Sign Regulations in Spring Hill, Tennessee

Spring Hill, Tennessee has specific sign regulations covering 12 sign types across 8 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign - Standard, Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: July 9, 2025

Sign Regulation Overview for Spring Hill, Tennessee

Sample Sign Requirements in Spring Hill

Sign TypeMax HeightMax AreaSetback
Wall SignCannot project above roofline1 sq ft per linear foot of building wall; minimum of 32 sq ftMay encroach max 18 in into ROW; cannot project above roofline
Freestanding Sign - Standard8 ft32 sq ftMinimum 5 ft from lot line
Awning Sign25% of each surfaceMay encroach into ROW but must be 2 ft from curb

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Spring HillFull Coverage

Sign Types Covered

12

  • Wall Sign
  • Freestanding Sign - Standard
  • Awning Sign
  • A-Frame Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Spring Hill

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Spring Hill, wall signs can be up to Cannot project above roofline and monument signs are limited to 8 ft. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Spring Hill, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Spring Hill, regulated sign types include Wall Sign, Freestanding Sign - Standard, Awning Sign, A-Frame Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

In Spring Hill, monument signs typically require a Minimum 5 ft from lot line setback from property lines. Setbacks may increase near residential zones or intersections. Wall signs attached to buildings generally don't have setback requirements. Use PermitPal for location-specific setback data.

Digital and LED signs in Spring Hill are regulated with specific requirements for brightness, animation, and message duration. Spring Hill has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Spring Hill Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Spring Hill, Tennessee sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Spring Hill, Tennessee Sign Rules at a Glance

Spring Hill, Tennessee regulates 12 sign types across 8 zoning districts. Wall Signs in the C-1 Local Commercial District (C-1), C-2 Professional Office District (C-2) zoning district are capped at Cannot project above roofline tall and 1 sq ft per linear foot of building wall; minimum of 32 sq ft, with a May encroach max 18 in into ROW; cannot project above roofline setback (Sec. UDC Sec. 12.6.I, Table 12-1, 12.3, 12.2). Most commercial signs in Spring Hill require a permit.

Detailed Sign Ordinance Requirements for Spring Hill, Tennessee

Sign Rules by Zoning District in Spring Hill (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
AG Agricultural District (AG), R-A Rural Agricultural District (R-A), R-R Rural Residential District (R-R), R-1 Single-Family District (R-1), R-2 Single-Family District (R-2), R-3 Single-Family District (R-3), R-4 Single-Family District (R-4), R-5 Single-Family and Two-Family District (R-5), R-6 Multi-Family District (R-6), R-7 Multi-Family District (R-7), R-MH Manufactured Home Park District (R-MH), NA Natural Areas District (NA), PR Public Recreation District (PR), F-1 Open Floodway District (F-1), HS Hillside Slope Overlay District (HS)48 ft32 sq ft
C-1 Local Commercial District (C-1), C-2 Professional Office District (C-2)58 ft32 sq ft
C-3 Corridor Commercial District (C-3), C-4 General Commercial District (C-4), C-5 Regional Commercial District (C-5), C-G Gateway Mixed-Use District (C-G)920 ft200 sq ft
C-D Downtown District (C-D), C-D-C Downtown Center Sub-District (C-D-C), C-D-E1 Downtown Edge 1 Sub-District (C-D-E1), C-D-E2 Downtown Edge 2 Sub-District (C-D-E2)615 ft100 sq ft
I-1 Light Industrial Zoning District (I-1), I-2 General Industrial Zoning District (I-2), RD Research and Development District (RD)48 ft32 sq ft
IC Institutional Campus District (IC), Public Recreation District (PR)28 ft32 sq ft
H Historic Overlay District (H)28 ft32 sq ft
General Regulations For All Zones38 ft (<5 ac); 10 ft (>=5 ac)16 sq ft (freestanding/wall); up to 30% of window area (window)

Zone-by-Zone Sign Requirements in Spring Hill(sample of 3 of 8 zones)

C-1 Local Commercial District (C-1), C-2 Professional Office District (C-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignCannot project above roofline1 sq ft per linear foot of building wall; minimum of 32 sq ftMay encroach max 18 in into ROW; cannot project above rooflineNo max, cumulative sign area among all wall signs per facade may not exceed maximumFacades facing ROW, parking area, or public space; not service area facadeUnlockUDC Sec. 12.6.I, Table 12-1, 12.3, 12.2
Freestanding Sign - Standard8 ft32 sq ftMin 5 ft from lot line; not in ROW1 per lotOne per lot, minimum 5 ft from any lot lineUnlockUDC Sec. 12.6.D, Table 12-1
Projecting Sign12 sq ft1 per establishment per frontageOne per establishment w/frontage; one per street frontage for corner lotsUnlockUDC Sec. 12.6.H
Awning Sign25% of each surfaceMay encroach into ROW but must be 2 ft from curbOver door/window; may project up to 8ft from facade, min 8ft clearanceUnlockUDC Sec. 12.6.B
A-Frame Sign4 ft6 sq ft per faceMaintain 5 ft sidewalk clearance at all times1 per establishmentWithin 15 ft of business entranceUnlockUDC Sec. 12.5.C.1

