 zones)
Suburban Residential (R-1A), Neighborhood Residential (R-1B), Urban Residential (R-1C), Two-Family Residential (R-2), Multi-Family Residential (R-3), Conservation District (CD)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Development/Subdivision Sign (Residential Districts) | 6 ft | 32 sq ft (R districts, CD); 50 sq ft (nonresidential use with lot area 5 acres or more in R-1A, R-1B, R-1C, R-2, R-3, CD) | Not listed | 5 ft from ROW, 20 ft from adjacent lot lines | 1 per primary entrance | At each primary entrance to subdivision/development from a collector or arterial street; set back 5 ft from public ROW, 20 ft from adjacent lot lines | Not listed | Unlock | §154.11(H)(1), (2) |
| Ground-Mounted Monument Sign (Agricultural or Nonresidential Use in R District) | 6 ft | 32 sq ft (<5 acres); 50 sq ft (≥5 acres) | Not listed | 6 ft from ROW, 10 ft from adjacent lot lines, 25 ft from adjacent residential uses | 1 per lot | Set back 6 ft from public ROW, 10 ft from any adjacent lot lines, and 25 ft from any adjacent residential uses | Not listed | Unlock | §154.11(H)(2) |
| Wall Sign (Nonresidential Use in Residential District) | Not listed | See §154.11(I)(2) (If underlying use is nonresidential, see wall signage for nonresidential districts) | Not listed | Not listed | Not listed | On principal building | Not listed | Unlock | §154.11(H)(2)(c) |
Office Service (OS), General Business (GB), Highway Business (HB), Community Center (CC), Light Industrial (LI), Legacy Development (LD), General Industrial (GI)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Single-Tenant Building) | Not listed | Not listed | Not listed | Not listed | No maximum number, but total area per façade limited | On principal building wall facing street, parking lot, or service drive; or on canopy/awning | Not listed | Unlock | §154.11(I)(2); Table 154.11-1; §154.11(J) for restrictions in CC/RA |
| Wall Sign (Multiple-Tenant Space) | Not listed | Not listed | Not listed | Not listed | Not listed | On tenant space’s façade facing public street (may allocate sign area to secondary façades, subject to main limits) | Not listed | Unlock | §154.11(I)(2)(v), (iv) |
| Freestanding Sign (Pole or Monument) | 15 ft for OS/GB; 15 ft for pole/monument in GB, HB, LI, LD, GI. Additional: In special Interstate Sign Districts, up to 90 ft height and 250 sq ft sign area, min 40 ft from grade | GB/OS/LI/HB/LD/GI: 0–150 ft frontage = 50 sq ft; 151–300 ft = 80 sq ft; 301+ ft = 120 sq ft | Not listed | 10 ft from ROW/property line (greater if next to residential lot); special: subdivision/park sign: 75 ft min from residential lot line (§154.11(I)(6)) | 1 per frontage; up to 2 allowed if frontage on 2 public streets; with conditions | 10 ft min setback from ROW/property line; if adjacent to residential lot, setback at least height of sign | Not listed | Unlock | §154.11(I)(4); Table 154.11-1 |
| Subdivision/Development Sign (Nonresidential; commercial/industrial subdivision, 5+ businesses or 50+ acres) | 10 ft | 36 sq ft | Not listed | 75 ft from residential lot line | 1 per primary entrance | Primary entrance; 75 ft from residential lot line | Not listed | Unlock | §154.11(I)(6) |
| Projecting Sign | Not listed | Counts towards wall sign maximum for building/tenant | Not listed | Not listed | Included in wall sign maximum area | Perpendicular to building wall, not beyond curb line/public street | Not listed | Unlock | §154.11(I)(3) |
| Driveway Sign | 3 ft; 6 ft for development over 200,000 sq ft | 4 sq ft; 16 sq ft for development over 200,000 sq ft | Not listed | 5 ft from all lot lines; not more than 25 ft from driveway/internal intersection | 2 per driveway; 1 per internal intersection | 5–25 ft from entrance/drive; 2 per driveway or 1 per internal intersection | Not listed | Unlock | §154.11(I)(5) |
| Drive-Through Sign | 8 ft | 36 sq ft per stacking lane, or 48 sq ft if only one sign per lane | Not listed | Not listed | Up to 2 per stacking lane | In landscape area at drive-through; landscape area size >= sign area | Not listed | Unlock | §154.11(I)(7) |
