Sign Regulations in Buckingham Township, Pennsylvania
Buckingham Township, Pennsylvania has specific sign regulations covering 55 sign types across 8 zoning districts. Regulated sign types include Decorative Flags, Directional Sign (Driveway access), Signs permitted by Section 3203 (where the referenced use is permitted). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: January 16, 2026
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Buckingham Township, Pennsylvania
Sample Sign Requirements in Buckingham Township
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| All Signs - Placement and Setbacks | Not listed | Not listed | Minimum 15 ft from edge of cartway or curb, or outside the legal right-of-way, whichever is greater; minimum 10 ft from side lot line. |
| Development Entrance Signs or Walls (Temporary) | Not listed | Not listed | Must comply with general setback and visibility standards; not in clear sight triangle. |
| Temporary Off Premises Advertising Sign (General) | Not listed | 6 sq ft per side | Must comply with general setbacks and placement rules. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
55
- Decorative Flags
- Directional Sign (Driveway access)
- Signs permitted by Section 3203 (where the referenced use is permitted)
- Total Sign Area Allocation (Individual Use on Individual Lot)
- +2 more types
Zoning Districts
8
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Buckingham Township
Other Cities in Pennsylvania
Frequently Asked Questions
In Buckingham Township, the height limit for Freestanding Sign (Individual Lot) in the VC-2 District; VC-3 District; LC District is 8 ft (Sec. 3206.B(2)(a)-(b)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Buckingham Township require a permit. From the submission notes on this page: Detailed plans showing supporting structural members and foundations must be submitted to the Building Inspector for approval before a permit is issued; an engineer’s seal may be required when deemed necessary to public safety (Section 3209.B). Run a code check for an exact address to see the permit requirements for that zone.
Buckingham Township's sign code covers 55 sign types, including Decorative Flags, Directional Sign (Driveway access), Signs permitted by Section 3203 (where the referenced use is permitted), and Total Sign Area Allocation (Individual Use on Individual Lot). Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Changing movable parts of an approved sign designed for such changes, or repainting/reposting display matter, is not deemed an alteration and does not trigger a new permit, provided original approval conditions are not violated (Section 3213.A). The full list is on this page.
This page doesn't list a single setback distance for signs in Buckingham Township. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Buckingham Township's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Buckingham Township Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Buckingham Township, Pennsylvania, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Buckingham Township, Pennsylvania Sign Rules at a Glance
Buckingham Township, Pennsylvania regulates 55 sign types across 8 zoning districts. Freestanding Signs (Individual Lot) in the VC-2 District; VC-3 District; LC District are capped at 8 ft tall and 20 sq ft (Sec. 3206.B(2)(a)-(b)). Most commercial signs in Buckingham Township require a permit.
Detailed Sign Ordinance Requirements for Buckingham Township, Pennsylvania
Sign Rules by Zoning District in Buckingham Township (8 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 5 | Not listed | 6 sq ft per side | Not listed |
| Agricultural Districts; Residential Districts (R-1 through R-9); Village Residential Districts; MHP Districts | 15 | Freestanding: 6 ft max height | 24 sq ft | Not listed |
| Planned Business & Residential District; VR-3 District | 2 | Freestanding: 6 ft | Not listed | Not listed |
| I Institutional District | 7 | 12 ft to top of sign from ground level | 20 sq ft per side | Not listed |
| VC-1 District | 6 | Freestanding signs under Section 3203: 6 ft | 12 sq ft | Not listed |
| VC-2 District; VC-3 District; LC District | 14 | Freestanding signs under Section 3203: 6 ft | 40 sq ft per side | Not listed |
| PC-1 District; PC-2 District; PI District; PI-2 District | 11 | Freestanding signs under Section 3203: 6 ft | Up to 100 sq ft face area; max 10 ft height x 15 ft length per face | Not listed |
