Questions? Call us at (262) 218-2915

Sign Regulations in Lancaster, Pennsylvania

Lancaster, Pennsylvania has specific sign regulations covering 28 sign types across 12 zoning districts. Regulated sign types include Billboard, Arcade Sign, Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 21, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Lancaster, Pennsylvania

Sample Sign Requirements in Lancaster

Sign TypeMax HeightMax AreaSetback
Awning SignNot listedAdvertising copy/symbols may not exceed 50% of area of awning surface on which it is located.Not listed
BannerShall not exceed 25 feet above grade; shall not be less than 8 feet above grade.Not listedNot listed
Billboard40 feet above street grade to which it is oriented.300 sq ft normally; up to 672 sq ft if oriented toward US Rtes 283/30.20' front, 10' secondary front, 12' side, 25' rear.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for LancasterFull Coverage

Sign Types Covered

28

  • Billboard
  • Arcade Sign
  • Awning Sign
  • Banner
  • +2 more types

Zoning Districts

12

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Lancaster

Municipal Code2 permit application links available

Frequently Asked Questions

In Lancaster, the height limit for Freestanding Sign (Residential Districts) is 6 ft in residential districts (Sec. 255-12(E)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Lancaster require a permit. From the submission notes on this page: All signs require a sign permit unless specifically exempted; the permit application must be completed by the installer or property owner/occupant prior to installation. Run a code check for an exact address to see the permit requirements for that zone.

Lancaster's sign code covers 28 sign types, including Billboard, Arcade Sign, Awning Sign, and Banner. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Display of merchandise either behind store windows or outdoors is not considered a sign. The full list is on this page.

This page doesn't list a single setback distance for signs in Lancaster. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Lancaster's sign ordinance that cover digital, changing, or flashing signs: Flashing signs or signs with strobe effects shall be prohibited in all districts except that temporary detour or road construction signs may flash warning messages. No flashing, illusionary movement or other form of illuminated sign shall be programmed, illuminated or operated in a fashion that would distract or impair a motorist's ability to see or drive safely. Temporary detour or road construction signs may flash warning messages, even where flashing signs are otherwise prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Lancaster Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Lancaster, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Lancaster, Pennsylvania Sign Rules at a Glance

Lancaster, Pennsylvania regulates 28 sign types across 12 zoning districts. Campus Directional Signs in the CO Campus Overlay District are capped at 8 ft tall and 20 sq ft (Sec. 255-19(M)(6)). Most commercial signs in Lancaster require a permit.

Detailed Sign Ordinance Requirements for Lancaster, Pennsylvania

Sign Rules by Zoning District in Lancaster (12 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones14No taller than 75% of existing building facade (excluding eaves/roof); never over 35 ft.300 sq ft normally; up to 672 sq ft if oriented toward US Rtes 283/30.Not listed
R1, R21Not listedTotal signage not to exceed 20 sq ft.Not listed
R31Not listed24 sq ft total max size per sign.Not listed
R4, RO1Not listed30 sq ft max per signNot listed
PO1Not listed50 sq ftNot listed
MU, C1, C21Not listed50 sq ftNot listed
CB, CB11Not listed50 sq ftNot listed
C3240 ft above street grade to which it is oriented300 sq ft (unless oriented to US 283/30: 672 sq ft)Not listed
HC, DF1Not listed75 sq ftNot listed
CM240 ft max300-672 sq ft (see §255-12D)Not listed
SM240 ft max300-672 sq ft (see §255-12D)Not listed
CO Campus Overlay District48 ft80 sq ftNot listed

