Questions? Call us at (262) 218-2915

Sign Regulations in Millersville Borough, Pennsylvania

Millersville Borough, Pennsylvania has specific sign regulations covering 12 sign types across 1 zoning districts. Regulated sign types include Building Sign, Wall Sign, Roof Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Millersville Borough, Pennsylvania

Sample Sign Requirements in Millersville Borough

Sign TypeMax HeightMax AreaSetback
Wall SignMay not extend higher than the top of the wall.Not listedNot listed
Roof SignMay extend no more than 5 feet above the lowest point of attachment, and may not extend above highest point of roof.Not listedNot listed
Freestanding SignControlled by regulations in Table 1 and Table 2.Not listedNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Millersville BoroughPartial Coverage

Sign Types Covered

12

  • Building Sign
  • Wall Sign
  • Roof Sign
  • Freestanding Sign
  • +2 more types

Zoning Districts

1

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions

Official Resources for Millersville Borough

Municipal Code1 permit application link available

Frequently Asked Questions

This page doesn't give a single height number for signs in Millersville Borough. The tables on this page quote the ordinance's height rules for the sign types we sampled. For example, the height rule for Wall Sign reads: May not extend higher than the top of the wall. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Millersville Borough require a permit. From the submission notes on this page: Sign permit application requirements, such as forms, plans, and fees, shall be established by the Borough Council. Run a code check for an exact address to see the permit requirements for that zone.

Millersville Borough's sign code covers 12 sign types, including Building Sign, Wall Sign, Roof Sign, and Freestanding Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Government signs do not require sign permits. The full list is on this page.

We haven't published Millersville Borough's sign setback rules on this page yet. Run a code check for an exact address to see them.

Rules in Millersville Borough's sign ordinance that cover digital, changing, or flashing signs: No animated, sequential, intermittent, flashing, rotating, or oscillating signs shall be permitted, except for time-and-temperature signs. Run a code check for an exact address to see the rules for that zone.

AI-Powered Research

Ready to Research Millersville Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Millersville Borough, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Millersville Borough, Pennsylvania Sign Rules at a Glance

Millersville Borough, Pennsylvania regulates 12 sign types across 1 zoning district. Incidental Signs are capped at 2 sq ft. Most commercial signs in Millersville Borough require a permit.

Detailed Sign Ordinance Requirements for Millersville Borough, Pennsylvania

Sign Rules by Zoning District in Millersville Borough (1 zone)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones12May extend no more than 5 feet above the lowest point of attachment, and may not extend above highest point of roof.35 sq. ft. (in addition to US and Pennsylvania flags)Not listed

Zone-by-Zone Sign Requirements in Millersville Borough

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Building SignNot listedNot listedNot listedNot listedNot listedAttached to or painted on a building, including wall or roof, or on awning projecting up to 48 inches.Not listedUnlock§ 380-49 (Definition), § 380-52A-B
Wall SignMay not extend higher than the top of the wall.Not listedNot listedNot listedNot listedAttached to or painted on the wall of a building.Not listedUnlock§ 380-49 (Definition), § 380-50B(2), § 380-52A-B
Roof SignMay extend no more than 5 feet above the lowest point of attachment, and may not extend above highest point of roof.Not listedNot listedNot listedNot listedAttached to or painted on a roof.Not listedUnlock§ 380-49 (Definition), § 380-50B(3), § 380-52A-B
Freestanding SignControlled by regulations in Table 1 and Table 2.Not listedNot listedNot listedNot listedNot attached to or painted on a building.Not listedUnlock§ 380-49 (Definition), § 380-50B(1), § 380-51A(11), § 380-52A-B
Overhead SignNot listedNot listedNot listedNot listedNot listedLocated so pedestrian or vehicular traffic might pass beneath.Not listedUnlock§ 380-49 (Definition), § 380-51A(14)
Projecting SignNot listedNot listedNot listedNot listedNot listedExtends perpendicular outward from the front of a building, possibly over a sidewalk.Not listedUnlock§ 380-49 (Definition), § 380-51A(15),(16)
Incidental SignNot listed2 sq. ft.Not listedNot listedNot listedOn-premises informational signage.Not listedUnlock§ 380-49 (Definition)
FlagNot listed35 sq. ft. (in addition to US and Pennsylvania flags)Not listedNot listed1 flagOn each principal institutional, commercial, or industrial property.Not listedUnlock§ 380-51A(23)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Millersville Borough with a free PermitPal account.

