Questions? Call us at (262) 218-2915

Sign Regulations in Santee, South Carolina

Santee, South Carolina has specific sign regulations covering 27 sign types across 7 zoning districts. Regulated sign types include Directory Sign, Building Sign, Bench Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Santee, South Carolina

Sample Sign Requirements in Santee

Sign TypeMax HeightMax AreaSetback
Identification SignNot listed8 sq. ft. (temporary), 40 sq. ft. (per entrance, subdivision project)Not listed
Incidental SignNot listed4 sq. ft.Not listed
Political SignNot listed32 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for SanteeFull Coverage

Sign Types Covered

27

  • Directory Sign
  • Building Sign
  • Bench Sign
  • Changeable Copy Sign
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Santee

City WebsiteMunicipal Code5 permit application links available

Frequently Asked Questions

In Santee, the height limit for Freestanding Sign (GC-F1) in the General Commercial (GC) zoning district is 35 ft. Maximum sign heights range from 12 ft to 35 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Santee require a permit. From the submission notes on this page: A sign permit is required for all signs except those defined as 'allowed without permit' (in Table 9-1, marked 'A'), and requires submission of an application with site plan, structural assurances, etc. Run a code check for an exact address to see the permit requirements for that zone.

Santee's sign code covers 27 sign types, including Directory Sign, Building Sign, Bench Sign, and Changeable Copy Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Emergency signs (for right-of-way placement). The full list is on this page.

In Santee, Freestanding Sign in the Office Commercial (OC) zoning district must be set back 2 ft. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Santee's sign ordinance that cover digital, changing, or flashing signs: Changeable Electronic Message signs shall not exceed maximum brightness standards: Dawn to dusk-not more than 7,500 nits, Dusk to dawn-no greater than 750 nits, as measured from the sign's face at maximum brightness. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Santee Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Santee, South Carolina, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Santee, South Carolina Sign Rules at a Glance

Santee, South Carolina regulates 27 sign types across 7 zoning districts. Freestanding Signs in the Institutional (INS) zoning district are capped at 12 ft tall and 20 sq ft, with a 2 ft setback. Most commercial signs in Santee require a permit.

Detailed Sign Ordinance Requirements for Santee, South Carolina

Sign Rules by Zoning District in Santee (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District (RS-1, RS-2, RS-3, RG)4Not listed32 sq. ft.Not listed
Office Commercial (OC)1912 ft.24 sq. ft.Not listed
General Commercial (GC)1735 ft.200 sq. ft.Not listed
Industrial (I)1512 ft.24 sq. ft.Not listed
Planned Development (PD)1512 ft.Not listedNot listed
Institutional (INS)1612 ft.20 sq. ft.Not listed
General Regulations For All Zones1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Santee(sample of 3 of 7 zones)

Office Commercial (OC)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign12 ft.24 sq. ft.Not listed2 ft.1 per occupied lot (see additional requirements for multi-frontage lots)Not listedNot listedUnlockTable 9-1, Table 9-2
Building SignNot listedNot listedNot listedNot listed2 per buildingOn building wallNot listedUnlockTable 9-1, Table 9-2
Bench SignNot listedNot listedNot listedNot listedNot listedOn bench or seat, adjacent to right-of-wayNot listedUnlockTable 9-1
Canopy SignNot listedNot listedNot listedNot listedNot listedSuspended from, attached to, or forms part of a canopyNot listedUnlockTable 9-1
Directional SignNot listedNot listedNot listedNot listedNot listedOff-premises, points to location/directionNot listedUnlockTable 9-1
Festoon LightingNot listedNot listedNot listedNot listedNot listedOutdoor, between two or more pointsNot listedUnlockTable 9-1
FlagNot listedNot listedNot listedNot listedNot listedMounted using grommets or rope spline, hemmed edges.Not listedUnlockTable 9-1
Flat SignNot listedNot listedNot listedNot listedNot listedParallel to building, extends not more than 12 inches, not above buildingNot listedUnlockTable 9-1

General Commercial (GC)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (GC-F1)35 ft.200 sq. ft.Not listed2 ft.1 per occupied lot (see Note E)Not listedNot listedUnlockTable 9-1, Table 9-2 Note E
Freestanding Sign (GC-F2)12 ft.80 sq. ft.Not listed2 ft.1 per occupied lotNot listedNot listedUnlockTable 9-2
Building SignNot listedNot listedNot listedNot listedNot listedOn building wallNot listedUnlockTable 9-1, Table 9-2
A-Frame SignNot listed12 sq. ft.Not listedNot listedNot listedSidewalks, placed not to obstruct movementNot listedUnlockTable 9-1, Table 9-3
Bench SignNot listedNot listedNot listedNot listedNot listedOn bench or seat, adjacent to right-of-wayNot listedUnlockTable 9-1
Canopy SignNot listedNot listedNot listedNot listedNot listedSuspended from, attached to, applied to, or forms part of a canopyNot listedUnlockTable 9-1
Directional SignNot listedNot listedNot listedNot listedNot listedOff-premises, points to location/directionNot listedUnlockTable 9-1
Festoon LightingNot listedNot listedNot listedNot listedNot listedOutdoor, between two or more pointsNot listedUnlockTable 9-1