Zone-by-Zone Sign Requirements in Lancaster(sample of 3 of 12 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning SignNot listedAdvertising copy/symbols may not exceed 50% of area of awning surface on which it is located.Not listedNot listedNot listedAttached or incorporated into the awning surfaceNot listedUnlock§255-12(B), §255-13(F)
BannerShall not exceed 25 feet above grade; shall not be less than 8 feet above grade.Not listedNot listedNot listedNot listedAffixed to a building wall; if attached to pole/support affixed to building, support must not project more than 4 feet from wall.Not listedUnlock§255-12(C), §255-15(I)
Billboard40 feet above street grade to which it is oriented.300 sq ft normally; up to 672 sq ft if oriented toward US Rtes 283/30.Not listed20' front, 10' secondary front, 12' side, 25' rear.Maximum two faces.Must comply with setbacks: 20 ft from front lot line, 10 ft from secondary front, 12 ft from side, 25 ft from rear. No billboards within 100 ft of residential district.Not listedUnlock§255-12(D)
Freestanding Sign (Residential Districts)6 ft in residential districts.Not listedNot listed5' side/rear, 3' frontNot listedNot in public right-of-way, not in sight triangle.Not listedUnlock§255-12(E)
Freestanding Sign (C2, C3, SM Districts)Varies by setback: 3-5 ft setback max 10', 6' setback max 13', 7' setback max 16', 8' setback max 19', 9' setback max 22', 10' setback max 25'Not listedNot listedSee height tableNot listedNot in public right-of-way or sight triangle.Not listedUnlock§255-12(E)
Freestanding Sign (Other Nonresidential Districts)3-5' setback: 10'; 6': 13'; 7' or more: 16'Not listedNot listedSee height tableNot listedNot listedNot listedUnlock§255-12(E)
Sidewalk Sign (Near Curb)Max 36"Not listedMax 24"Not listedNot listedOn sidewalk in front of advertised businessNot listedUnlock§255-12(I)
Sidewalk Sign (Near Property Line)Max 60"Not listedMax 42"Not listedNot listedOn sidewalk, adjacent to building where steps or building elements project.Not listedUnlock§255-12(I)

C3

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Business/Commercial Advertising Sign (Wall, Projecting, Freestanding, Monument, Roof, Awning, Arcade, Marquee)Not listed100 sq ft (<300' from property line), 200 sq ft (>300')Not listedNot listedNot listedNot listedNot listedUnlock§255-19(I)
Billboard40 ft above street grade to which it is oriented300 sq ft (unless oriented to US 283/30: 672 sq ft)Not listed20' front, 10' secondary front, 12' side, 25' rear; 400 ft to next billboard, 100 ft from residential.Max two faces per structure.Setback as per §255-12(D)Not listedUnlock§255-12(D), §255-19(C)

CO Campus Overlay District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Business Sign (Wall, Projecting, Freestanding, Arcade, Awning, Marquee, Roof)Not listed75 sq ft (if visible from public street)Not listedNot listedNot listedNot listedNot listedUnlock§255-19(M)
Campus Directional Sign8 ft20 sq ftNot listedNot listed2 per building/locationFreestandingNot listedUnlock§255-19(M)(6)
Campus Identification SignNot listed80 sq ftNot listedNot listedOne per vehicular entrance and one per single pedestrian entranceFreestandingNot listedUnlock§255-19(M)(7), (8)
Campus Identification Sign (Electronic or Internally Illuminated)Not listed80 sq ft per sideNot listedNot listedSee identification sign limitsFreestanding at campus entrance; must be at least 100 ft from a residential district.Not listedUnlock§255-19(M)(8)

PermitPal covers all 12 zoning districts in Lancaster. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Lancaster

