Sign Regulations in Malvern Borough, Pennsylvania

Malvern Borough, Pennsylvania has specific sign regulations covering 29 sign types across 3 zoning districts. Regulated sign types include Banner (Community/Charitable Event), Freestanding Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Malvern Borough, Pennsylvania

Sample Sign Requirements in Malvern Borough

Sign TypeMax HeightMax AreaSetback
Freestanding Sign20 feet above average ground level (6 feet for masonry freestanding signs)
Digital Sign (Non-billboard)8 square feet of display area
Governmental Sign8 square feet per side

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Malvern BoroughFull Coverage

Sign Types Covered

29

  • Banner (Community/Charitable Event)
  • Freestanding Sign
  • Projecting Sign
  • Awning/Canopy Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Malvern Borough

Frequently Asked Questions

In Malvern Borough, monument signs are limited to 20 feet above average ground level (6 feet for masonry freestanding signs). Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Malvern Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Malvern Borough, regulated sign types include Banner (Community/Charitable Event), Freestanding Sign, Projecting Sign, Awning/Canopy Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Malvern Borough vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Malvern Borough are regulated with specific requirements for brightness, animation, and message duration. Malvern Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Malvern Borough Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Malvern Borough, Pennsylvania sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Malvern Borough, Pennsylvania Sign Rules at a Glance

Malvern Borough, Pennsylvania regulates 29 sign types across 3 zoning districts. Billboards in the Commercial Districts, Commercial Zoning District, Industrial Districts, Limited Industrial District (LI, LI-1) zoning district are capped at 22 feet above natural grade tall and 300 sq ft, single-faced, with a 50 ft from street right-of-way; 30 ft from other boundaries setback (Sec. § 220-2604.1B-J). Most commercial signs in Malvern Borough require a permit.

Detailed Sign Ordinance Requirements for Malvern Borough, Pennsylvania

Sign Rules by Zoning District in Malvern Borough (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones620 feet above average ground level (6 feet for masonry freestanding signs)8 square feet of display area
Residential Districts12100 square inches
Commercial Districts, Commercial Zoning District, Industrial Districts, Limited Industrial District (LI, LI-1)1122 feet above natural grade300 sq ft, single-faced

Zone-by-Zone Sign Requirements in Malvern Borough

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Banner (Community/Charitable Event)Across streets, alleys, and public rights-of-wayUnlock§ 220-2603A(7)
Freestanding Sign20 feet above average ground level (6 feet for masonry freestanding signs)Unlock§ 220-2603A(8)-(9)
Projecting SignMay project over public walkway; not more than 4.5 feet projectionUnlock§ 220-2603A(10), (5)(h)
Awning/Canopy SignAffixed to awning/canopy over sidewalkUnlock§ 220-2603A(11)
Dispensing Machine (Soda/Candy) SignOutside of buildingUnlock§ 220-2603A(12)
Digital Sign (Non-billboard)8 square feet of display areaCommercial Zoning District onlyUnlock§ 220-2603B(2)-(6)

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Governmental Sign8 square feet per side1 per street frontageUnlock§ 220-2604A(2)
Institutional Sign6 square feet per 100 feet of street frontage, or 18 sf min1 per street frontageOn same lot as institutionUnlock§ 220-2604A(3)
Temporary Sign (Sale/Rental)6 sq ft (lot ≤2 acres); 8 sq ft (lot >2 acres); 5 sq ft (if <100 ft frontage)1 per frontageOn lot advertisedUnlock§ 220-2604A(4)(a)
Temporary Sign (Subdivision, 5-10 lots)16 sq ft per side1 per subdivisionWithin the subdivisionUnlock§ 220-2604A(4)(b)
Temporary Sign (Subdivision, 11+ lots)24 sq ft per side1 per 200 ft of road frontageWithin the subdivisionUnlock§ 220-2604A(4)(c)
Temporary (Seasonal) Agricultural Product Sign8 sq ft per side2On property where products are produced/soldUnlock§ 220-2604A(4)(e)
Temporary Sign (Contractor/Mechanic/Artisan/Lender)8 sq ft1 per propertyOn premises where work is being performedUnlock§ 220-2604A(4)(g)
Name Sign (Dwelling)100 square inches1 per dwellingOn same lot as dwellingUnlock§ 220-2604A(6)

Commercial Districts, Commercial Zoning District, Industrial Districts, Limited Industrial District (LI, LI-1)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Bed-and-Breakfast/Tourist Home/Rooming House Sign6 sq ft per side1 per street frontageOn premisesUnlock§ 220-2604B(2)
Business/Commercial Sign (Single Principal Use)36 sq ft (total per frontage); 25 sq ft (single-sided sign)On same property as useUnlock§ 220-2604B(3)
Business/Commercial Sign (Multiple Principal Uses)40 sq ft (total per street frontage); per use: not more than 36 sq ft or 10% wall areaOn property of useUnlock§ 220-2604B(3)
Industrial SignUp to 40 sq ft per use per street frontage; otherwise: 36 sq ft or 10% of wall areaOn same property as useUnlock§ 220-2604B(4)
Multishop Retail Freestanding Sign32 sq ft per side1 per road frontage of at least 200 ftFreestanding, for unified developments with 3+ uses, single lot, 200+ ft frontageUnlock§ 220-2604B(5)
Permanent Window SignMax 50% per window; not more than 50% of total window area of the premisesAffixed/hung/painted on windowUnlock§ 220-2604B(6)
Automobile Gas Station Accessory Signs30 sq ft (total), no more than 5 signs5At automobile gas stationUnlock§ 220-2604B(7)
Billboard22 feet above natural grade300 sq ft, single-faced50 ft from street right-of-way; 30 ft from other boundariesLI and LI-1 Zoning Districts only, not within 1000 ft of another billboard or within 200 ft of any residential use (300 ft if illuminated/digital)Unlock§ 220-2604.1B-J

Illumination rules, size formulas, and permit requirements for every sign type in Malvern Borough are available with a free PermitPal account.