| Special Interstate Sign District Pole Sign (HB/GB with I-75 frontage, where approved by Council) | Maximum 90 ft, minimum 40 ft from grade to bottom of sign | 250 sq ft | Not listed | Not listed | See code; max 2 on lot with specific frontage | Designated Interstate Sign District areas (see figures in code) | Not listed | Unlock | §154.11(I)(4)(d)(iii); Figs. 154.11-E–G |
Community Center (CC)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (CC) | Not listed | Not listed | Not listed | Not listed | Per wall sign max area; fewest panels/components possible | On principal building walls/above store windows | Not listed | Unlock | §154.11(J)(1), (2), (3) |
| Projecting Sign (CC/RA Overlay) | Not listed | Not listed | Not listed | Not listed | Fewest components/panels possible | Main entrance only | Not listed | Unlock | §154.11(J) |
| Awning Sign (CC/RA Overlay) | Not listed | Not listed | Not listed | Not listed | Not listed | On awning/lintel/window zone | Not listed | Unlock | §154.11(J), Old Tippecanoe City Restoration & Architectural District Design Manual |
| Sidewalk Sign (Temporary, CC/RA Overlay) | 5 ft | 15 sq ft | 3 ft | Not listed | 1 per public entrance | On sidewalk in front of establishment | Not listed | Unlock | §154.11(K)(5) |
PermitPal covers all 7 zoning districts in Tipp City. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Tipp City
- It shall be unlawful for any person to erect, place, or maintain a sign in the city except in accordance with the provisions of this section. [§154.11(B)(1)(a)]
- Signs that are applied to trees, bus shelters, utility poles, benches, trash receptacles, newspaper vending machines or boxes, or any other unapproved supporting structure, or otherwise placed in the public right-of-way, are prohibited. [§154.11(E)(2)]
- Billboards and other off-premise signs are prohibited unless specifically allowed for temporary signage. [§154.11(E)(1)]
- Pennants, streamers, and other similar type devices are prohibited. [§154.11(E)(3)]
- Signs that employ any parts or elements which revolve, rotate, whirl, spin or otherwise make use of motion to attract attention except for electronic message centers permitted in accordance with this section are prohibited. [§154.11(E)(4)]
- All portable advertising signs (mobile signs on wheels) except for sidewalk signs permitted in accordance with §154.11(K)(5) are prohibited. [§154.11(E)(5)]
- Laser lights, beacons, and searchlights, except for emergency purposes, are prohibited. [§154.11(E)(6)]
- Balloons with a commercial message or air-activated graphics filled with helium, gas, air, or any other gaseous material either suspended from or affixed to a structure, vehicle, or ground, intended to be used for commercial purposes are prohibited. [§154.11(E)(7)]
- Motor vehicles, tractor trailers, or similar vehicles with signs painted on, attached to, or otherwise affixed to the vehicle shall not be parked or stored long-term on a lot as a form of signage. [§154.11(E)(8)]
- Any sign that utilizes illumination by means of bare bulbs, flames, or both, is prohibited. [§154.11(E)(9)]
- Roof signs are prohibited. [§154.11(E)(10)]
- Signs may not be installed in any public right-of-way, except as specifically authorized by this section. [§154.11(F)(1)]
- Signs may not be installed in any utility easement, intersection visibility areas, or other areas where structures are prohibited. [§154.11(F)(2)]
- Signs may not be installed in any public park or other public property, except as expressly authorized. [§154.11(F)(3)]
- Signs may not be installed on any traffic-control signs, construction signs, fences, utility poles, street signs, trees or other natural objects. [§154.11(F)(4)]
- Signs may not obstruct the view of approaching and intersecting traffic, or be located so as to interfere with the safe movement of vehicles or pedestrians entering, leaving, or crossing a public right-of-way. [§154.11(F)(5)]
- Signs may not be installed on a bench, where the sign is legible from the public right-of-way. [§154.11(F)(6)]
- Signs may not be installed in any residential area, except as expressly permitted in this section. [§154.11(F)(7)]