C-3 Corridor Commercial District (C-3), C-4 General Commercial District (C-4), C-5 Regional Commercial District (C-5), C-G Gateway Mixed-Use District (C-G)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignCannot project above roofline1 sq ft per linear foot of building wall; minimum of 32 sq ftMay encroach max 18 in into ROW; cannot project above rooflineNo max, all wall signs on a facade limited to total allowedFacades facing ROW, parking area, or public space; not service area facadeUnlockUDC Sec. 12.6.I, Table 12-1
Freestanding Sign - Standard8 ft32 sq ftMin 5 ft from lot line; not in ROW1 per lotOne per lot, minimum 5 ft from any lot lineUnlockUDC Sec. 12.6.D, Table 12-1
Freestanding Sign - Multi-Tenant Retail Center (<10 acres)15 ft100 sq ftMin 5 ft from lot line1 per lot (<10 ac); additional with entry points on larger sitesOne per lot; must be on a lot of at least 10 acres for additionalUnlockUDC Sec. 12.6.D(4)
Freestanding Sign - Multi-Tenant Retail Center (10 to <30 acres)20 ft150 sq ftMin 5 ft from lot line1 per lot; more with extra entries/sizeOne per lot; additional for entry points if 100 ft apartUnlockUDC Sec. 12.6.D(4)(ii)
Freestanding Sign - Multi-Tenant Retail Center (30+ acres)20 ft200 sq ftMin 5 ft from lot line1 per lot, + per eligible entriesOne per lot, plus additional entries if 100 ft apartUnlockUDC Sec. 12.6.D(4)(iii)
Projecting Sign16 sq ft1 per establishment per street frontageOne per establishment street frontage; 8ft clearance; <6 ft projectionUnlockUDC Sec. 12.6.H
A-Frame Sign4 ft6 sq ft per faceMaintain 5ft sidewalk clearance1 per establishmentWithin 15 ft of business entranceUnlockUDC Sec. 12.5.C.1
Freestanding Sign - Residential Subdivision8 ft100 sq ftMin 5 ft from lot line1 per entryEntry points to residential subdivisionsUnlockUDC Sec. 12.6.D(5)

C-D Downtown District (C-D), C-D-C Downtown Center Sub-District (C-D-C), C-D-E1 Downtown Edge 1 Sub-District (C-D-E1), C-D-E2 Downtown Edge 2 Sub-District (C-D-E2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignCannot project above roofline1 sq ft per linear foot of bldg wall; minimum 32 sq ftMay encroach max 18 in into ROW; cannot go above rooflineNo max per facade, total area per facade limited to maxEach facade facing ROW, parking area, or public spaceUnlockUDC Sec. 12.6.I, Table 12-1; C-D/C-D-C, etc. design standards
Projecting Sign12 sq ft (C-D); 16 sq ft (all other C districts)1 per establishment per frontageOne per establishment street frontage; 8ft clearance; <6 ft projectionUnlockUDC Sec. 12.6.H, C-D design standards
Freestanding Sign - Standard8 ft32 sq ftMin 5 ft from lot line1 per lotOne per lot, min 5 ft from any lot line (subject to C-D streetscape design)UnlockUDC Sec. 12.6.D, Table 12-1; C-D design standards
Awning Sign25% of each surfaceOver door/window; up to 8ft projection, 8ft min clearance to ground; at least 2 ft from curb when projecting over ROWUnlockUDC Sec. 12.6.B; C-D design standards
A-Frame Sign4 ft6 sq ft per faceMaintain 5ft sidewalk clearance1 per establishmentWithin 15 ft of entrance of businessUnlockUDC Sec. 12.5.C.1
Freestanding Sign - Multi-Tenant Retail Center (<10 acres)15 ft100 sq ftMin 5 ft from lot line1 per lot (<10 ac), + for entriesOne per lot; extra for additional entries (100ft apart), if eligibleUnlockUDC Sec. 12.6.D(4); C-D design standards

PermitPal covers all 8 zoning districts in Spring Hill — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 8 zones for Spring Hill — start free