| NVO Neighborhood Village Office Districts | 5 | 4 ft above surrounding ground | 24 inches by 8 inches (1.33 sq ft) | Not listed |
Zone-by-Zone Sign Requirements in Buckingham Township(sample of 3 of 8 zones)
Agricultural Districts; Residential Districts (R-1 through R-9); Village Residential Districts; MHP Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Temporary Sale or Rental Sign (On-Premises) | Not listed | 12 sq ft | Not listed | Must comply with general setbacks. | Not listed | On the premises being sold or rented. | Not listed | Unlock | Section 3203.B(1)-(2); Section 3203 (intro, illumination) |
| Temporary Development/Sales Sign (Builder/Developer) | Not listed | 24 sq ft | Not listed | Must comply with general setbacks. | Not listed | On premises under development/sale. | Not listed | Unlock | Section 3203.C(1)-(2); Section 3203 (intro, illumination) |
| Temporary Civic/Social/Political/Fundraising Sign (Not otherwise described) | Not listed | 16 sq ft per side | Not listed | Must comply with general setbacks. | Township-wide cap: 7 per event/cause | As permitted by zoning officer; must comply with setbacks. | Not listed | Unlock | Section 3203.F(1)-(3); Section 3203 (intro, illumination) |
| Professional/Home Occupation/Name Sign (Residential) | Not listed | 3 sq ft per side | Not listed | Must comply with general setbacks. | 1 per permitted use or dwelling unit | On the dwelling/property. | Not listed | Unlock | Section 3203.H(1)-(2); Section 3203 (intro, illumination) |
| Temporary Mechanics/Contractors/Artisans Sign | Not listed | 6 sq ft per side | Not listed | Must comply with general setbacks. | 1 per mechanic/contractor/artisan | On premises where work is being performed. | Not listed | Unlock | Section 3203.I(1)-(3); Section 3213.A.2.d; Section 3203 (intro, illumination) |
| Temporary Agricultural/Horticultural Product Sale Sign (On-Premises) | Not listed | 12 sq ft per side | Not listed | Must comply with general setbacks. | 1 on the lot where sales occur | On the lot where products are sold. | Not listed | Unlock | Section 3203.K(1)-(3),(6); Section 3203 (intro, illumination) |
| Temporary Agricultural/Horticultural Product Sale Sign (Off-Premises) | Not listed | 4 sq ft per side | Not listed | Must comply with general setbacks. | Township-wide cap: 7 off-premises signs per establishment | Off-premises with written permission of the property owner where the sign is placed. | Not listed | Unlock | Section 3203.K(1)-(5); Section 3203 (intro, illumination) |
| Sign Advertising Nonresidential Uses (Where permitted as principal or valid non-conforming) | Freestanding: 6 ft max height | 12 sq ft per side | Not listed | Freestanding must comply with general setbacks. | As permitted per use; general one-sign rule may be superseded by this allowance. | On the lot of the nonresidential use. | Not listed | Unlock | Section 3203.L(1)-(3); Section 3203.M; Section 3203 (intro, illumination) |
VC-2 District; VC-3 District; LC District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Signs permitted by Section 3203 (where the referenced use is permitted) | Freestanding signs under Section 3203: 6 ft | Not listed | Not listed | Must comply with general setbacks. | Not listed | On-premises. | Not listed | Unlock | Section 3206.A |
| Total Sign Area Allocation (Individual Use on Individual Lot) | Not listed | 20 sq ft total (cap after formula) | Not listed | Not listed | Up to 3 separate signs within total area | On the individual lot; applies only where the use does not share a lot or common building entrance. | Not listed | Unlock | Section 3206.B(1)-(2) |
| Freestanding Sign (Individual Lot) | 8 ft | 20 sq ft | Not listed | Must comply with general setbacks. | 1 per lot | On-premises. | Not listed | Unlock | Section 3206.B(2)(a)-(b) |
| Entrance Signs (Joint Use of a Lot) | 4 ft above surrounding ground | Total of both signs combined: 15 sq ft; each sign no more than 10 ft long and 18 inches high | Not listed | Must comply with general setbacks and visibility. | 2 (one on either side of driveway) | At joint driveway entrance(s). | Not listed | Unlock | Section 3206.D(1) |
| Directory Sign (Joint Use of a Lot) | 8 ft | 40 sq ft per side | Not listed | Must comply with general setbacks. | 1 | Freestanding within the development. | Not listed | Unlock | Section 3206.D(2) |
| Building Directory Sign (Joint Use of a Lot) | 4 ft | 12 sq ft | Not listed | Not listed | 2 per building (front and rear) | Mounted on the building (front and rear). | Not listed | Unlock | Section 3206.D(3) |
