Questions? Call us at (262) 218-2915

Sign Regulations in Plains Township, Pennsylvania

Plains Township, Pennsylvania has specific sign regulations covering 13 sign types across 7 zoning districts. Regulated sign types include Business Sign, Land Development Integrated Sign, Subdivision/Development Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Plains Township, Pennsylvania

Sample Sign Requirements in Plains Township

Sign TypeMax HeightMax AreaSetback
Identification Sign10 ft (freestanding); not higher than first story (wall sign)2 sq ftMin 10 ft from front lot line
Real Estate SignNot listed8 sq ftMin 10 ft from front lot line
Subdivision/Development SignNot listed60 sq ftMin 35 ft from front lot line

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Plains TownshipFull Coverage

Sign Types Covered

13

  • Business Sign
  • Land Development Integrated Sign
  • Subdivision/Development Sign
  • Identification Sign
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions

Frequently Asked Questions

In Plains Township, the height limit for Bench Sign is 18 inches (Sec. 27-1001.I). Maximum sign heights range from 18 inches to 20 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Plains Township require a permit. We haven't published Plains Township's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.

Plains Township's sign code covers 13 sign types, including Business Sign, Land Development Integrated Sign, Subdivision/Development Sign, and Identification Sign. Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Real estate signs and construction signs shall be exempt from securing a zoning permit. The full list is on this page.

In Plains Township, Identification Sign must be set back at least 10 ft from front lot line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Plains Township's sign ordinance that cover digital, changing, or flashing signs: Sequential, flashing or oscillating signs. Run a code check for an exact address to see the rules for that zone.

AI-Powered Research

Ready to Research Plains Township Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Plains Township, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Plains Township, Pennsylvania Sign Rules at a Glance

Plains Township, Pennsylvania regulates 13 sign types across 7 zoning districts. Bench Signs are capped at 18 inches tall, 9 sq ft, and 6 ft wide (Sec. 27-1001.I). Most commercial signs in Plains Township require a permit.

Detailed Sign Ordinance Requirements for Plains Township, Pennsylvania

Sign Rules by Zoning District in Plains Township (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1018 inches60 sq ftNot listed
B-1, C-1220 ft200 sq ftNot listed
B-2220 ft200 sq ftNot listed
B-3, B-4, I-1320 ft300 sq ft per panel, double-faced permittedNot listed
B-5220 ft3200 sq ftNot listed
MU1Not listedNot listedNot listed
PRD1Not listed60 sq ftNot listed

Zone-by-Zone Sign Requirements in Plains Township(sample of 3 of 7 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Identification Sign10 ft (freestanding); not higher than first story (wall sign)2 sq ftNot listedMin 10 ft from front lot lineSee § 27-1005: Not more than 2 per lot, 3 for corner lot (excludes B-4, B-5, MU).Min 10 ft setback from front lot lineNot listedUnlock§ 27-1003.A, § 27-1004.A, § 27-1011
Real Estate SignNot listed8 sq ftNot listedMin 10 ft from front lot lineNot specifiedOn the lot for sale/rental; min 10 ft setback from front lot lineNot listedUnlock§ 27-1003.C, § 27-1004.C, § 27-1011
Subdivision/Development SignNot listed60 sq ftNot listedMin 35 ft from front lot lineMax 1 per subdivisionOn property being sold within subdivision/PRD; min 35 ft setback from front lot lineNot listedUnlock§ 27-1003.D, § 27-1004.D
Construction SignNot listed40 sq ftNot listedNot within nor less than 10 ft from public right-of-wayOne per firm on propertyOn property under construction; not within or less than 10 ft from a public right-of-wayNot listedUnlock§ 27-1001.E, § 27-1004.E, § 27-1011
Institutional SignMax height for principal structure in the district30 sq ftNot listedMin 10 ft from front lot lineNot specifiedMin 10 ft from front lot lineNot listedUnlock§ 27-1003.E, § 27-1004.F, § 27-1011
On-Site Directional and/or Informational Sign6 ft6 sq ftNot listedMin 5 ft from property linesNot specified, exempt from sign counts (§ 27-1005)Front/rear/side yard; min 5 ft setback from property lineNot listedUnlock§ 27-1001.H, § 27-1004.G
Bench Sign18 inches9 sq ft6 ftNot listedNot specifiedWhere benches are locatedNot listedUnlock§ 27-1001.I
Freestanding SignNot listedNot listedNot listedPer abovePer underlying sign type rulesNot attached to a buildingNot listedUnlock§ 27-1002.A, § 27-1006

B-1, C-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Business Sign20 ft50 sq ftNot listedNot listedMax 2 per property, 3 on corner lot; on-site directionals excluded (§ 27-1005)On zoning lot where business occursNot listedUnlock§ 27-1003.B, § 27-1004.B(1)(a)(b), § 27-1004.B(2), § 27-1011
Land Development Integrated Sign20 ft200 sq ftNot listedNot listedMax 1 per integrated groupingOn lot containing integrated grouping of commercial usesNot listedUnlock§ 27-1004.B(2), § 27-1011

B-3, B-4, I-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Business Sign20 ft250 sq ft (B-3, B-4, I-1);Not listedNot listedUnlimited in B-4; otherwise, Max 2 per property, 3 on corner lot (directionals excluded) (§ 27-1005)On zoning lot where business occursNot listedUnlock§ 27-1003.B, § 27-1004.B(1)(d)(e)(g), § 27-1004.B(2), § 27-1011
Land Development Integrated Sign20 ft200 sq ftNot listedNot listedMax 1 per integrated groupingOn lot containing integrated grouping of commercial/industrial usesNot listedUnlock§ 27-1004.B(2), § 27-1011
Billboard or Off-Premises Advertising SignCannot exceed district maximum300 sq ft per panel, double-faced permittedNot listedNot listedNo more than one double-faced per structureMust be 200 ft from any residential structure or residential zoneNot listedUnlock§ 27-1003.G, § 27-1004.H

PermitPal covers all 7 zoning districts in Plains Township. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Plains Township

  • Signs which are located in such a position which endangers vehicular and/or pedestrian traffic by obscuring the site distance.
  • Signs which by design and/or location may be confused with traffic signs or signals.
  • Any sign located in or extending into a public right-of-way, including sidewalk areas, except an official street sign or traffic control sign.
  • Any freestanding or projecting sign within an area bounded by the intersection of two public or private streets, for a distance of 20 feet along the centerline of the right-of-way of such streets from the point of their intersection.
  • Freestanding or projecting signs over any type of public right-of-way, including sidewalk areas.
  • Sequential, flashing or oscillating signs.
  • Signs which due to their construction and/or location would constitute a hazard or a potential danger to the community.

Exempt Signs in Plains Township

  • Real estate signs and construction signs shall be exempt from securing a zoning permit.