Sign Regulations in Harmar Township, Pennsylvania
Harmar Township, Pennsylvania has specific sign regulations covering 26 sign types across 4 zoning districts. Regulated sign types include General Sign Regulation, Patriotic Flags and Banners, No Hunting/No Trespassing Signs, Holiday Decorations, Street Address Numbers, Identification Sign (Property/Home Occupation). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Sign Regulation Overview for Harmar Township, Pennsylvania
Sample Sign Requirements in Harmar Township
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| General Sign Regulation | — | — | Min. 10 ft setback from street pavement or as determined by Zoning Officer if necessary for sight lines. |
| Identification Sign (Property/Home Occupation) | 10 ft | 2 sq ft | — |
| Identification Sign (Multifamily Building) | 10 ft | 6 sq ft | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
26
- General Sign Regulation
- Patriotic Flags and Banners, No Hunting/No Trespassing Signs, Holiday Decorations, Street Address Numbers
- Identification Sign (Property/Home Occupation)
- Identification Sign (Multifamily Building)
- +2 more types
Zoning Districts
4
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Harmar Township
Other Cities in Pennsylvania
Frequently Asked Questions
Sign height limits in Harmar Township vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Harmar Township, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Harmar Township, regulated sign types include General Sign Regulation, Patriotic Flags and Banners, No Hunting/No Trespassing Signs, Holiday Decorations, Street Address Numbers, Identification Sign (Property/Home Occupation), Identification Sign (Multifamily Building), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Harmar Township vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Harmar Township are regulated with specific requirements for brightness, animation, and message duration. Harmar Township has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Harmar Township Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Harmar Township, Pennsylvania sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Harmar Township, Pennsylvania Sign Rules at a Glance
Harmar Township, Pennsylvania regulates 26 sign types across 4 zoning districts. Institutional Sign - Monuments in the Residential Zone Districts (R-1, R-2, R-3) zoning district are capped at 5 ft tall and 50 sq ft, with a Not less than 10 ft from side lot line. setback (Sec. § 27-702.3(B),(C),(G)). Most commercial signs in Harmar Township require a permit.
Detailed Sign Ordinance Requirements for Harmar Township, Pennsylvania
Sign Rules by Zoning District in Harmar Township (4 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 2 | — | — | — |
| Residential Zone Districts (R-1, R-2, R-3) | 9 | 10 ft | 120 sq in (0.83 sq ft) | — |
| Commercial and Industrial Districts (C-1, C-2, C-3, I) | 13 | Up to 50 ft | Up to 500 sq ft per face | — |
| R-T Residential Transition District | 2 | 10 ft | 30 sq ft per face | — |
Zone-by-Zone Sign Requirements in Harmar Township(sample of 3 of 4 zones)
Residential Zone Districts (R-1, R-2, R-3)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign (Property/Home Occupation) | 10 ft | 2 sq ft | — | — | One per yard abutting a street (max two signs on a corner/double frontage lot). | Placed in front yard between principal building and front lot line, at least 5 ft from side lot line, or on front wall/fence facing the street; may not project into public right-of-way. | — | Unlock | § 27-702.1(A)-(F) |
| Identification Sign (Multifamily Building) | 10 ft | 6 sq ft | — | — | Same as above. | Same as standard identification sign. | — | Unlock | § 27-702.1(D)(2),(E)-(F) |
| For Sale/Rent, Development, Artisan Sign | 10 ft | 10 sq ft | — | — | One for sale/rent or development sign, not more than two artisan signs per yard abutting a street, in not more than two yards on any property abutting a street. | Freestanding in front yard between principal building and front lot line, or on front wall/fence facing street if yard does not provide visibility. | — | Unlock | § 27-702.2(A)-(H) |
| Institutional Sign - Monument | 5 ft | 50 sq ft | — | Not less than 10 ft from side lot line. | One per yard abutting a street (max two per lot abutting two/more streets). | Front yard area between principal building and front lot line, not less than 10 ft from side lot line, or on front wall. | — | Unlock | § 27-702.3(B),(C),(G) |
| Institutional Sign - Wall or Freestanding | 10 ft | 30 sq ft | — | — | Same as institutional monument sign. | Same as institutional monument sign. | — | Unlock | § 27-702.3(E)-(G) |
| Temporary Sign | 10 ft | 32 sq ft | — | — | Not more than three off-premises and two on-premises signs. | Yards abutting streets (not in street right-of-way), attached to fences, buildings, poles, or own support with property owner approval. | — | Unlock | § 27-702.4(A)-(G) |
| Incidental Sign - Standard | 4 ft | 2 sq ft | — | — | One at each access to parking lot, one in lot for info, one at each private driveway. | At entrances/exits of parking lots, at a place in the lot, and at private driveways (not in public right-of-way). | — | Unlock | § 27-702.5(B)-(G) |
| Incidental Sign - Parking Lot Information | 8 ft | 10 sq ft | — | — | One per parking lot info use. | In parking lot (not in public right-of-way). | — | Unlock | § 27-702.5(E)-(F) |