Run a free code check

Prohibited Signs in Millersville Borough

  • No temporary signs shall be permitted, except as authorized elsewhere in this article.
  • No sign shall be located within a street right-of-way, except a government sign, a public utility sign, a sidewalk sign, a nonprofit organization sign, or another sign approved by the Borough Council or the State Department of Transportation.
  • No signs, except official signs, shall obstruct the required clear sight triangle or otherwise cause a significant sight obstruction to oncoming vehicle traffic.
  • No signs shall be painted, pasted, nailed, stapled, or otherwise attached to utility poles, trees, fences, fire hydrants, or in an unauthorized manner to walls or other signs, except insofar as such signs comply with generally applicable rules, regulations, or policies formally adopted by the Borough Council.
  • No sign shall be placed so as to obstruct any door, stairway, window, fire escape, or other means of egress or ingress.
  • No sign shall be placed so as to obstruct ventilation or light from a building.
  • No overhead sign shall have a clearance of less than eight feet between any pedestrian walk and the lowest part of the sign and less than 17.5 feet between any roadway and the lowest part of the sign.
  • No sign that is parallel to and attached to the face of a building shall project more than 18 inches over a public sidewalk.
  • No sign that is perpendicular to and attached to the face of a building shall project more than 48 inches from the building.
  • No sign shall have lights or other illuminating devices that constitute a public safety or traffic hazard.
  • No sign shall be permitted that imitates or that might be confused with an official traffic sign or signal, such as by containing the words 'stop' or 'danger' or by including red, green, or yellow lights.
  • No sign or window display shall include a revolving beam or beacon of light resembling an emergency vehicle or facility.
  • No sign shall advertise activities or products that are illegal under federal, state, or local municipal laws or regulations.
  • No sign visible from outside of a building shall include statements, displays, words, or pictures that are vulgar, obscene, or pornographic.
  • No streamers, pennants, spinners, reflectors, ribbons, tinsel, balloons or similar materials shall be displayed outside a building, except as provided for banners used as special events signs.
  • No animated, sequential, intermittent, flashing, rotating, or oscillating signs shall be permitted, except for time-and-temperature signs.
  • No sign shall emit smoke, visible vapors, particles, sound, or odor.
  • No sign shall be placed on an automobile, truck, or other vehicle if that vehicle is being used primarily for displaying such sign.
  • No inflatable signs shall be permitted.
  • No open flames shall be permitted as part of a sign or in any other way to attract attention.
  • No lighting shall be permitted to outline buildings or structures or parts thereof through the use of exposed neon tubing, strings of lights, or other means, with the exception of customary holiday decorations between November 9th and January 6th.
  • Business signs in other than commercial and industrial districts shall not be illuminated when the business is closed.
  • All electrically illuminated signs shall be constructed to the standards/listing of the latest edition of the National Electrical Code.

Exempt Signs in Millersville Borough

  • Government signs do not require sign permits.
  • Any sign that has been authenticated as historically significant and accurate for its specific location, whether original or a replica, may be exempted from the regulations of this article as a special exception.
  • The area taken up by the address (street number) does not count as part of the sign area.
  • Flags of the United States and Pennsylvania are allowed in addition to one flag not to exceed 35 sq ft per principal institutional, commercial or industrial property.
  • Customary holiday decorations between November 9th and January 6th are exempt from lighting outline prohibition.

Sign Plan & Submission Notes for Millersville Borough

  • Sign permit application requirements, such as forms, plans, and fees, shall be established by the Borough Council.
  • Sign permits are required for all signs listed in Table 1 (permanent signs), except government signs.
  • No permit is required for signs listed in Table 2 (temporary signs).
  • Sign permitting procedures and plan requirements (forms, plans etc.) are to be determined by the Borough Council and referenced in permit application requirements.

Source: ecode360 municipal code