Questions? Call us at (262) 218-2915

Sign Regulations in Bellmead, Texas

Bellmead, Texas has specific sign regulations covering 10 sign types across 4 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Single-family Subdivision Identification Monument Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Bellmead, Texas

Sample Sign Requirements in Bellmead

Sign TypeMax HeightMax AreaSetback
Single-family Subdivision Identification Monument Sign8 ft.120 sq. ft.25 ft. from any property line, outside all setback clearance zones.
Multi-family Complex Sign (Wall)8 ft.120 sq. ft.25 ft. from any property line, outside all setback clearance zones.
Multi-family Complex Sign (Monument)8 ft.120 sq. ft.25 ft. from any property line, outside all setback clearance zones.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BellmeadFull Coverage

Sign Types Covered

10

  • Wall Sign
  • Freestanding Sign
  • Single-family Subdivision Identification Monument Sign
  • Multi-family Complex Sign (Wall)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Bellmead

City WebsiteMunicipal Code3 permit application links available

Frequently Asked Questions

In Bellmead, the height limit for Single-family Subdivision Identification Monument Sign in the Residential districts is 8 ft (Sec. 17-12(6)a). The height limit for Multi-family Complex Sign (Wall) in the Residential districts is 8 ft (Sec. 17-12(6)b). Maximum sign heights range from 8 ft to 100 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Bellmead require a permit. From the submission notes on this page: Any sign regulations incorporated into a development plan approved by the city council may supersede all or part of this section. Run a code check for an exact address to see the permit requirements for that zone.

Bellmead's sign code covers 10 sign types, including Wall Sign, Freestanding Sign, Single-family Subdivision Identification Monument Sign, and Multi-family Complex Sign (Wall). Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Any sign regulations incorporated into a development plan approved by the city council may supersede all or part of this section. The full list is on this page.

In Bellmead, Monument Sign in the Commercial zoning district must be set back at least 10 ft from property line (Sec. 17-12(7)(v)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Bellmead's sign ordinance that cover digital, changing, or flashing signs: Images or messages from an electronic sign shall not blink, flash, scroll or be animated in such a manner as to constitute a distraction to motorists, pedestrians or the general public. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Bellmead Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bellmead, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Bellmead, Texas Sign Rules at a Glance

Bellmead, Texas regulates 10 sign types across 4 zoning districts. Monument Signs in the Commercial zoning district are capped at 8 ft tall and 120 sq ft, set back at least 10 ft from property line (Sec. 17-12(7)(v)). Most commercial signs in Bellmead require a permit.

Detailed Sign Ordinance Requirements for Bellmead, Texas

Sign Rules by Zoning District in Bellmead (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones2Not listedNot listedNot listed
Residential districts58 ft.120 sq. ft.Not listed
Commercial4100 ft.500 sq. ft. (combined all wall signs)Not listed
Down Town Revitalization District140 ft.500 sq. ft.Not listed

Zone-by-Zone Sign Requirements in Bellmead(sample of 3 of 4 zones)

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Single-family Subdivision Identification Monument Sign8 ft.120 sq. ft.Not listed25 ft. from any property line, outside all setback clearance zones.2 per entrance, not to exceed 8 per subdivisionAt street or private drive entrance to subdivision.Not listedUnlockSec. 17-12(6)a
Multi-family Complex Sign (Wall)8 ft.120 sq. ft.Not listed25 ft. from any property line, outside all setback clearance zones.2 per main entrance, not to exceed 4 per complexAt street or private drive entrance to complex.Not listedUnlockSec. 17-12(6)b
Multi-family Complex Sign (Monument)8 ft.120 sq. ft.Not listed25 ft. from any property line, outside all setback clearance zones.2 per main entrance, not to exceed 4 per complexAt street or private drive entrance to complex.Not listedUnlockSec. 17-12(6)b
Multi-family Complex Sign (Freestanding)8 ft.120 sq. ft.Not listed25 ft. from any property line, outside all setback clearance zones.2 per main entrance, not to exceed 4 per complexAt street or private drive entrance to complex.Not listedUnlockSec. 17-12(6)b
Multi-family Complex Sign (Canopy)8 ft.120 sq. ft.Not listed25 ft. from any property line, outside all setback clearance zones.2 per main entrance, not to exceed 4 per complexAt street or private drive entrance to complex.Not listedUnlockSec. 17-12(6)b

Commercial

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed500 sq. ft. (combined all wall signs)Not listedAt least 10 ft. from any property line.Max 4 signs total; see limit on freestandingAffixed to building facing commercial area.Not listedUnlockSec. 17-12(7)a, (7)(ii), (7)(iii)
Monument Sign8 ft.120 sq. ft.Not listedAt least 10 ft. from property line.Max 4 signs total; see limit on freestandingOn property, at least 10 ft. from property line.Not listedUnlockSec. 17-12(7)(v)
Freestanding Sign100 ft.500 sq. ft.Not listedAt least 10 ft. from property line.Max 4 signs per lot; not more than 1 freestanding sign on same lotOn property, with appropriate frontage and clear of other freestanding signs.Not listedUnlockSec. 17-12(7)(iv),(7)(b),(3),(4)
Canopy Sign (Awning-Marquee)Not listed500 sq. ft. (all canopy/awning signs combined)Not listedAt least 10 ft. from property line.Max 4 signs total; see limit on freestandingAffixed to canopy, awning, or marquee; facing commercial area.Not listedUnlockSec. 17-12(7)(vi)

Down Town Revitalization District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Down Town Revitalization District)40 ft.500 sq. ft.Not listedAt least 10 ft. from property line.Max 4 signs per lot; not more than 1 freestanding sign on same lotOn property, with appropriate frontage and clear of other freestanding signs. District: Hogan Lane to Loop 340 on Bellmead Drive.Not listedUnlockSec. 17-12(7)(iv)(A)(1), (3), (4)

PermitPal covers all 4 zoning districts in Bellmead. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Bellmead

  • Freestanding signs are only permitted on lots with eighty (80) feet or more of street frontage.
  • No freestanding sign shall be erected within fifty (50) feet of another freestanding sign.
  • All wall signs shall be installed not to project more than eighteen (18) inches perpendicular from the wall.
  • No illuminated sign shall be illuminated to such intensity or in such a manner as to cause glare or brightness to a degree that it constitutes a hazard or nuisance.
  • Images or messages from an electronic sign shall not blink, flash, scroll or be animated in such a manner as to constitute a distraction to motorists, pedestrians or the general public.

Exempt Signs in Bellmead

  • Any sign regulations incorporated into a development plan approved by the city council may supersede all or part of this section.

Sign Plan & Submission Notes for Bellmead

  • Any sign regulations incorporated into a development plan approved by the city council may supersede all or part of this section.

Source: municode municipal code