Questions? Call us at (262) 218-2915

Sign Regulations in Double Oak, Texas

Double Oak, Texas has specific sign regulations covering 11 sign types across 2 zoning districts. Regulated sign types include Awning, Canopy and Marquee Signs, Monument or Ground Signs, Building Wall-Mounted Signs. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 9, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Double Oak, Texas

Sample Sign Requirements in Double Oak

Sign TypeMax HeightMax AreaSetback
Monument or Ground SignsMaximum height of 5 feet.Maximum interior sign size of 3 feet high by 6 feet wide.At least 10 feet from the property line.
Building Wall-Mounted SignsNo more than 3 feet in height at any point.Maximum of 40 square feet.Not listed
Window SignsNot listedLimited to no more than 10% of the aggregate size of the window.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Double OakFull Coverage

Sign Types Covered

11

  • Awning, Canopy and Marquee Signs
  • Monument or Ground Signs
  • Building Wall-Mounted Signs
  • Window Signs
  • +2 more types

Zoning Districts

2

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

This page doesn't give a single height number for signs in Double Oak. The tables on this page quote the ordinance's height rules for the sign types we sampled. For example, the height rule for Monument or Ground Signs in the Business (B) and other zoning districts reads: Maximum height of 5 feet. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Double Oak require a permit. From the submission notes on this page: Requests for sign permits will be submitted to the town secretary in the form of a drawing of the proposed sign showing its dimensions, wording, color scheme, design and its exact proposed location on the new construction site or subdivision development. (Except for Class III - Commercial). Run a code check for an exact address to see the permit requirements for that zone.

Double Oak's sign code covers 11 sign types, including Awning, Canopy and Marquee Signs, Monument or Ground Signs, Building Wall-Mounted Signs, and Window Signs. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Government signs (signs erected and/or maintained by the state or federal government or an instrumentality or political subdivision thereof) are exempt. The full list is on this page.

In Double Oak, Monument or Ground Signs in the Business (B) and other zoning districts must be set back at least 10 feet from the property line (Sec. 3.1302(b)(6)(C)(ii)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Double Oak's sign ordinance that cover digital, changing, or flashing signs: No animated, illuminated, or flexible banner-type signs will be permitted within the town limits or extraterritorial jurisdiction of the town, unless specifically allowed in this article. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Double Oak Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Double Oak, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Double Oak, Texas Sign Rules at a Glance

Double Oak, Texas regulates 11 sign types across 2 zoning districts. Monument or Ground Signs in the Business (B) and other zoning districts must be set back at least 10 feet from the property line (Sec. 3.1302(b)(6)(C)(ii)). Most commercial signs in Double Oak require a permit.

Detailed Sign Ordinance Requirements for Double Oak, Texas

Sign Rules by Zoning District in Double Oak (2 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Business (B), Office (O), Retail (R), Planned Development (PD), Specific Use Permit (SUP) (nonresidential areas only)4Maximum height of 5 feet.Maximum of 40 square feet.Not listed
General Regulations For All Zones7Maximum height of 72 inches.Subdivision development signs: Maximum of 32 square feet.Not listed

Zone-by-Zone Sign Requirements in Double Oak

Business (B), Office (O), Retail (R), Planned Development (PD), Specific Use Permit (SUP) (nonresidential areas only)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning, Canopy and Marquee SignsNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 3.1302(b)(6)(C)(i)
Monument or Ground SignsMaximum height of 5 feet.Maximum interior sign size of 3 feet high by 6 feet wide.Maximum length of 8 feet.At least 10 feet from the property line.One monument sign per building.Must be at least 10 feet from the property line.Not listedUnlock§ 3.1302(b)(6)(C)(ii)
Building Wall-Mounted SignsNo more than 3 feet in height at any point.Maximum of 40 square feet.Not listedNot listedOne wall-mounted building sign per business.Shall not project more than 12 inches from the wall of such building.Not listedUnlock§ 3.1302(b)(6)(C)(vi)
Window SignsNot listedLimited to no more than 10% of the aggregate size of the window.Not listedNot listedNot listedLocated on windows.Not listedUnlock§ 3.1302(b)(6)(C)(viii)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Class I PrivateMaximum height is 60 inches.Maximum sign size is six (6) square feet.Not listedNot listedMaximum of two signs at any one time.May only be posted upon the premises of the location of the property or event.Not listedUnlock§ 3.1303(a)
Temporary Class II Off-Premises Public and Private EventsMaximum height is 60 inches.Maximum sign size is six (6) square feet.Not listedNot listedMaximum of six directional signs for private events.Off-premises display.Not listedUnlock§ 3.1303(b)
Temporary Class III Subdivision Development and New ConstructionSubdivision development signs: Maximum of 10 feet.Subdivision development signs: Maximum of 32 square feet.Not listedNot listedOne sign per new residential building site.Subdivision development signs: One sign per public roadway entrance to the subdivision.Not listedUnlock§ 3.1303(c)
Permanent Class I MunicipalNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 3.1303(d)
Permanent Class II Established SubdivisionMaximum height of 72 inches.Maximum of 20 square feet of sign area.Not listedNot listedOne sign per entrance/exit.At direct physical entrance/exit to subdivision.Not listedUnlock§ 3.1303(e)
Permanent Class III CommercialSame as Permanent Class II.Same as Permanent Class II.Not listedNot listedSame as Permanent Class II.Same as Permanent Class II.Not listedUnlock§ 3.1303(f)
Permanent Class IV Private AdvisoryNot listedMaximum of 4 square feet of each sign area.Not listedNot listedNot listedNot listedNot listedUnlock§ 3.1303(g)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Double Oak with a free PermitPal account.

Run a free code check

Prohibited Signs in Double Oak

  • All signs erected and maintained within the town limits and extraterritorial jurisdiction of the town may only relate to a current activity or persons who occupy or own the property at the sign location.
  • Off-premises signs are prohibited unless specifically allowed in this article.
  • No sign shall be erected that will interfere with the visibility of a motorist, nor may it obstruct the view of any traffic sign.
  • All signs must be posted at least eight (8) feet from the edge of a public roadway.
  • No animated, illuminated, or flexible banner-type signs will be permitted within the town limits or extraterritorial jurisdiction of the town, unless specifically allowed in this article.
  • No commercial signage of any type may be erected or maintained in a residential zoned district or area predominantly used for single-family residential purposes.
  • No person shall place, erect or maintain a sign without first having obtained a permit as required by this article.
  • No person shall place, erect or maintain a sign that does not comply with any of the terms or provisions of this article.

Exempt Signs in Double Oak

  • Government signs (signs erected and/or maintained by the state or federal government or an instrumentality or political subdivision thereof) are exempt.
  • For the purposes of this article, 'sign' does not include signs erected and maintained pursuant to and in discharge of any governmental function or required by law, ordinance, or governmental regulation.
  • Temporary lights and holiday decorations shall be exempt from the provisions of this article provided that they are installed no sooner than mid-November and removed no later than January 5th of the next calendar year.

Sign Plan & Submission Notes for Double Oak

  • Requests for sign permits will be submitted to the town secretary in the form of a drawing of the proposed sign showing its dimensions, wording, color scheme, design and its exact proposed location on the new construction site or subdivision development. (Except for Class III - Commercial)
  • Further renewals of temporary Class III signs will require town council approval.