- Signs may not be installed on any property without the prior authorization granted by the property owner. [§154.11(F)(8)]
- The replacement of wood windows with vinyl windows is prohibited in the RA (Restoration) District. [Appx B, Windows, #13]
- The installation of vinyl storm windows is prohibited in the RA District. [Appx B, Windows, #14]
- The addition of snap-in grids or grids placed between full panes of glass to give the appearance of a multi-pane sash is prohibited in the RA District. [Appx B, Windows, #6]
- Shutters: flat and/or vinyl shutters are prohibited in the RA District. [Appx B, Shutters, #7]
- Back-lit vinyl awnings and metal or rigid awnings are prohibited in the RA District. [Appx B, Awnings, #10 and #11]
- Painting brick or masonry that has not previously been painted is prohibited unless painting is consistent with the building's style or era. [Appx B, Siding and Exterior Wall Materials, Brick, #5]
- Artificial stone, asbestos, asphalt shingles, and other similar resurfacing materials are prohibited except where needed to repair buildings already using such materials. [Appx B, Siding, #3]
- Siding of any kind shall not be used to cover or replace brick walls in the RA District. [Appx B, Siding, #4]
- Replacing horizontal lap siding with a vertical panel-type plywood siding is prohibited in the RA District. [Appx B, Siding, #6]
- The use of aluminum or vinyl siding, asbestos, and formed stone are not appropriate and should not be used in the RA District, unless original scale/trim is maintained. [Appx B, Siding, #10]
- Because of the significant contribution the porch makes to the historic character of the building, it is never appropriate to enclose a front porch or balcony in the RA District. [Appx B, Porches and Decks, #1]
- Enclosure of side or rear porches is discouraged in the RA District. [Appx B, Porches and Decks, #1]
- Demolition by neglect (failure to maintain historic structures in the RA District) is prohibited. [§154.05(C)(7)(c)(ii)]
Exempt Signs in Tipp City
- Any sign located entirely within buildings or other structures and/or otherwise not visible from the public right-of-way or from property other than the property on which the sign is located is exempt. [§154.11(B)(2)(a)]
- Any sign located on umbrellas or similarly related private patio furniture or seating is exempt. [§154.11(B)(2)(b)]
- Any sign on a truck, bus or other vehicle that is used in the normal course of a business for transportation is exempt. [§154.11(B)(2)(c)]
- Any noncommercial holiday lighting, signs, or related decorations are exempt. [§154.11(B)(2)(d)]
- A zoning compliance permit is not required for the maintenance of a sign or for a change of copy on signs with changeable copy. [§154.11(B)(3)(a)]
- A zoning compliance permit is not required for general maintenance, painting, repainting, cleaning and other normal maintenance and repair of a sign or any sign structure unless a structural change is made that results in more than a minor modification. [§154.11(B)(3)(b)]
- Wall signs with a maximum area of 2 square feet attached to the façade of a residential dwelling do not require a permit. [§154.11(B)(3)(c)(i)]
- Governmental signs for control of traffic and other regulatory purposes, street signs, warning signs, railroad crossing signs, way-finding signs, and signs of public service companies for the purpose of safety do not require a permit. [§154.11(B)(3)(c)(ii)]
- Commemorative plaques placed by a local, state, or federally recognized historical agency, with a maximum sign area of 48 sq ft and height of 6 ft, do not require a permit. [§154.11(B)(3)(c)(iii)]
- Interior signs within a stadium, open-air theater, shopping center, arena or other use, viewable only by persons inside that facility, do not require a permit. [§154.11(B)(3)(c)(iv)]
- Certain temporary signs with a commercial message as established in §154.11(K) do not require a permit. [§154.11(B)(3)(c)(v), §154.11(K)]
- Signs that have no commercial message are permitted in all districts without a zoning compliance permit, but must comply with placement and maintenance standards. [§154.11(B)(3)(c)(vi)]