Prohibited Signs in Spring Hill

  • No sign may be erected in a location that violates the building code, fire code, and other applicable City codes or ordinances.
  • No sign may obstruct the sight triangle, as described in Article 9.
  • Only signs that have been placed by or authorized by federal, state, or the City may be installed on public property. Any sign installed on public property, including rights-of-way, and public easements without prior authorization may be removed by the City without notice.
  • No permanent sign may be erected on private property without the consent of the property owner or his/her authorized agent.
  • No sign may be erected in a manner that obstructs access to any ingress or egress, fire escapes, fire hydrants, fire department connections, or standpipes and similar fire safety connections.
  • No sign may be installed in a manner that obstructs stormwater flow for the stormwater system serving that lot.
  • Audio components are generally prohibited, with the listed exceptions (menu boards, drive-through service windows, permitted gas station pump video screens).
  • All permanent signs must be constructed of rigid, weather-proof materials.
  • No sign illumination may be combined with reflective materials, such as mirrors, polished metal, or highly-glazed tiles, which would increase glare.
  • Neon or LED lighting to outline doors, windows, architectural features, and building facades is prohibited.
  • Flickering or flashing lights are prohibited.
  • Searchlights, laser source lights, or any similar high intensity lights are prohibited.
  • Lighting by exposed bulbs is prohibited (except as part of a temporary use).
  • Any lighting that may be confused with emergency services (red and blue lighting) or traffic signals (red, yellow, and green lighting) is prohibited.
  • Mercury vapor lighting is prohibited.
  • Unshielded LED rope lighting is prohibited.
  • All signs not expressly permitted by this Code are prohibited.
  • Banners used as permanent signs, including banners wrapped around permanent sign structures, are prohibited.
  • Balloon signs that exceed one square foot in area are prohibited.
  • Electronic message signs (EMC) are prohibited.
  • Flashing or animated signs are prohibited.
  • Moving signs, including any sign that rotates, revolves, or has any visible moving part, or gives the appearance of movement, are prohibited (except clocks and barber poles).
  • Neon or LED signs, with the exception of permissions for window signs, are prohibited.
  • Obsolete signs and sign structures are prohibited.
  • Portable reader-board signs are prohibited.
  • Roof signs are prohibited.
  • Strobe lights, moving or fixed spotlights, and floodlights/searchlights are prohibited.
  • Signs that constitute a traffic hazard: those that interfere with, obstruct the view of, or may be confused with traffic signs/signals; illuminated in traffic signal colors; use certain traffic words or phrases; may be confused with public safety lighting.
  • Vehicle signs on unlicensed, uninsured, or inoperable vehicles placed for the primary purpose of attracting attention to the occupant’s presence within a building at which the vehicle is being parked are prohibited (exception: vehicles used in the normal course of business).
  • Video display signs are prohibited.
  • No sign, including sign hardware or wiring, may remain on the premises more than five business days after a non-residential occupant vacates a building or tenant space.

Exempt Signs in Spring Hill

  • Painting, cleaning, or other normal maintenance and repair of a sign, not involving structural changes or changes in electrical components, is exempt from requiring a sign permit.
  • Changing the copy of a changeable message sign does not require a sign permit.
  • Logos and labels on mechanical equipment, recycling bins, trash containers, and similar objects, as part of the equipment as manufactured and/or installed, are exempt.
  • Building address signs (wall-mounted, maximum two square feet per building entry, or at entrance drive, maximum two square feet and four feet in height), unless required for fire safety or other City safety purposes, are exempt.
  • A-Frame signs (subject to restrictions on districts, dimensions, placement, hours of display, etc.) are exempt from sign permit requirement.
  • Auction activity signs (with size, timing, and frequency restrictions) are exempt.
  • Construction activity signs (with size, location, and timing restrictions) are exempt.
  • Government signs: Federal, state, or local government or taxing bodies may install signs in the public interest in any number, configuration, or size, and these are exempt.
  • Holiday and seasonal decorations on private property are exempt (maximum display period of 60 days per holiday).
  • Memorial or historic event signs are allowed as exempt (one per street frontage, maximum size, and height restrictions).
  • Multiple tenant building entryway signs (maximum size and location restrictions) are exempt.
  • Noncommercial message signs (subject to restrictions on size, location, illumination, and timing) are exempt.
  • Not-for-profit community event signs (subject to size, timing, and frequency restrictions) are exempt.
  • Off-premise commercial temporary signs (with weekend, timing, and display period limits) are exempt.
  • Parking lots and structures: additional signs for entrances/exits, driveways, lane markers, and circulation points (subject to size and height restrictions) are exempt.
  • Real estate activity signs (subject to size, location, and timing restrictions) are exempt.
  • Window signs (subject to size and illumination restrictions) are exempt.

Sign Plan & Submission Notes for Spring Hill

  • A sign permit is required for all permanent and temporary signs except those identified as exempt by the Code.
  • A sign permit is required for any new or modified sign (except for changing sign copy or normal maintenance; changing sign face does require a permit).
  • All new billboards and modifications to existing billboards require a sign permit (modifications do not include changing the advertising on the billboard face).
  • Any sign permit application for a new or modified sign must include plans and specifications for the proposed sign.
  • Sign permit applications are processed and must be in compliance with the Unified Development Code and other City codes.
  • If the work authorized under a sign permit is not completed within 180 days (or longer, if specified at the time of issuance), the sign permit expires and is void.
  • Exempt signs (as listed in Sec. 12.5) do not require a sign permit.
  • Approval of site plans for multi-family, non-residential, and mixed-use developments must show monument sign(s) and other site signage locations for review.
  • No permanent sign may be erected on private property without the consent of the property owner or their authorized agent, and, if not owned by the applicant, written permission must be submitted as part of the sign permit application.
  • For new non-residential construction or major site work, all site signage (including placement) should be included in the plan submittal for site plan review.

Source: other municipal code