| Freestanding Sign substitution (Uses E28 and E29 only) | 8 ft | Up to 24 sq ft (not to exceed the size of the plaque sign otherwise permitted) | Not listed | Must comply with general setbacks. | Substitution of 1 freestanding for 1 plaque sign | On the individual establishment’s lot/building frontage. | Not listed | Unlock | Section 3206.D(9)(a)-(b) |
| Building Entrance Directory Sign (LC District only) | Not listed | Up to width 36 inches and height 40 inches | 36 inches | Not listed | Max 2 per front building entrance | Attached to the building at the main entrance to interior offices/establishments (LC only). | Not listed | Unlock | Section 3206.D(10) |
PC-1 District; PC-2 District; PI District; PI-2 District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Signs permitted by Section 3203 (where the referenced use is permitted) | Freestanding signs under Section 3203: 6 ft | Not listed | Not listed | Must comply with general setbacks. | Not listed | On-premises. | Not listed | Unlock | Section 3207.A |
| Total Sign Area Allocation (Individual Use on Individual Lot) | Not listed | As computed by formula; building sign also capped at 60 sq ft by separate limit. | Not listed | Not listed | Up to 3 separate signs within total area | On the individual lot; applies only where the use does not share occupancy of a lot or a common building entrance. | Not listed | Unlock | Section 3207.B(1)-(2) |
| Freestanding Sign (Individual Lot) | 8 ft | 32 sq ft | Not listed | Must comply with general setbacks. | 1 per lot | On-premises. | Not listed | Unlock | Section 3207.B(2)(a)-(b) |
| Directory Sign (Joint Use of a Lot) | 8 ft | Up to 40 sq ft per side | Not listed | Must comply with general setbacks. | 1 | Freestanding on the lot. | Not listed | Unlock | Section 3207.D(1) |
| Building Directory Sign (Joint Use of a Lot) | 4 ft | 12 sq ft | Not listed | Not listed | 2 per building (front and rear) | Mounted on the building. | Not listed | Unlock | Section 3207.D(2) |
| Window or Building Wall Signs (Joint Use of a Lot - per establishment) | Not listed | 15% of wall area | Not listed | Not listed | 2 per individual use | On the wall/window of the individual use. | Not listed | Unlock | Section 3207.D(3) |
| Directional Signs (Joint Use of a Lot) | Not listed | 3 sq ft | Not listed | Not listed | As specified by access/entrances | At every point of access into the lot and at entrances to parking areas. | Not listed | Unlock | Section 3207.D(4); Section 3213.A.2.e |
| Off Premises Advertising Sign (PC-1 and PI only) | 30 ft overall (including supporting structure) | Up to 100 sq ft face area; max 10 ft height x 15 ft length per face | 15 ft (face length limit) | Within buildable area; comply with district area requirements; height measured from natural grade. | Max 1 structure per zoning lot; up to 2 faces back-to-back | Only in PC-1 and PI Districts; must be within the buildable area of the lot per applicable setbacks. | Not listed | Unlock | Section 3207.E(1)-(11); Section 3202.I(5) |
PermitPal covers all 8 zoning districts in Buckingham Township. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Buckingham Township
- No more than one sign shall be placed on any property held in single and separate ownership, unless the property fronts more than one public street, in which case one sign may be erected on each street frontage (Section 3202.A).
- Signs may be placed only on the same lot as the use or establishment to which the sign relates, unless specifically permitted off-premises by this Ordinance (Section 3202.B).
- No sign shall be placed so as to cause danger to traffic, obscure views, interfere with the effectiveness of an official traffic control device, or be located in a clear sight triangle (Section 3202.C).
- No sign shall be erected or maintained within 15 feet of the edge of the cartway or curb or be located within, or project over, the legal right-of-way of any street or road (Section 3202.D.1).
- No sign shall be erected or maintained within 10 feet of a side lot line, except as specifically permitted (Section 3202.D.2).
- No sign shall be placed on Township property except for signs installed or required by the Township (Section 3202.D.3).
- No sign along a state road or right-of-way may violate PennDOT regulations (Section 3202.D.4).
- No sign shall be erected or maintained within a parking space or fire lane (Section 3202.D.5).
