Questions? Call us at (262) 218-2915

Sign Regulations in Pine Ridge Town, South Carolina

Pine Ridge Town, South Carolina has specific sign regulations covering 19 sign types across 5 zoning districts. Regulated sign types include Window Sign, Wall/Building Sign (including graphics), Freestanding Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Pine Ridge Town, South Carolina

Sample Sign Requirements in Pine Ridge Town

Sign TypeMax HeightMax AreaSetback
Freestanding Sign (Major residential development, >301 units)12 ft240 sq ft per sign, max 120 sq ft per face (divided among max 4 faces)10 ft from ROW, 20 ft from corner
Freestanding Sign (Secondary residential development, 101-300 units)12 ft160 sq ft per sign, max 80 sq ft per face (divided among max 4 faces)10 ft from ROW, 20 ft from corner
Freestanding Sign (Minor residential development, ≤100 units)12 ft80 sq ft per sign, max 40 sq ft per face (divided among max 4 faces)10 ft from ROW, 20 ft from corner

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Pine Ridge TownFull Coverage

Sign Types Covered

19

  • Window Sign
  • Wall/Building Sign (including graphics)
  • Freestanding Sign
  • Freestanding Sign (Major residential development, >301 units)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Pine Ridge Town

Frequently Asked Questions

In Pine Ridge Town, the height limit for Freestanding Sign (≤2,500 sq ft heated public floor space) in the Commercial District is 12 ft (Sec. 300-86D(1)(f)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Pine Ridge Town require a permit. From the submission notes on this page: Applications for sign permits must include site plans and elevation drawings showing sign location, existing/proposed landscaping affected, sign design and dimensions; in the case of freestanding signs, site plans are specifically required. Run a code check for an exact address to see the permit requirements for that zone.

Pine Ridge Town's sign code covers 19 sign types, including Window Sign, Wall/Building Sign (including graphics), Freestanding Sign, and Freestanding Sign (Major residential development, >301 units). Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: A permit is not required for the changing of copy on a permitted changeable copy sign. The full list is on this page.

In Pine Ridge Town, Freestanding Sign (≤2,500 sq ft heated public floor space) in the Commercial District must be set back 10 ft from right-of-way (Sec. 300-86D(1)(f)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Pine Ridge Town's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Pine Ridge Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Pine Ridge Town, South Carolina, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Pine Ridge Town, South Carolina Sign Rules at a Glance

Pine Ridge Town, South Carolina regulates 19 sign types across 5 zoning districts. Freestanding Signs in the Public and Semi-Public Districts are capped at 12 ft tall and 20 ft wide, set back 10 ft from right-of-way (Sec. 300-86D(1)(g)). Most commercial signs in Pine Ridge Town require a permit.

Detailed Sign Ordinance Requirements for Pine Ridge Town, South Carolina

Sign Rules by Zoning District in Pine Ridge Town (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District712 ft240 sq ft per sign, max 120 sq ft per face (divided among max 4 faces)Not listed
Commercial District718 in160 sq ft per sign, max 80 sq ft per face (max 4 faces)Not listed
Industrial District412 ftUp to 64 sq ft total or 32 sq ft per face per premises; smaller types by sign typeNot listed
Public and Semi-Public Districts412 ft40 sq ft per sign (max 2 faces)Not listed
General Regulations For All Zones330 ft flagstaff40 sq ft per faceNot listed

Zone-by-Zone Sign Requirements in Pine Ridge Town(sample of 3 of 5 zones)