- Flags and flag poles (with size and type limitations) do not require a permit. [§154.11(B)(3)(c)(vii)]
- Street address signs do not require a permit (subject to size and placement requirements). [§154.11(B)(3)(c)(viii)]
- Incidental signs (wall not larger than 2 sq ft, detached not larger than 4 sq ft/3 ft high, non-commercial message) do not require a permit. [§154.11(B)(3)(c)(ix)]
- Window signs in accordance with area limitations are exempt from permitting. [§154.11(B)(3)(c)(x)]
- Signs conforming to the Manual of Uniform Traffic Control Devices and bearing no commercial message are permitted without a permit. [§154.11(C)(1)(a)]
- Signs installed by state/federal agency officials, or required by statute or court order, or by public utilities in their ROW/facilities bearing no commercial message other than for identification, do not require a permit. [§154.11(C)(1)(b-f)]
- Maintenance (as defined in the Restoration District guidelines) does not require a COA as long as any work does not result in a change of materials, color, addition or removal of any architectural or building element. [Appx B, Maintenance/Paint and Color]
- For RA District: Ordinary repairs and replacements using exact same materials, colors, and style do not require a COA. [Appx B, Ordinary Repairs and Maintenance]
- Signs in the RA District (Old Tippecanoe) that are specifically designated as 'special signs' related to Tipp City's history are exempt from area/allocation limitations. [§154.11(J)(3)]
- City-owned, city-operated, or city-maintained street lights located within a street right-of-way or other easement granted to the city are exempt from outdoor lighting standards. [§154.07(B)(2)(a)(iii)]
- Lots with single-family and two-family dwellings are exempt from most outdoor lighting standards (except for spillover). [§154.07(B)(2)(a)(i)]
Sign Plan & Submission Notes for Tipp City
- Unless otherwise provided by this section, all signs shall require a zoning compliance permit and payment of fees (§154.11(B)(3)).
- A separate Certificate of Appropriateness (COA) is not required for signs in the RA Overlay District; a zoning compliance permit is still required and reviewed by the Zoning Administrator. [§154.11(J)(2)]
- Any sign in the RA (Restoration) District is NOT subject to a COA, but is still subject to a zoning compliance permit and review by the Zoning Administrator. [§154.11(J)(2)]
- A sign plan per se (such as a master sign plan) is NOT required or mentioned for general sign permitting, but every applicant must submit a zoning compliance permit application and comply with all sign code standards.
- Site plan review is required for all new non-residential development or multi-family development (but not specifically for Master Sign Plans except as otherwise required). [§154.03(F)]
- Landscape plans are required as part of the site plan, zoning permit, or zoning compliance permit applications where new development (excluding single and two-family dwellings) is subject to landscaping standards. Sign locations must be identified on the plans where applicable for landscaping requirements (e.g., monument signs). [§154.09(B)(3)]
- Major modifications to approved COA/site plan/variance/planned development may require new or amended plans and additional review by staff, the Planning Board, or Restoration Board as noted in §154.03(E)-(G).
- Signs are not included in the official 'site plan review' process except possibly as indicated on the site/landscape plan for new construction, or where specific review by the Restoration Board is required for other purposes.
- COA is required in the RA (Restoration) District before making any exterior construction, reconstruction, alteration, or demolition, EXCEPT for signs, which only require zoning compliance permit. [§154.05(C)(2)]
- No sign plan (Master Sign Plan, etc.) or variance hearing is generally required for standard permitted signs, unless applying for a variance from the sign code or seeking alternative equivalent compliance. [See §154.03(K)]
Source: municode municipal code