- Signs over two square feet are considered structures and must comply with the Zoning Ordinance, Municipal Building Code, and other applicable Township regulations (Section 3202.E).
- Prohibited signs (Section 3202.F): flashing, rotating, or revolving signs (except barber poles); novelty signs including objects such as tires, automobiles, food products, pennants, banners, balloons, bulletin boards, and animated signs; roof signs; any sign suspended between poles and lighted by a series of lights; signs attached to a tree or utility pole, or painted on rocks or natural features; any banner or sign across a public street or on private property unless approved by the Board of Supervisors for general municipal benefit or public convenience/necessity/welfare; any sign suspended between poles that is a pennant or spinner; any sign imitating an official traffic sign, signal, or device; vehicles or trailers parked to display advertising visible from a right-of-way; any sign not conforming to the sign ordinance in effect when erected; any sign implying a property use not permitted by zoning for that property; any sign visible outside a structure containing neon or other gases in exposed tubes; lighting outlining building edges; backlit signs that do not comply with Section 3201.D.2.
- All permanent signs must be professionally lettered and neatly displayed (Section 3202.G).
- Interior neon signs (or similar) shall not be visible from any public road or adjoining property (Section 3202.H, and reinforced by Section 3202.F.12).
- Illumination restrictions applicable to all signs (Sections 3201.D and 3202.I): externally lit signs must use white or clear light only, use fully shielded fixtures, have non-visible light sources, and avoid horizontal or vertical light spill; internally illuminated signs must use white or clear internal light sources; no red, green, or yellow illuminated signs; no flashing, intermittent, or moving lights; internally illuminated signs must use dark backgrounds with light letters; illuminated signs facing an occupied dwelling unit in agricultural or residential districts are prohibited within 200 feet; all signs must comply with Section 3016 Lighting.
- No sign shall be erected containing information that states or implies a property use not permitted by the Zoning Ordinance for the zoning district (Section 3202.F.11).
Exempt Signs in Buckingham Township
- Items not considered signs and therefore outside this Article: merchandise, pictures, or models of products/services in a window display; holiday decorations customarily displayed without business advertising; works of art or constructs that do not promote a product, service, premises, business, location, event, organization, or activity (Section 3201.A, 'A sign does not include').
- Interior signs placed more than 12 inches from the interior surface of a window are not regulated by this Ordinance; however, neon (or similar) signs shall not be visible from any public road or adjoining property (Section 3202.H).
- Permit-exempt sign types (a zoning permit is not required), subject to applicable size and placement regulations in Sections 3202 and 3203 (Section 3213.A.2): official highway, traffic control, and street signs; temporary signs advertising the sale or rental of a property; trespassing signs; temporary signs of mechanics and contractors; directional and public service information signs; signs placed inside a building more than 12 inches from a window or door; temporary signs advertising political parties or candidates for election.
- Changing movable parts of an approved sign designed for such changes, or repainting/reposting display matter, is not deemed an alteration and does not trigger a new permit, provided original approval conditions are not violated (Section 3213.A).
Sign Plan & Submission Notes for Buckingham Township
- A zoning permit is required prior to the erection, structural repair, alteration, or relocation of any sign; applications must include a plot plan (showing all existing structures, including signs), a sketch of design and lettering, and construction plans with loads, stresses, anchorage, and relevant engineering data (Section 3213.A).
- Work authorized by a sign zoning permit must commence within one year of permit issuance or the permit becomes null and void (Section 3213.A.1).
- Detailed plans showing supporting structural members and foundations must be submitted to the Building Inspector for approval before a permit is issued; an engineer’s seal may be required when deemed necessary to public safety (Section 3209.B).
- The Building Inspector will inspect every sign for which a permit is required within 10 days after work is completed (Section 3213.B).
- Any sign intended to be used or included in any development or plan of building or development submitted to the Township must be identified in the plan, including the sign’s location, size, materials, and purpose (Section 3213.D).
- Development entrance signs or walls must have design and location approved with the development plans; removal is required upon project completion and initial sale of units unless the Board of Supervisors approves retention; escrow is required to ensure removal (Section 3202.J).
- No explicit 'Master Sign Plan' terminology or variance meeting requirement is stated in the provided text; however, signs must be shown and detailed within broader development plan submissions per Section 3213.D.
Source: other municipal code