Sign Regulations in Hanahan, South Carolina

Hanahan, South Carolina has specific sign regulations covering 13 sign types across 4 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Hanahan, South Carolina

Sample Sign Requirements in Hanahan

Sign TypeMax HeightMax AreaSetback
Wall Sign18 feet above finished grade24 sq ft (or 5% of facade area, whichever is less)
Freestanding Sign7 feet8 sq ft per side, except when no wall signs are on the building: 15 sq ft per side. Institutional uses: 20 sq ft per side.Building served must be set back at least 5 feet.
Projecting SignTop edge no higher than wall (single story) or sill/bottom of 2nd story window (multi-story); clearance from ground at least 7 ft6 sq ft per side

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HanahanFull Coverage

Sign Types Covered

13

  • Wall Sign
  • Freestanding Sign
  • Projecting Sign
  • Awning Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hanahan

Frequently Asked Questions

In Hanahan, wall signs can be up to 18 feet above finished grade and monument signs are limited to 7 feet. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Hanahan, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Hanahan, regulated sign types include Wall Sign, Freestanding Sign, Projecting Sign, Awning Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

In Hanahan, monument signs typically require a Building served must be set back at least 5 feet. setback from property lines. Setbacks may increase near residential zones or intersections. Wall signs attached to buildings generally don't have setback requirements. Use PermitPal for location-specific setback data.

Digital and LED signs in Hanahan are regulated with specific requirements for brightness, animation, and message duration. Hanahan has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Hanahan Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Hanahan, South Carolina sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Hanahan, South Carolina Sign Rules at a Glance

Hanahan, South Carolina regulates 13 sign types across 4 zoning districts. Freestanding Signs in the Conservation/Preservation (CP) zoning district are capped at 7 feet tall and 8 sq ft per side, except when no wall signs are on the building: 15 sq ft per side. Institutional uses: 20 sq ft per side., with a Building served must be set back at least 5 feet. setback (Sec. Sec 8.3.3). Most commercial signs in Hanahan require a permit.

Detailed Sign Ordinance Requirements for Hanahan, South Carolina

Sign Rules by Zoning District in Hanahan (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Conservation/Preservation (CP)718 feet above finished grade24 sq ft (or 5% of facade area, whichever is less)
Single-Family Residential—Low-density (RSL), Single-Family Residential (RS), Single-Family Residential—Moderate-density (RSM), Residential—Manufactured Housing (RT), Multi-Family Residential (RM), Multi-Family Residential-Neighborhood (RM-N), Residential/Office (RO), Town Residential (TR), Planned Development District (PD, Type "A" and Type "B"), Naval Weapons Station Compatibility Overlay Zone (NWS-COZ), Design Control Overlay District718 feet above finished grade24 sq ft (or 5% of facade area, whichever is less)
General Commercial (CG), Industrial (ID), Town Center (TC)9Up to 20 feet on arterial highway (see 8.4); 7 feet pedestrian.Depends on signage location: up to 75 sq ft if on arterial highway in ID, 20 sq ft on pedestrian.
General Regulations For All Zones332 sq ft (1 side)

Zone-by-Zone Sign Requirements in Hanahan(sample of 3 of 4 zones)

Conservation/Preservation (CP)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign18 feet above finished grade24 sq ft (or 5% of facade area, whichever is less)Max 3 total, includes wall, awning, window, projecting, freestanding. See 8.6(A).Directly attached to exterior wall, not on windows or doorsUnlockSec 8.3.1, Sec 8.2.1, Sec 8.3.9
Freestanding Sign7 feet8 sq ft per side, except when no wall signs are on the building: 15 sq ft per side. Institutional uses: 20 sq ft per side.Building served must be set back at least 5 feet.Max 1 per building except as per 8.6.Building must be set back at least 5 feet; sign must be ground-mounted.UnlockSec 8.3.3
Projecting SignTop edge no higher than wall (single story) or sill/bottom of 2nd story window (multi-story); clearance from ground at least 7 ft6 sq ft per side3 feetMax 3 total (all included sign types), See 8.6(A)Affixed to building frontUnlockSec 8.3.2
Awning Sign8 sq ft on the awningSee max total under 8.6(A)Attached to building over window or doorUnlockSec 8.3.4
Window Sign4 sq ftUp to 3 total (wall, awning, window, projecting, freestanding). See 8.6Inside or within 2 feet of window, viewable from exteriorUnlockSec 8.3.5
Sidewalk Sign (Sandwich Board)6 sq ft per side1 per building (not counted towards 3 sign max, see 8.6)On sidewalk in front of business; must leave at least 4 feet sidewalk clearance, may be in right-of-way, must not block access/vision.UnlockSec 8.3.6
Changeable Copy Sign (Institutional Use)7 feet8–20 sq ft per side depending on sign type and use.Same as freestanding signs.Max 1 per parcel (located for institutional use).Free-standing sign for institutional uses (schools, churches, public).UnlockSec 8.3.7