  • No sign shall be placed so as to obstruct any window, door, stairway or other opening intended for ingress or egress or which would obstruct ventilation and/or light.
  • No sign, whether illuminated or not, shall be located in a manner which would confuse, interfere with or obstruct the vision or line of vision between a motorist and an official traffic sign or marking or traffic signal.
  • No sign shall violate the corner visibility provisions set forth in the City Zoning Ordinance.
  • No sidewalk sign shall block the flow of pedestrian traffic or create a hazard for persons with disabilities, nor shall a sign be placed at any bus stop, loading zone, or driveway or obstruct corner visibility for drivers.
  • No sidewalk sign shall be fastened or attached in any manner to any tree, utility pole, parking meter, street sign or other structure.
  • No sign, visible from a public street, except a public sign, shall use the word 'stop,' 'danger,' or any other word, phrase, symbol, color, character or representation which could be interpreted by a motorist as being a public safety warning or traffic sign.
  • No revolving beam or beacon of light resembling any emergency vehicle or facility shall be permitted to be erected as part of any sign or window display.
  • Flashing signs or signs with strobe effects shall be prohibited in all districts except that temporary detour or road construction signs may flash warning messages.
  • No flashing, illusionary movement or other form of illuminated sign shall be programmed, illuminated or operated in a fashion that would distract or impair a motorist's ability to see or drive safely.
  • Signs shall not be erected, altered, maintained or used without compliance with the provisions of this chapter and appropriate permits.
  • Internally lit and neon lighting must be UL (Underwriters Laboratory) approved, constructed according to the National Electrical Code, and must be inspected by the City Electrical Inspector prior to being electrified.
  • Freestanding inflatable signs shall not be permitted within 20 feet of any public right-of-way.
  • No flag or banner attached to a freestanding pole shall be placed within, on or upon any sidewalk right-of-way, except for a governmental flag or banner.
  • No flag or banner shall be attached to any tree, utility pole, sign post or other structure within the sidewalk right-of-way.
  • No sign shall be attached to a tree, fence, utility pole or other object not intended for the use as a sign facility unless authorized by the City Engineer or Bureau of Police.
  • Billboards shall not project into any public right-of-way.
  • In residential districts and in the CB and CB1 Districts, no moving sign or display, such as pennants, spinners, tinsel, signs with physically moving elements, or rotating panel signs, shall be permitted. Flags and banners shall be exempt from this provision.
  • No sign shall create glare for motorists; spotlighting of signs must be aimed/shielded to prevent direct visibility to motorists.

Exempt Signs in Lancaster

  • Signs within a building which are obviously intended to be seen primarily from within the building are not considered signs under this chapter.
  • Display of merchandise either behind store windows or outdoors is not considered a sign.
  • Flags and insignia of governments or government agencies or of any civic, educational, or religious organization are not considered signs.
  • National flags, state or municipal flags, or the official flag of any institution shall not be considered banners.
  • Temporary detour or road construction signs may flash warning messages, even where flashing signs are otherwise prohibited.
  • Customary holiday decorations may use exterior neon tubing, strings of lights or other means 30 days prior to and removed not later than 21 days after the holiday.
  • Public signs, such as official highway route number signs, street name signs, and other official directional and traffic signs erected in the interest of public safety or for traffic regulation are allowed in all districts without permits.
  • Signs identifying points of historical interest in accordance with size and location limitations may be exempt from permits.
  • Noncommercial signs (personal, political, religious, or social expression not advertising a product or service), provided no internal illumination and total area does not exceed 12 sq ft, are allowed in all districts without permits.
  • Identification signs for residential and related uses, within specific size limits, are exempt from permits.
  • Temporary business or advertising signs and temporary public signs, meeting certain size and placement criteria, may be allowed in all districts without permits.

Sign Plan & Submission Notes for Lancaster

  • All signs require a sign permit unless specifically exempted; the permit application must be completed by the installer or property owner/occupant prior to installation.
  • A separate building permit may be required for electrical signs, structural or combustible signs, in addition to a sign permit.
  • Design review by HARB and a certificate of appropriateness by City Council is required prior to the issuance of any sign permit for signs located within the City of Lancaster Historic District.
  • Design review and approval by the Sign Commission is required before a sign permit is issued for signs in the CB and CB1 Districts (excluding the Historic District), except those permitted by right under § 255-17.
  • The Sign Administrator may grant limited modifications (up to 25% increase in size), and the Sign Commission may grant broader modifications or hear appeals regarding sign requests.
  • Appeals from any decision of the Sign Commission may be taken to the Court of Common Pleas in accordance with state law.
  • For modifications of sign regulations (variance-type requests), review and approval by the Sign Administrator or Sign Commission is explicitly required.
  • In nonconformance or for historic signs, additional review by the Historic Preservation Specialist or as otherwise required may be necessary.
  • The maximum sign sizes and types permitted vary by zoning district, and a master sign plan is not explicitly required by this text, but compliance with district regulations and approval by relevant bodies is required.

Source: ecode360 municipal code