Questions? Call us at (262) 218-2915

Sign Regulations in Rankin Borough, Pennsylvania

Rankin Borough, Pennsylvania has specific sign regulations covering 18 sign types across 4 zoning districts. Regulated sign types include Nameplate, Bulletin Sign (Instructional or Directional), Wall Sign (Multiple-Family Dwelling/Authorized Use). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rankin Borough, Pennsylvania

Sample Sign Requirements in Rankin Borough

Sign TypeMax HeightMax AreaSetback
NameplateNot listed2 square feetNot listed
Bulletin Sign (Instructional or Directional)Not listed12 square feetGround signs must be at least 10 feet from the street ROW (where permitted)
Wall Sign (Multiple-Family Dwelling/Authorized Use)Not listed24 square feetNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Rankin BoroughFull Coverage

Sign Types Covered

18

  • Nameplate
  • Bulletin Sign (Instructional or Directional)
  • Wall Sign (Multiple-Family Dwelling/Authorized Use)
  • Ground Sign (Multiple-Family Dwelling/Authorized Use)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rankin Borough

Municipal Code1 permit application link available

Frequently Asked Questions

In Rankin Borough, the height limit for Ground/Pole Sign in the Nonresidential Districts is 20 feet (bottom edge at least 10 feet above ground) (Sec. 27-707(3)(A)-(E)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rankin Borough require a permit. From the submission notes on this page: For multiple occupancy buildings, if the owner permits the allowable square footage to be shared among businesses, guidelines must be developed (regarding size, type, style, color, lighting, and design) and a copy filed with the sign permit application; compliance is a condition of sign permit approval. Run a code check for an exact address to see the permit requirements for that zone.

Rankin Borough's sign code covers 18 sign types, including Nameplate, Bulletin Sign (Instructional or Directional), Wall Sign (Multiple-Family Dwelling/Authorized Use), and Ground Sign (Multiple-Family Dwelling/Authorized Use). Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Address numbering. The full list is on this page.

In Rankin Borough, Identification Sign (No Building on Lot) in the Nonresidential Districts must be set back at least 15 ft from street right-of-way (Sec. 27-707(4)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rankin Borough's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Rankin Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rankin Borough, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Rankin Borough, Pennsylvania Sign Rules at a Glance

Rankin Borough, Pennsylvania regulates 18 sign types across 4 zoning districts. Temporary Signs in the Nonresidential Districts are capped at 32 square feet, set back at least 15 ft from property/right-of-way lines (Sec. 27-707(7)). Most commercial signs in Rankin Borough require a permit.

Detailed Sign Ordinance Requirements for Rankin Borough, Pennsylvania

Sign Rules by Zoning District in Rankin Borough (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts (SFR, MFR)5Not listed24 square feetNot listed
Nonresidential Districts1120 feet (bottom edge at least 10 feet above ground)Up to 150 square feet shared as determined by ownerNot listed
NBC District1Not listed32 square feetNot listed
General Regulations For All Zones120 feet (from grade of roadway); bottom edge max 8 feet above adjacent roadway elevation300 square feet (12x25 feet)Not listed

Zone-by-Zone Sign Requirements in Rankin Borough(sample of 3 of 4 zones)

Residential Districts (SFR, MFR)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
NameplateNot listed2 square feetNot listedNot listed1 per unitPlaced directly against a building wallNot listedUnlock§ 27-706(1), § 27-706(4), § 27-708(3), § 27-708(6)
Bulletin Sign (Instructional or Directional)Not listed12 square feetNot listedGround signs must be at least 10 feet from the street ROW (where permitted)1 per institutionErected upon the premises of an educational, philanthropic or religious institutionNot listedUnlock§ 27-706(2), § 27-706(4)
Wall Sign (Multiple-Family Dwelling/Authorized Use)Not listed24 square feetNot listedNot listed1 per structureOn wall of structure or ground sign (see requirements)Not listedUnlock§ 27-706(6), § 27-706(4)
Ground Sign (Multiple-Family Dwelling/Authorized Use)Not listed24 square feetNot listedAt least 10 feet back from street ROW1 per structureMust be at least 10 feet back from street ROW in MFR districtNot listedUnlock§ 27-706(6), § 27-706(4)
Directional Sign (Residential)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 27-706(7)