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Major residential development, >301 units)12 ft240 sq ft per sign, max 120 sq ft per face (divided among max 4 faces)20 ft10 ft from ROW, 20 ft from corner1 per entranceAt entrances, 10 ft setback from street right-of-way, not within 20 ft of street cornerNot listedUnlock§300-86D(1)(a), §300-86A, §300-87A(3)-(4)
Freestanding Sign (Secondary residential development, 101-300 units)12 ft160 sq ft per sign, max 80 sq ft per face (divided among max 4 faces)20 ft10 ft from ROW, 20 ft from corner1 per entranceAt entrances, minimum 10 ft setback from ROW, not within 20 ft of cornerNot listedUnlock§300-86D(1)(b), §300-86A
Freestanding Sign (Minor residential development, ≤100 units)12 ft80 sq ft per sign, max 40 sq ft per face (divided among max 4 faces)20 ft10 ft from ROW, 20 ft from corner1 per entranceAt entrances, min 10 ft from ROW, not within 20 ft of cornerNot listedUnlock§300-86D(1)(c), §300-86A
Wall/Building Sign (including graphics)Not listed40 sq ftNot listedNot listedNot listedFaçade facing ROWNot listedUnlock§300-87A(1)
Window SignNot listedNot listedNot listedNot listedNot listedWindow, up to 15 ft insideNot listedUnlock§300-87A(2)
Temporary Sign (Garage Sale, residential real estate, election, etc.)8 ft (lower edge not over 4 ft above grade)6 sq ft per face for garage sale, real estate, and election signs; Up to 64 sq ft total or 32 sq ft/face unless otherwise restrictedNot listed10 ft from ROW; 100 ft from certain sites/intersections/other signs1 on-site and 1 off-site for garage salesAs per temporary sign location restrictions, min 10 ft from ROW, not impeding vision, specific distance from churches/public bldgs/intersections/other signsNot listedUnlock§300-85B(6,8,9,10), §300-87B(2), (d)
Personal Identification or 'For Sale/For Rent' Sign (Residential)Not listed2 sq ft (personal identification), 6 sq ft ('For Sale'/‘For Rent’)Not listedNot listed1 personal, 1 'For Sale/For Rent'Affixed to dwelling or on groundsNot listedUnlock§300-85B(10), §300-84S

Commercial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Major commercial, 25,000-75,000 sq ft)12 ft160 sq ft per sign, max 80 sq ft per face (max 4 faces)20 ft10 ft from ROW, 20 ft from corner1 per entrance, max 2At entrances; 10 ft setback from street ROW, 20 ft from cornerNot listedUnlock§300-86D(1)(d), §300-86A, §300-87A(3)
Freestanding Sign (Minor commercial, ≤25,000 sq ft)12 ft80 sq ft per sign, max 40 sq ft per face (max 4 faces)20 ft10 ft from ROW, 20 ft from corner1 per entrance, max 2At entrances; 10 ft setback from street ROW, 20 ft from cornerNot listedUnlock§300-86D(1)(e), §300-86A
Freestanding Sign (≤2,500 sq ft heated public floor space)12 ft40 sq ft per sign (max 2 faces)20 ft10 ft from ROW1At entrances; 10 ft setbackNot listedUnlock§300-86D(1)(f)
Wall/Building Sign (including graphics)Not listed40 sq ft (60 sq ft if small commercial waives freestanding sign)Not listedNot listedNot listedOn façadeNot listedUnlock§300-87A(1), §300-86D(1)(f)
Window SignNot listedNot listedNot listedNot listedNot listedWindow, up to 15 ft insideNot listedUnlock§300-87A(2), §300-86D(1)(f)
Temporary Sign (grand opening, sale signs, etc.)8 ft (lower edge not above 4 ft)Up to 64 sq ft total or 32 sq ft per face per premises; some smaller types by specific sign typeNot listed10 ft from ROWNot listedOn premises, per general temporary sign location restrictionsNot listedUnlock§300-87B(1)-(2)
Canopy Sign18 inNot listed6 ftNot listed1 per occupancyPlaced entirely under canopy (marquee) in front of occupancyNot listedUnlock§300-87D

Public and Semi-Public Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign12 ft40 sq ft per sign (max 2 faces)20 ft10 ft from ROW1At entrances, 10 ft setback from ROWNot listedUnlock§300-86D(1)(g)
Wall/Building SignNot listed40 sq ftNot listedNot listedNot listedBuilding façadeNot listedUnlock§300-87A(1)
Window SignNot listedNot listedNot listedNot listedNot listedWindow, up to 15 ft insideNot listedUnlock§300-87A(2)
Message Board (Institutional Use)12 ft (higher if required for street-level visibility, at Planning Official's discretion)20 sq ft (standalone message board); 45 sq ft if combined with ID signNot listedPer general sign setback rules1 per street frontageSetback per general sign requirementsNot listedUnlock§300-87E

