Sign Regulations in Parkside Borough, Pennsylvania
Parkside Borough, Pennsylvania has specific sign regulations covering 19 sign types across 6 zoning districts. Regulated sign types include Nameplate Sign, Identification Sign (Apartment/School/Church), Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Sign Regulation Overview for Parkside Borough, Pennsylvania
Sample Sign Requirements in Parkside Borough
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Portable Sign | — | 6 square feet per display face | — |
| Nameplate Sign | — | 108 square inches | — |
| Identification Sign (for apartments, schools, churches, hospitals, and similar permitted uses, excluding individual dwellings) | Freestanding/ground: 4 feet | 15 square feet | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
19
- Nameplate Sign
- Identification Sign (Apartment/School/Church)
- Wall Sign
- Awning Sign
- +2 more types
Zoning Districts
6
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Parkside Borough
Other Cities in Pennsylvania
Frequently Asked Questions
Sign height limits in Parkside Borough vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Parkside Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Parkside Borough, regulated sign types include Nameplate Sign, Identification Sign (Apartment/School/Church), Wall Sign, Awning Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Parkside Borough vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Parkside Borough are regulated with specific requirements for brightness, animation, and message duration. Parkside Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Parkside Borough Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Parkside Borough, Pennsylvania — with citations from the municipal code.
No credit card required · Get results in seconds
Parkside Borough, Pennsylvania Sign Rules at a Glance
Parkside Borough, Pennsylvania regulates 19 sign types across 6 zoning districts. Billboards in the C-2 Commercial District zoning district are capped at 20 feet above maximum allowed building height tall and 100 square feet, with a Minimum 35 feet from street right-of-way setback (Sec. §182-87 A-N). Most commercial signs in Parkside Borough require a permit.
Detailed Sign Ordinance Requirements for Parkside Borough, Pennsylvania
Sign Rules by Zoning District in Parkside Borough (6 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Business District | 1 | — | 6 square feet per display face | — |
| Residential District (R-1, R-2, RM) | 5 | Freestanding/ground: 4 feet | 108 square inches | — |
| C-1 Commercial District | 7 | Freestanding/ground: 4 feet | 108 square inches | — |
| C-2 Commercial District | 8 | 20 feet above maximum allowed building height | 108 square inches | — |
| OS Open Space District | 2 | — | 20 square feet | — |
| General Regulations For All Zones | 3 | — | 50% of area affixed to (door/window/wall) | — |
Zone-by-Zone Sign Requirements in Parkside Borough(sample of 3 of 6 zones)
Residential District (R-1, R-2, RM)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Nameplate Sign | — | 108 square inches | — | — | 1 per dwelling | — | — | Unlock | §182-86A(1) |
| Identification Sign (for apartments, schools, churches, hospitals, and similar permitted uses, excluding individual dwellings) | Freestanding/ground: 4 feet | 15 square feet | — | — | One wall sign and one freestanding/ground sign per frontage | — | — | Unlock | §182-86A(2) |
| Identification Sign (Nonconforming Nonresidential Uses) | Freestanding/ground: 4 feet | 15 square feet | — | — | One wall sign and one freestanding/ground sign per frontage | — | — | Unlock | §182-86A(3) |
| Home Occupation/Professional Office Accessory Sign | — | 6 square feet | — | — | 1 per property | — | — | Unlock | §182-86A(4) |
| Illuminated Sign (except nonconforming nonresidential use) | — | — | — | — | — | — | — | Unlock | §182-86A(5) |
C-1 Commercial District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Nameplate Sign | — | 108 square inches | — | — | 1 per dwelling | — | — | Unlock | §182-86B(1), §182-86A(1) |
| Identification Sign (Apartment/School/Church) | Freestanding/ground: 4 feet | 15 square feet | — | — | Max one wall and one free/ground sign per frontage | — | — | Unlock | §182-86B(1), §182-86A(2) |
| Wall Sign | — | 25 square feet | — | — | — | On building wall | — | Unlock | §182-86B(2), (3)(a) |
| Awning Sign | — | 25 square feet | — | — | — | On awning | — | Unlock | §182-86B(3)(a) |
| Freestanding Sign (Ground/Pole) | — | 16 square feet | — | — | — | — | — | Unlock | §182-86B(3)(b) |
| Projecting Sign | — | 10 square feet | — | — | — | — | — | Unlock | §182-86B(3)(c), §182-84B |
| Canopy Sign | — | 15 square feet | — | — | — | On canopy | — | Unlock | §182-86B(3)(d) |
C-2 Commercial District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Nameplate Sign | — | 108 square inches | — | — | 1 per dwelling | — | — | Unlock | §182-86C(1), §182-86A(1) |
| Identification Sign (Apartment/School/Church) | Freestanding/ground: 4 feet | 15 square feet | — | — | Max one wall and one freestanding/ground sign per frontage | — | — | Unlock | §182-86C(1), §182-86A(2) |
| Wall Sign | — | 30 square feet | — | — | — | On building wall | — | Unlock | §182-86C(3)(a) |
| Awning Sign | — | 30 square feet | — | — | — | On awning | — | Unlock | §182-86C(3)(a) |
| Freestanding Sign (Ground or Pole) | — | 24 square feet | — | — | — | — | — | Unlock | §182-86C(3)(b) |
| Projecting Sign | — | 15 square feet | — | — | — | — | — | Unlock | §182-86C(3)(c), §182-84B |
| Canopy Sign | — | 20 square feet | — | — | — | On canopy | — | Unlock | §182-86C(3)(d) |
| Billboard | 20 feet above maximum allowed building height | 100 square feet | — | Minimum 35 feet from street right-of-way | 1 per lot | Freestanding only | — | Unlock | §182-87 A-N |
PermitPal covers all 6 zoning districts in Parkside Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements — illumination rules, size formulas, and permit requirements for every sign type — with a free account.