Nonresidential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Single Building)Not listedThe greater of 1 sq ft per building frontage (ft) or 150 sq ftNot listedNot listed1 per wall facing frontage (for buildings with multiple frontages; each wall may have one sign of up to max allowable size)Flat against wall; may not extend above roofline, deckline, or gutter lineNot listedUnlock§ 27-707(2)(A)-(E), § 27-708(6)
Wall Sign (Multiple Occupancy Buildings)Not listedUp to 150 square feet shared as determined by ownerNot listedNot listedEach tenant may have a share; distribution by ownerOn wall as per single buildingsNot listedUnlock§ 27-707(2)(C)
Ground/Pole Sign20 feet (bottom edge at least 10 feet above ground)60 square feet per sideNot listedMinimum 15 ft from street ROW, 5 ft from building, 10 ft from side property line (+1 ft per 10 sq ft sign area over 10 sq ft)Not listedMinimum 15 feet from street ROW; minimum 5 feet from any building; minimum 10 feet from any side property lineNot listedUnlock§ 27-707(3)(A)-(E)
Identification Sign (No Building on Lot)Not listed40 square feetNot listedAt least 15 ft from street ROW1 per lotAt least 15 feet back from street ROWNot listedUnlock§ 27-707(4)
Wall PlaqueNot listed3 square feetNot listedNot listedNot listedAffixed to wallNot listedUnlock§ 27-707(5)
Temporary SignNot listed32 square feetNot listedMinimum 15 ft from property/ROW linesNot listedOn same lot as use being advertised; minimum 15 feet from any property or ROW lineNot listedUnlock§ 27-707(7)
Window SignNot listedNo more than 25% of glazing per windowNot listedNot listedNot listedInside window of nonresidential structures onlyNot listedUnlock§ 27-707(8)
Advertising on Awning or CanopyNot listed50% of allowable wall sign areaNot listedNot listedNot listedAffixed to awning or canopyNot listedUnlock§ 27-707(9)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Billboard20 feet (from grade of roadway); bottom edge max 8 feet above adjacent roadway elevation300 square feet (12x25 feet)Not listed300 ft from roadway intersection; 1,200 ft from another billboard (same side of roadway); 600 ft from billboard (opposite side); buffer yard to adjacent lots.Not listedPrincipal use of lot. Portions must be 5,000 sq ft minimum area. Setbacks described below.Not listedUnlock§ 27-709(1)-(17)

PermitPal covers all 4 zoning districts in Rankin Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rankin Borough

  • No sign may be erected, placed, established, painted, created, altered or maintained except in conformance with the standards, procedures, regulations and requirements contained in the ordinance.
  • Signs not expressly permitted by the ordinance are prohibited.
  • Prohibited signs in any zoning district include: flashing, blinking, changing, animated or moving signs (except LED billboards authorized by the ordinance); pennants, flags or streamers; signs advertising a property for sale or rent that lists an improper use of the property; signs that resemble traffic signals or devices; signs containing obscene or pornographic material, including nonrepair of illegal acts of vandalism (graffiti); off-premises signs (other than billboards); roof signs; signs on trees, utility poles, and traffic devices; and signs that are hazardous to public safety.
  • No sign shall be erected in such a manner as to obstruct free and clear vision or at any location where it may interfere with or be confused with any authorized traffic sign, signal or device.
  • No sign established before the effective date of the Chapter shall be altered in any respect or moved unless it is made to conform with the ordinance (except as a safety measure by an authorized public officer).
  • All signs must be securely built, constructed, and erected in compliance with relevant building codes.
  • Illuminated signs must be nonflashing and nonglaring and prevent glare/reflection to the street or adjacent properties; all signs must be nonanimated with no exterior moving parts.
  • Signs may not be located on public property or within public right-of-way, except in conformance with the ordinance requirements. Unauthorized signs are subject to confiscation.
  • Signs that no longer advertise a bona fide business or activity must be removed within 30 days of termination of such business or activity.

Exempt Signs in Rankin Borough

  • Holiday decorations displayed for recognized state and federal holidays.
  • Official notices authorized by a court, public body, or public safety official.
  • Memorial/historical plaques.
  • Memorial signs and tablets when cut into masonry or constructed of bronze or sculptured materials.
  • Flags of a government organization or corporate entity.
  • Signs authorized by the Borough (e.g., street signs, safety control signs, and traffic control signs).
  • Public notice/public warning signs.
  • Auction, garage sale, or yard sale signs.
  • Address numbering.
  • Temporary construction sign only during active construction.
  • Signs placed on public or parks property by authorization of the Borough.
  • Real estate signs which advertise the sale, rental, or lease of the premises upon which the sign is located, with limits (no more than two such signs per property, and not more than one per street frontage).
  • A-Frame (sandwich board) signs on sidewalks (one per premises, not obstructing pedestrian travel, removed each evening, max six square feet per side).
  • Signs announcing candidacy for public office (not on utility poles, must be removed within five days after the relevant election).

Sign Plan & Submission Notes for Rankin Borough

  • A site plan or sketch, drawn to scale, must be submitted to the Zoning Officer with an application for a sign permit, showing the lot, building, and all other structures on the lot in relation to the proposed sign. The submission must include a written description of materials, construction, mounting, information/visual material to be included, illumination details, and photos from each approach.
  • Permit is required for all exterior sign construction, alteration, modification, or moving, unless the sign is exempted.
  • For multiple occupancy buildings, if the owner permits the allowable square footage to be shared among businesses, guidelines must be developed (regarding size, type, style, color, lighting, and design) and a copy filed with the sign permit application; compliance is a condition of sign permit approval.
  • For billboards, a conditional use application is required, containing information, maps, plans, narrative and graphic materials as set forth in the Express Standards and Criteria for Special Exceptions and Conditional Uses.
  • Permit fees must be paid for installation of all signs not exempted.

Source: ecode360 municipal code