Sign Regulations in Mount Pleasant, South Carolina
Mount Pleasant, South Carolina has specific sign regulations covering 21 sign types across 1 zoning districts. Regulated sign types include Freestanding Sign (General Use - Non-Residential Uses), Freestanding Sign (Multi-Tenant Development < 40,000 sq. ft.), Freestanding Sign (Multi-Tenant Development ≥ 40,000 sq. ft.). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: February 10, 2026
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Mount Pleasant, South Carolina
Sample Sign Requirements in Mount Pleasant
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign (General Use - Non-Residential Uses) | 8 ft. | 35 sq. ft. | Minimum 10 ft from curb and/or street right-of-way; must conform to SCDOT Access and Roadside Management Standards Sight Distance Formula. |
| Freestanding Sign (Multi-Tenant Development < 40,000 sq. ft.) | 10 ft. | 50 sq. ft. | Minimum 10 ft from curb and/or street right-of-way; SCDOT sight distance requirements apply. |
| Freestanding Sign (Multi-Tenant Development ≥ 40,000 sq. ft.) | 20 ft. | 150 sq. ft. | Minimum 10 ft from curb and/or street right-of-way; SCDOT sight distance requirements apply. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
21
- Freestanding Sign (General Use - Non-Residential Uses)
- Freestanding Sign (Multi-Tenant Development < 40,000 sq. ft.)
- Freestanding Sign (Multi-Tenant Development ≥ 40,000 sq. ft.)
- Freestanding Sign (US 17/IOP Connector)
- +2 more types
Zoning Districts
1
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Mount Pleasant
Other Cities in South Carolina
Frequently Asked Questions
In Mount Pleasant, the height limit for Freestanding Sign (Multi-Tenant Development ≥ 40,000 sq. ft.) is 20 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Mount Pleasant require a permit. From the submission notes on this page: A master sign program shall be a condition of approval of any planned development, design review, use permit, or other application required by the town for multi-tenant developments. Run a code check for an exact address to see the permit requirements for that zone.
Mount Pleasant's sign code covers 21 sign types, including Freestanding Sign (General Use - Non-Residential Uses), Freestanding Sign (Multi-Tenant Development < 40,000 sq. ft.), Freestanding Sign (Multi-Tenant Development ≥ 40,000 sq. ft.), and Freestanding Sign (US 17/IOP Connector). Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Customary maintenance of a sign that does not change the dimensions of the sign or the copy displayed by the sign does not require a sign permit. The full list is on this page.
In Mount Pleasant, Freestanding Sign (General Use - Non-Residential Uses) must be set back at least 10 ft from curb and/or street right-of-way. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Mount Pleasant's sign ordinance that cover digital, changing, or flashing signs: All sign illumination must be from a steady, stationary light source; flashing, blinking, or moving illumination is prohibited. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Mount Pleasant Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Mount Pleasant, South Carolina, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Mount Pleasant, South Carolina Sign Rules at a Glance
Mount Pleasant, South Carolina regulates 21 sign types across 1 zoning district. Freestanding Signs (US 17/IOP Connector) are capped at 20 ft tall and 50 sq ft. Most commercial signs in Mount Pleasant require a permit.
Detailed Sign Ordinance Requirements for Mount Pleasant, South Carolina
Sign Rules by Zoning District in Mount Pleasant (1 zone)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones - (AB-1, AB-2, CC, CL, CO, CR-O, ED, LI, MD, NC-2, NZ, OP-1, OP-2, PD, PI-I, PI-2, R-1, R-2, R-3, R-4, RC-2, RM, RR) | 21 | Flagpole height max 35 ft (in areas limited to 40 ft or less on the Building Height Plan Map); 50 ft in all other Building Height Plan Map Areas | 150 sq. ft. | Not listed |
Zone-by-Zone Sign Requirements in Mount Pleasant
General Regulations For All Zones - (AB-1, AB-2, CC, CL, CO, CR-O, ED, LI, MD, NC-2, NZ, OP-1, OP-2, PD, PI-I, PI-2, R-1, R-2, R-3, R-4, RC-2, RM, RR)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (General Use - Non-Residential Uses) | 8 ft. | 35 sq. ft. | Not listed | Minimum 10 ft from curb and/or street right-of-way; must conform to SCDOT Access and Roadside Management Standards Sight Distance Formula. | 1 per platted lot for the use; see multiple frontages allowance for second sign on secondary opposing frontage | On subject property; minimum 10 ft setback from curb and/or street right-of-way; may not be installed within the right-of-way or project into the vertical plane of the right-of-way. | Not listed | Unlock | § 156.825(A)-(B), Table 156.825-1 (General Use); § 156.825(F)-(G); § 156.816(A)-(B) |
| Freestanding Sign (Multi-Tenant Development < 40,000 sq. ft.) | 10 ft. | 50 sq. ft. | Not listed | Minimum 10 ft from curb and/or street right-of-way; SCDOT sight distance requirements apply. | 1 for the development | On subject property; minimum 10 ft setback from curb and/or street right-of-way. | Not listed | Unlock | § 156.825(B)(1), Table 156.825-1 (Multi-Tenant Development < 40,000 sq. ft.); § 156.825(C)(2); § 156.825(E)-(F); § 156.861 |
| Freestanding Sign (Multi-Tenant Development ≥ 40,000 sq. ft.) | 20 ft. | 150 sq. ft. | Not listed | Minimum 10 ft from curb and/or street right-of-way; SCDOT sight distance requirements apply. | 2 for the development | On subject property; minimum 10 ft setback from curb and/or street right-of-way. | Not listed | Unlock | § 156.825(B)(1), Table 156.825-1 (Multi-Tenant Development ≥ 40,000 sq. ft.); § 156.825(C)(2); § 156.825(E)-(F); § 156.861 |