PermitPal covers all 5 zoning districts in Pine Ridge Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Pine Ridge Town

  • It is unlawful to erect, place, or use within the Town, when visible from any public way, any of the following signs: swinging signs; sidewalk and sandwich signs (except for specific organizations as approved); banners, pennants, and balloons (except for specific organizations as approved); off-premises signs; signs with moving, flashing, animated lights or visible moving/movable parts, or giving the appearance of animation; roof signs; vehicle signs; any sign emitting sound, odor, or visible matter; any sign obstructing ingress, egress, or required exits; any sign that obstructs or may be confused with a governmental or traffic sign; any sign (other than a freestanding and vertical wall extension) extending above a parapet, roofline, or canopy; signs displaying intermittent lights resembling emergency or traffic-signal lights, or using misleading/confusing words or symbols; moving message and time and temperature signs; signs placed within any street or highway right-of-way (except by a public agency); signs painted on or attached to trees, fence posts, rocks, natural features, utility poles, or building roofs visible from a public thoroughfare; abandoned or dilapidated signs; signs exhibiting obscene or pornographic content; portable signs (except for specific organizations as approved); signs affixed to or displayed on a private residence/dwelling or its grounds, except one small personal identification sign and one small nonilluminated real estate sign; inflatable signs; rotating signs; cardboard, poster board, plywood or OSB signs; bench signs; billboard signs.
  • It is unlawful to place any sign, banner, poster, placard, notice, picture, circular, or other device on public property in the Town without a permit from the Town Administrator.
  • It is unlawful to place any sign, advertisement, or notice on private property without the consent of the owner or lessee.
  • It is unlawful to place any sign or signboard not attached to a building nearer than 10 feet to the street right-of-way.
  • It is unlawful to place any sign overhanging the street right-of-way without a permit (and such permits are not granted for overhanging signs used for vehicles, and other conditions apply).
  • No sign shall be erected or maintained on any corner lot within the line connecting points on the street lot line 20 feet distance from the corner.
  • No sign shall have light-reflecting backgrounds (but may have nonmoving light-reflecting lettering).
  • Signs are not permitted to contain a commercial sponsor name or motif (e.g., soda bottles, hamburgers, other figures) or other outdoor commercial displays.
  • No sign is permitted to obstruct or impair driver vision at ingress/egress points and intersections.
  • Any sign that becomes dilapidated or structurally unsound must be removed within 20 days after notice, or is considered illegal.

Exempt Signs in Pine Ridge Town

  • The following signs are exempt from permit requirements, after notification to the Planning Official: official sign or notice issued by any court, public agency, or office; traffic directional, warning or information sign authorized by a public agency; private street or road name sign or traffic directional sign not exceeding four square feet per face; 'no trespassing', 'no hunting', 'no fishing', 'no loitering', and similar signs not exceeding one square foot in area; any on-premises sign not exceeding one square foot in area; residential real estate sign not exceeding six square feet per sign face; ingress/egress sign not exceeding four square feet per sign face; political signs for candidates or elections/public referenda, confined to private property, not exceeding six square feet per face and removed within seven days post-election; temporary garage sale signs in residential districts limited to certain wording, max size six square feet, time/conduct restrictions; signs affixed to a private residence/ground including one personal identification sign (max two square feet) and one nonilluminated 'For Sale'/'For Rent' sign (max six square feet).
  • A permit is not required for the changing of copy on a permitted changeable copy sign.
  • A permit is not required for painting or refinishing the surface or sign face/structure of a permitted sign to maintain its appearance.

Sign Plan & Submission Notes for Pine Ridge Town

  • No language referencing the requirement of a Master Sign Plan or comprehensive sign plan for developments is present in the given sections.
  • Applications for sign permits must include site plans and elevation drawings showing sign location, existing/proposed landscaping affected, sign design and dimensions; in the case of freestanding signs, site plans are specifically required.
  • If requested by the Planning Official, structural calculations (stress sheets) may be required to verify sign safety.
  • Variance or appeals from enforcement actions may be made to the Board of Zoning Appeals upon receipt of a violation notice as per the procedures in § 300-90.

Source: ecode360 municipal code