Institutional (INS)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign12 ft.20 sq. ft.Not listed2 ft.1 per occupied lotNot listedNot listedUnlockTable 9-1, Table 9-2
Building SignNot listed12 sq. ft.Not listedNot listed1 per buildingOn building wallNot listedUnlockTable 9-2
Bench SignNot listedNot listedNot listedNot listedNot listedOn bench or seat, adjacent to right-of-wayNot listedUnlockTable 9-1
Canopy SignNot listedNot listedNot listedNot listedNot listedSuspended from, attached to, or forms part of a canopyNot listedUnlockTable 9-1
Directional SignNot listedNot listedNot listedNot listedNot listedOff-premises, points to location/directionNot listedUnlockTable 9-1
Flat SignNot listedNot listedNot listedNot listedNot listedParallel to building, extends not more than 12 inches, not above buildingNot listedUnlockTable 9-1
Roof SignNot listedNot listedNot listedNot listedNot listedMounted on roof, projects above flat roof, or ridge line of mansard roofNot listedUnlockTable 9-1
Projecting SignNot listedNot listedNot listedNot listedNot listedExtends more than 6 inches from facadeNot listedUnlockTable 9-1

PermitPal covers all 7 zoning districts in Santee. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Santee

  • All signs not expressly permitted by this ordinance are prohibited.
  • Signs painted on or attached to trees, fence posts, utility poles, stationary vehicles, or natural features.
  • Signs displaying intermittent lights resembling the flashing lights customarily used in traffic signals or in police, fire, ambulance, rescue vehicles or other warning signals, and signs using the words "stop", "danger" or any other word, phrase, symbol, or character in a manner that might mislead or confuse motorists.
  • Signs which have been abandoned and no longer correctly direct or exhort any person, advertise a bona fide business, lessor, owner, product, or activity conducted or product available for 90 days.
  • No new high-rise signs are allowed.
  • No new billboard signs are allowed.
  • Off-premise signs of any type are not allowed.
  • Handbills (circulars)-distribution of is not allowed.
  • Signs which have fallen into disrepair (dilapidated), are not properly maintained, are insecure or otherwise structurally unsound, have defective parts in the support, guys and/or anchors, or which are unable to meet minimum safety requirements of the Standard Building Code.
  • Any nonconforming sign shall be removed or brought into conformity no later than 60 days following the effective date of this Ordinance.
  • No sign illuminated using beacon, spot, search or stroboscopic light or reflectors is allowed that is visible from any public right-of-way, or adjacent property. Also any flood lights which are not hooded or shielded so as to not impair driver vision.
  • Changeable Electronic Message signs shall not exceed maximum brightness standards: Dawn to dusk-not more than 7,500 nits, Dusk to dawn-no greater than 750 nits, as measured from the sign's face at maximum brightness.
  • Signs located within a vision clearance area as defined in the town's Zoning Ordinance.
  • No sign shall be allowed in the public right-of-way, except as specifically provided for public, informational, emergency, church, historic, and temporary yard sale/auction/ public gathering directional signs, with listed restrictions.

Exempt Signs in Santee

  • Signs not visible beyond the boundaries of the lot or parcel upon which they are situated, or from any public thoroughfare, or right-of-way.
  • Any commercial communication intended to be solely viewed while stopped in location or primarily viewed by pedestrian or other nonmotorized travelers; provided, however, that the restrictions of prohibited signs still apply to such communications.
  • Signage or markings authorized by the governing authority for public safety or public informational purposes.
  • Pavement markings of a traffic directional nature.
  • Temporary signs as specifically permitted for special events, parades, facility uses or outdoor vending under the authority of law in ordinances and regulatory procedures enacted by Town Council and then only during the duration of those events.
  • Public signs erected by or on behalf of a government body to post legal notices, identify public property, convey public information and direct or regulate pedestrian or vehicular traffic.
  • Informational signs of a public agency or utility.
  • Church signs in accord with state law (for right-of-way placement).
  • Historic signs and markers (for right-of-way placement).
  • Emergency signs (for right-of-way placement).
  • Directional signs of a temporary nature not exceeding three (3) square feet in area and 24 hours in duration for such events as yard sales, auctions, public gatherings, etc. when not closer than 500 feet apart (for right-of-way placement).

Sign Plan & Submission Notes for Santee

  • A Common Signage Plan is required as a prerequisite to the issuance of any sign permit involving two or more contiguous lots under the same ownership, any Planned Development (PD) project, or a single lot or parcel with more than one principal use/building or qualifying for more than one free-standing sign based on street frontage.
  • The Common Signage Plan must contain all information required for sign permits generally, and specify standards for consistency among all signs on the affected lot(s) regarding lettering/graphic style, lighting, location, material, and proportions.
  • Any new or amended Common Signage Plan filed for a property with existing signs shall include a schedule to bring nonconforming signs into compliance within three years.
  • A sign permit is required for all signs except those defined as 'allowed without permit' (in Table 9-1, marked 'A'), and requires submission of an application with site plan, structural assurances, etc.
  • Appeals or requests for relief from any part or provision of the ordinance, or from a decision of the Zoning Administrator, may be filed with the Zoning Board of Appeals.

Source: municode municipal code