Run a code check for your exact address — freeProhibited Signs in Parkside Borough
- No flashing, blinking, twinkling, spinning, animated, inflatable, aerial, crane, or lighted moving signs, including automatic color changing and rotating lamps and other moving objects that call attention to the sign.
- No advertising cloth or paper banner or signs of any similar character suspended or hung on any property, except for temporary banners. (Banners and pennants for public purposes only permitted in the C-1 and C-2 Commercial Districts.)
- No wall bulletins or signs painted directly on the facade of a building or other structure.
- No curb or sidewalk signs or signs painted, attached, or suspended from any outdoor bench, chair, or similar structure.
- No swinging and hanging signs.
- No signs, letters, posters, and advertisements tacked, pasted, tied or otherwise affixed to poles, posts, buildings, fences, or other structures located on public property or within public rights-of-way.
- No signs placed, inscribed, or supported upon the roofline or any structure that extends above the roofline of any building.
- No digital movable billboard signs.
- No sign shall be located, arranged, or placed so as to cause danger to traffic, interfere with traffic through glare, block required sight lines for streets, sidewalks, or driveways, cause confusion with a traffic control device by reason of color, location, shape, or other characteristics, or cause confusion through any other means.
- No sign shall be erected within the right-of-way lines of any public street except in the C-1 and C-2 Commercial Districts, nor shall any such sign be closer than six feet to the right-of-way line of a public street, unless specifically authorized by other ordinances and regulations or other governmental bodies.
- No illuminated sign shall be lighted on days when the business or permitted use is not open.
- Except for traffic signs, incidental signs, and billboards, all permanent signs shall be located on the property to which their text or message applies.
- All signs must comply, where applicable, with the Pennsylvania Uniform Construction Code and Pennsylvania Department of Transportation requirements.
- Every sign must be constructed of durable materials and kept in good condition and repair; dilapidated signs must be removed by the landowner or lessee.
- Freestanding signs, wall signs, canopy signs, and awning signs must have a clearance of not less than eight feet between the ground and the bottom of the sign.
- Temporary commercial advertising signs shall not be attached to fences.
- No sign shall obstruct vehicular or pedestrian traffic, block access to or from any door, window, fire escape, or ventilating equipment, nor be attached to any standpipe or fire escape.
Exempt Signs in Parkside Borough
- Public notice, warning, or official traffic sign required by a federal, state, or local law, regulation, or ordinance.
- Any sign inside a building not attached to a window or door that is not legible from a distance of more than three feet beyond the lot line.
- Building markers showing only building name, date of construction, or historical data on an historical site (one per building, max area six square feet).
- Flags of the United States, the Commonwealth of Pennsylvania, foreign nations with diplomatic relations with the US, or any other adopted/sanctioned flag (max area 60 sq ft, max pole height 40 ft).
- Incidental signs containing no commercial message, not exceeding eight square feet.
- Signs advertising the sale or rental of the premises or lot (one per street frontage, not illuminated or exceeding six square feet, to be removed on or before settlement date).
- Signs advertising the development of the premises (max six square feet in residential, 32 in nonresidential, to be removed on or before settlement).
- Nameplate signs on private residences (not to exceed 108 square inches).
- Decorations for an officially designated holiday, provided they do not create a traffic or fire hazard.
- Yard sale or garage sale signs (max two square feet, to be removed within 24 hours after sale).
- Signs announcing educational, charitable, civic, religious, or similar campaigns/events (max period 30 days, max four times/year, max annual total 120 days, not to exceed eight square feet; permit required if on telephone poles).
- Changeable copy signs for churches, schools and other uses requiring such signs (max one per property, two if corner property; max size 16 square feet).
- Borough signage erected and maintained for Borough purposes, provided all other required government permits are obtained.
Sign Plan & Submission Notes for Parkside Borough
- There is no express requirement in the text for a 'master sign plan' or formalized 'sign plan' for multi-tenant or large developments, nor is a variance hearing or meeting mentioned as a required general procedure.
- A permit is generally required for all signs unless specifically exempted under §182-85 (see §182-86 and §182-89).
- All permits are applied for via written application, with requirements for details and sketches to be reviewed for compliance by the Zoning Officer.
- Whenever any sign or sign face is replaced, enlarged, altered, dismantled, damaged, or destroyed, a new permit is required before proceeding.
- The Zoning Officer may revoke any issued permit upon failure to comply with any ordinance provision.
- Permit requirements are waived only for signs listed in §182-85 (exempt signs) and certain freestanding, portable signs in the Business District as specified in §155-3.
- Billboards are permitted only in the C-2 District as a use by special exception, which may entail a separate approval process.
Source: ecode360 municipal code