Single-Family Residential—Low-density (RSL), Single-Family Residential (RS), Single-Family Residential—Moderate-density (RSM), Residential—Manufactured Housing (RT), Multi-Family Residential (RM), Multi-Family Residential-Neighborhood (RM-N), Residential/Office (RO), Town Residential (TR), Planned Development District (PD, Type "A" and Type "B"), Naval Weapons Station Compatibility Overlay Zone (NWS-COZ), Design Control Overlay District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign18 feet above finished grade24 sq ft (or 5% of facade area, whichever is less)Max 3 total (see 8.6).Directly attached to exterior wall, not on windows or doorsUnlockSec 8.3.1, 8.3.9, 8.2.1, 8.6
Freestanding Sign7 feet8 sq ft per side, or 15 sq ft per side if no wall sign; institutional uses: 20 sq ft per side.Building must be set back at least 5 ft.Max 1 per building/parcel.Building must be set back at least 5 feet.UnlockSec 8.3.3
Projecting SignSame as in CP zone6 sq ft per side3 feetIncluded in max 3.Front of buildingUnlockSec 8.3.2
Awning Sign8 sq ftAttached to building over window or doorUnlockSec 8.3.4
Window Sign4 sq ft / 2 sq ft on doorIn/from window viewUnlockSec 8.3.5
Sidewalk Sign (Sandwich Board)6 sq ft per side1 per building/unitFront of business, in right-of-way, provided 4 ft pedestrian clearanceUnlockSec 8.3.6
Changeable Copy Sign (Institutional Use)7 feetUp to 20 sq ft per side if institutionalAs per freestandingInstitutionUnlockSec 8.3.7

General Commercial (CG), Industrial (ID), Town Center (TC)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign18 feet (general); For Town Center: see design standards, max sign area is 5% facade or 24 sq ft.24 sq ftMax 3 incl. all sign types per 8.6On exterior wall, not window/doorUnlockSec 8.3.1, 8.3.9, 8.2.1, 8.6, and for TC: Sec 4.5.12(D)(6a)-(b)
Freestanding Sign7 feet (pedestrian-oriented); 20 feet if on arterial highway (see 8.4); in TC, monument style max 7 feet unless DCC waiver.8 sq ft per side, or 15 sq ft per side if no wall sign; 20 sq ft per side if institution; For TC: Monument signs only, size as per DCC/8.3.3Building served must be set back at least 5 ft (pedestrian-oriented); on highway, 10 ft from R/W.1 per building/parcel except as allowed under 8.6.Ground-mounted; in TC, pole signs prohibited, only monument and wall allowed.UnlockSec 8.3.3, 8.4.1(D)-(F), 4.5.12(D)(6b)
Changeable Copy Sign (in CG/ID/TC)Up to 20 feet on arterial highway (see 8.4); 7 feet pedestrian.Depends on signage location: up to 75 sq ft if on arterial highway in ID, 20 sq ft on pedestrian.Same as freestanding.Freestanding, at institution or business (restrictions for electronic).UnlockSec 8.3.7, 8.4, 4.5.12(D)(6)
Window Sign4 sq ft / 2 sq ft doorWindow or within 2 ft of windowUnlockSec 8.3.5
Projecting SignSee 8.3.26 sq ft per side3 feetAffixed to buildingUnlockSec 8.3.2
Awning Sign8 sq ftOn awningUnlockSec 8.3.4
Sidewalk Sign (Sandwich Board)6 sq ft per side1 per buildingOn sidewalk, in ROW, 4 ft clearanceUnlockSec 8.3.6
Off-Premises Sign (Industrial Only)20 feet75 sq ft per side20 ft from road pavement edge; total height max 20 ft1 per lot, subject to spacingID zone only, at least 20 ft from pavement edge, minimum separation 1000 ft from other off-premises signs.UnlockSec 8.4.2