Commercial and Industrial Districts (C-1, C-2, C-3, I)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (C-1 Zone) | 35 ft (up to 50 ft if >50,000 sq ft floor area) | 100 sq ft per face | — | Min. 10 ft (commercial/industrial), 20 ft (residential abutment). | One per street frontage, max two per lot, not more than one facing same street. | Between principal building and abutting street; min. 10 ft from side lot line if abutting commercial/industrial zone, 20 ft if abutting residential. | — | Unlock | § 27-703.1(A)-(H) |
| Freestanding Sign (C-2, C-3, I Zones) | 35 ft (up to 50 ft if >50,000 sq ft) | 200 sq ft per face | — | See above. | Same as above. | Same as above. | — | Unlock | § 27-703.1(D)-(H) |
| Freestanding Sign (Complex/Business >50,000 sq ft) | Up to 50 ft | Up to 500 sq ft per face | — | See above. | Only one. | Single sign for entire complex or site. | — | Unlock | § 27-703.1(F) |
| Wall-Mounted Sign | — | 10% of wall OR 60 sq ft, whichever is greater | — | — | One per street wall per business, max two on corner lots. | Above street/ground floor windows and below top of wall. Projecting max one foot from wall, may encroach public right-of-way by one foot. | — | Unlock | § 27-703.2(A)-(E) |
| Projecting Sign (C-1 Zone) | 25 ft (bottom at 8 ft above ground, 14 ft above driveway) | 20 sq ft | — | — | One per property, or one per street on corner lots (max two). | Lowest edge min 8 ft above ground, 14 ft above driveway. | — | Unlock | § 27-703.3(A)-(F) |
| Projecting Sign (C-2, C-3, I Zones) | 25 ft (bottom at 8 ft above ground, 14 ft above driveway) | 40 sq ft | — | — | Same as above. | As above. | — | Unlock | § 27-703.3(D)-(F) |
| Monument Sign | 8 ft | 100 sq ft per face | — | — | One per street, second allowed on street on corner lots. | Between principal building and abutting street (or street corners for corner lots) without interfering with sight lines. | — | Unlock | § 27-703.4(A) |
| Billboard (I Zone only) | 35 ft | 300 sq ft per side | — | Min. 100 ft from street right-of-way. | One per lot. | I Industrial Zone only; must be at least 100 ft from street right-of-way and be the only structure on the lot. | — | Unlock | § 27-703.4(D) |
R-T Residential Transition District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| All Signs (Property in Residential Use) | Refer to R-1, R-2, R-3 regulations | Refer to R-1, R-2, R-3 regulations | — | — | — | See standards for R-1, R-2, R-3 | — | Unlock | § 27-704.1 |
| All Signs (Property in Nonresidential Use) | 10 ft | 30 sq ft per face | — | — | — | Standards per Commercial/Industrial Districts, unless below size/height limits. | — | Unlock | § 27-704.2(A)-(D) |
PermitPal covers all 4 zoning districts in Harmar Township — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 4 zones for Harmar Township — start freeProhibited Signs in Harmar Township
- No sign shall be permitted to be placed upon the roof of any structure or to project above the parapet wall of a flat-roofed building or above the gutter line of a sloped roofed building. Exception: A sign integrated into a sloped roof or attached to a wall hiding roof-mounted mechanical equipment, as part of the building's original design, may be permitted.
- No animated signs, no signs illuminated by a flashing, pulsating or intermittent source, no strings of bare bulbs (except holiday decorations), and no signs lighted in such a manner as to create glare conditions on adjacent or nearby properties or streets, or to be capable of causing confusion with traffic control devices shall be permitted.
- All signs shall be located so that sight lines for drivers entering a public street are not compromised.
- Signs and sign structure, except for projecting signs, shall not extend into a public right-of-way and in any case no part of a sign or structure shall be closer than 10 feet to a street pavement. The Zoning Officer may require a greater setback if road conditions require it.
- Signs shall be removed not more than 60 days after the use or activity on the same property that they advertise has been removed. If the building that housed the use or activity remains, the sign structure may also remain.
- Signs that would not be permitted under the terms of this Part may not be increased in size or relocated, although the sign's message may be changed. Once such a sign structure has been removed, it may not be replaced, enlarged or relocated except in conformance with this Part.
Exempt Signs in Harmar Township
- This section shall not apply to the display of patriotic flags or banners.
- "No hunting" or "no trespassing" signs are exempt.
- Christmas or other holiday decorations placed on a temporary basis are exempt.
- Street address numbers are exempt.
Sign Plan & Submission Notes for Harmar Township
- Anyone wishing to erect a sign or signs to be in place for at least 60 days regardless of type or size, shall apply to the Zoning Officer, submitting a plan of the lot showing the location of the sign, dimensions to property lines and buildings; the length, width and height of the sign and distance between the top of the sign and ground below as depicted on an elevation view of the sign; and construction details indicating materials to be used and method of attachment to a building or the ground, including guying.
- Freestanding signs covered by this section shall be designed by either a registered professional engineer or the company providing the sign, as attested on the drawings submitted for the permit.
- Permits shall be required for all signs over six square feet in area, which shall be valid for the life of the sign.
Source: ecode360 municipal code