| Freestanding Sign (US 17/IOP Connector) | 20 ft. | 50 sq. ft. | Not listed | Minimum 10 ft from curb and/or street right-of-way; SCDOT sight distance requirements apply. | 1 per platted lot | On lots adjacent to Johnnie Dodds Boulevard (U.S. 17) and the Isle of Palms Connector (SC 517); minimum 10 ft setback from curb and/or street right-of-way. | Not listed | Unlock | § 156.825(D), Table 156.825-1 (US 17/IOP Connector); § 156.825(F); § 156.816(B) |
| Incidental Sign - Perimeter (Non-Residential Uses) | 4 ft. | 4 sq. ft. | Not listed | Perimeter placement: between property line and applicable sign setback; must be within 15 ft of driveway entrance to public street. | Max 2 per entrance/exit | Within 15 ft of a driveway entrance to a public street; located between the property line and the applicable sign setback; only at driveway entrances where on-site traffic patterns are strictly limited to one-way. | Not listed | Unlock | § 156.845(B), Table 156.845-1 (Perimeter Signs); § 156.845(C)(2)-(3), (D)(1), (E) |
| Incidental Sign - Small Interior (Residential Uses) | 5 ft. | 3 sq. ft. | Not listed | Must be located at least 10 ft from any property line (interior to lot). | 1 per lot | Interior to lot (not within sign setback); oriented internally to the development. | Not listed | Unlock | § 156.845(B), Table 156.845-1 (Small Interior Signs - Residential Uses); § 156.845(C)(3), (D)(2)(a), (E)(1), (E)(5)-(7) |
| Incidental Sign - Small Interior (Non-Residential Uses) | 4 ft. | 4 sq. ft. | Not listed | Must be located at least 10 ft from any property line (interior to lot). | Up to 20 per acre | Interior to lot (not within sign setback); oriented internally to the development. | Not listed | Unlock | § 156.845(B), Table 156.845-1 (Small Interior Signs - Non-Residential Uses); § 156.845(C)(3), (D)(2)(a), (E) |
| Incidental Sign - Large Interior (Non-Residential Uses) | 8 ft. | 35 sq. ft. | Not listed | Minimum 30 ft setback from any property line. | Multi-tenant developments ≥ 40,000 sq. ft: max 2; < 40,000 sq. ft: max 1 | Interior to the development; oriented internally; at least 30 ft from any property line. | Not listed | Unlock | § 156.845(B), Table 156.845-1 (Large Interior Signs); § 156.845(C)(3), (D)(2)(b), (E) |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Mount Pleasant with a free PermitPal account.
Run a free code checkProhibited Signs in Mount Pleasant
- Use of illumination that simulates traffic control devices or emergency vehicles is prohibited for any sign.
- All sign illumination must be from a steady, stationary light source; flashing, blinking, or moving illumination is prohibited.
- Illuminated signs may not use light-reflecting backgrounds or letters; internally illuminated signs must have opaque backgrounds and matte finishes.
- For externally illuminated signs, light sources must be shielded and not visible from any street right-of-way, must not cause glare hazardous to pedestrians or vehicle drivers or create a nuisance to adjacent properties, and the light color must be white.
- Signs may not obstruct any fire escape, or any window, door, or opening used as a means of ingress or egress for firefighting, and may not be attached to a fire escape or placed where they interfere with required ventilation openings.
Exempt Signs in Mount Pleasant
- Signs required by local, state, or federal law are not prohibited by this subchapter.
- Exempt signs listed in § 156.812 are exempt from the applicability of this subchapter (specific list not provided in the excerpt).
- Sign permits are not required for exempt signs listed in § 156.812.
- Customary maintenance of a sign that does not change the dimensions of the sign or the copy displayed by the sign does not require a sign permit.
- Changing the copy on readerboard signs does not require a sign permit.
- Flags do not require a permit for either residential or non-residential uses.
- All temporary signs other than A-frame signs do not require a permit for either residential or non-residential uses.
Sign Plan & Submission Notes for Mount Pleasant
- A master sign program is required for all multi-tenant developments.
- All multi-tenant developments require a master sign program approved by the Design Review Board through the design review process.
- A master sign program is a required condition of approval of any new signs within a multi-tenant development and must be processed prior to installation of any signs.
- A master sign program shall be a condition of approval of any planned development, design review, use permit, or other application required by the town for multi-tenant developments.
- Approval of architectural plans that include signs does not constitute signage approval; a separate request for signage approval is required if approval is necessary for the sign type.
- Approval of a master sign program does not waive individual sign permit requirements for specific signs.
- After approval of a master sign program (or amendment), no signs may be erected, placed, painted, or maintained except in conformance with the approved plan.
- A master sign program submittal must include: site plan; locations of buildings/parking/driveways/landscaped areas; locations and elevations for proposed/existing signs; color scheme; sign style; lighting; materials; and sign dimensions.
- Comprehensive development project signs may be allowed on a lot outside of the development site via a master sign program, and such a sign will not be considered an off-premises sign.
- The Design Review Board has authority to review and approve master sign programs; the Zoning Administrator may approve signs that do not require a master sign program, and may refer applications to the Design Review Board.
Source: amlegal municipal code