PermitPal covers all 4 zoning districts in Hanahan — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Hanahan — start free

Prohibited Signs in Hanahan

  • Signs that are dilapidated or in disrepair shall be prohibited.
  • Signs on roofs, chimneys, and balconies shall be prohibited.
  • Signs programmed to flash, blink, or fluctuate the intensity of lights or to operate intermittently so as to create a strobe effect shall be prohibited.
  • Mobile or portable signs shall be prohibited, except sidewalk signs.
  • Signs placed on, painted on, or affixed to vehicles and/or trailers that are parked on public right-of-way, public property so as to be visible from a public right-of-way, and where the apparent purpose is to advertise a product or business, or direct people to a business or activity located on the same or nearby property shall be prohibited except as temporary signage meeting Section 9.6.4.
  • Any sign that emits a sound, odor, or visible matter such as smoke or vapor, including any form of pyrotechnics shall be prohibited.
  • Any sign or sign structure that obstructs the view of, or is operated in any way that could cause it to be confused with, a traffic/directional safety device or public safety vehicle shall be prohibited.
  • Any sign painted on or affixed to trees or other natural features, utility poles, or benches shall be prohibited.
  • Any sign exhibiting statements, words, or pictures that are of an obscene or pornographic nature shall be prohibited.
  • The intensity of light emitted to or from a sign shall not exceed two hundred twenty (220) lux at any point on the sign face.
  • No neon is allowed on freestanding signs.
  • No neon shall be allowed on awnings.
  • No backlit awnings shall be allowed.
  • Wall signs cannot be located on windows or doors.
  • No exposed reflective type bulbs and no strobe/intermittent light or incandescent lamps shall be used to illuminate a sign.
  • Signs exhibiting false or misleading content are prohibited on murals.
  • Freestanding pole-mounted signs and billboards shall be prohibited (in Town Center Districts).
  • Portable signs shall be prohibited, except for sandwich boards with faces no larger than two feet by three feet (in Town Center Districts).

Exempt Signs in Hanahan

  • Signs erected for orderly traffic control and other municipal or governmental purposes will be permitted, including historical monuments, markers, and signs erected by a public authority.
  • Signs advertising agricultural products produced on the premises that do not exceed four square feet in area (one per street abutting the parcel; must be taken down during off-seasons).
  • Temporary civic, cultural, and public service window posters.
  • Temporary promotional or special sales window signs no greater than six square feet in area and posted inside commercial establishments for not more than thirty days.
  • Commercial copy signs on ball fields mounted on outfield fences, facing toward the infield.
  • Flags on residential property.
  • Political signs (if not a visible hazard, not illuminated, no larger than sixteen square feet, posted no sooner than forty-five days prior and removed no later than ten days after election).
  • Real estate signs (subject to size, number, and placement limitations—see Section 8.8(H)).
  • A zoning permit shall not be required for routine maintenance and repair of signs.
  • Minor appearance changes to existing permitted signs, limited to less than twenty percent of the total sign area, including change in text, shall not require a zoning permit.

Sign Plan & Submission Notes for Hanahan

  • A zoning permit is required for the erection, posting, reposting, placing, replacing or hanging of any sign except where specifically noted as exempt.
  • All signs in Design Control Districts for which a zoning permit is required shall be reviewed by the design control committee for compliance with design criteria and standards before a permit for the sign is issued.
  • The zoning administrator may review signage for compliance with standards during site development plan review (Section 2.6), in which case the zoning permit issued for the development would cover the sign.
  • For signage erected independent of a site development for which a zoning permit is required, the review process for the zoning permit applies.
  • Applicants must submit ten copies of a scaled illustration legibly depicting the size and content of the sign and its copy for permit review.
  • A sign permit is not required for those signs specifically listed as exempt in Section 8.8.
  • Monument signs in the Town Center District may be allowed by the design control committee in accordance with Section 8.3.3.
  • All permanent signage in the Town Center District (other than wall or monument signs) must be attached to buildings, except as allowed by the design control committee.
  • A master sign plan is required for Planned Development Districts (Type 'B'); the master plan must include proposed locations and standards for signage, reviewed and adopted as part of the district regulatory provisions.
  • Signage plans/documentation are standard required elements of the site development plan package for all zoning permit applications where signage is proposed.

Source: municode municipal code