Start free

Prohibited Signs in Malvern Borough

  • No sign shall be altered, rebuilt, enlarged, expanded or relocated, except in conformance with this article.
  • No nonconforming sign may be expanded, rebuilt, replaced or changed, except to make it a conforming sign.
  • No spinning, animated, twirling or moving signs.
  • No sign on a mobile stand.
  • No floating blimp, other hot-inflated signs, or cold-inflated signs.
  • No blinking, flashing signs, or klieg-type lights are permitted.
  • Billboards or other such outdoor advertising signs not located on the same lot as the primary associated use, except as may be allowed under § 220-2604C by special exception.
  • No sign may be attached to a utility pole, tree, or other plant.
  • No sign or sign structure shall project above the building height restriction in the district or above the height of a building to which it is affixed.
  • No sign shall be placed or painted on any roof of any building or any structure or architectural detail designed to look like a roof.
  • No sign may be placed or painted on a public bench.
  • A truck, van, or trailer with a sign on it must be parked so as to minimize its use as an advertisement for a use, service or commodity, on the premises, to persons in vehicles on a public street. No such vehicle or trailer shall be parked in an area which is not a paved parking space. No unlicensed, uninspected or unregistered vehicle or trailer may be used as a sign visible from a public street.
  • No signs shall be placed or maintained in a position that interferes with traffic or pedestrian safety. The sign shall not obstruct or interfere with the view of any official street sign or signal, the street and/or driveways entering any street or pedestrian ways. No sign shall in any way interfere with the minimum sight distances which would be required for any street or driveway if the street was a state road of the same type, or if the street entered by a driveway was a state road of the same type.
  • No sign, other than official street signs, shall be erected or maintained within the street right-of-way, unless a building is located closer and the sign is mounted flush with the building.
  • No sign or sign structure shall project more than 4.5 feet over a public walkway and the lower edge of such projecting sign and/or sign structure shall not be less than eight feet above the level of such walkway.
  • The source of lighting for an illuminated sign shall not be directly visible from any street, alley or walkway, nor from any window of a residential building.
  • No internally illuminated signs are permitted, except for certain specifically allowed sign types.
  • No direct rays from lights intended to externally illuminate illuminated signs shall be projected to areas other than the sign.
  • No sign shall be illuminated, except between dusk and the time when the business or activity closes, or 11:00 p.m. prevailing time, whichever is later.
  • Banners to promote business or other commercial enterprises are prohibited.
  • No freestanding sign shall be higher than 20 feet above average ground level, except that the top of any masonry freestanding sign shall not exceed six feet above average grade level.
  • All projecting signs shall be rigidly attached to the building and to all supporting and framing structures, attachments and hardware.
  • No portion of any canopy or awning sign shall be lower than eight feet above the level of any sidewalk.
  • No soda machine or candy machine or similar dispensing machine located outside of a building shall be internally lighted.

Exempt Signs in Malvern Borough

  • Regular maintenance of the sign, including electrical, repainting, or cleaning of a sign does not require a permit.
  • Repair of a sign that does not change it from the original approved application does not require a permit.
  • Minor changes to a sign, such as phone number or contact information changes deemed insignificant by the Borough Zoning Officer, do not require a permit.
  • Governmental and official signs do not require a permit.
  • Informational signs (such as 'entrance', 'exit', 'no parking', etc.) do not require a permit, provided they are on the same lot as the use to which they relate, do not exceed two square feet, and do not contain advertising.
  • Address signs do not require a permit, provided they do not exceed 108 square inches and only one is placed for each street frontage with an entrance.
  • No trespassing and private ownership signs do not require a permit, provided the side area does not exceed two square feet, are outside the street right-of-way and at least eight feet from cartway, and spaced at intervals of not less than 100 feet along the street frontage.
  • Temporary yard signs for events such as yard or garage sales do not require a permit, provided they are not greater than two square feet, only one on-site sign per use, removed within 24 hours after the event, and no more than four off-premises signs placed with property owner approval.
  • Temporary window signs made of paper or other temporary material used as an accessory sign for a principal commercial or retail use do not require a permit (with size and duration limitations specified).

Sign Plan & Submission Notes for Malvern Borough

  • Applications for commercial and industrial signs require a scaled drawing of the sign, materials and colors, and exact location.
  • For signs mounted on buildings, the application must include a scaled drawing of the building facade showing sign location, support structure, and identification of colors and materials of the building.
  • For freestanding signs, a scaled plot plan is required showing the location of the sign on the property, improvements on the site, drawing of the sign support structure, and any landscaping.
  • All applications for signs with an area of 20 square feet or more on any side must include a landscaping plan around the base of the support structure.
  • For multishop retail signs, a sign permit application for all signs (individual establishments and the freestanding sign) must accompany the subdivision and land development plan, or be submitted to the Borough Zoning Officer as a new submission for sign permits. Application must include the location, orientation, and a scaled drawing of all signs on a plan submitted as part of the review process, show compatibility with overall design, and be signed by the primary owner/officer of each business. Written consent for Borough inspection and a maintenance plan for the freestanding sign must accompany the application.
  • A sign permit is required for all signs except as specified under exemptions.
  • Any required fee must accompany the application.
  • No sign shall be changed in any way from that shown on the approved application, unless and until a new permit authorizing the change is issued.
  • Banners require a permit application to the Zoning Officer at least 15 working days before hanging.

Source: ecode360 municipal code