Questions? Call us at (262) 218-2915

Sign Regulations in Georgetown, Texas

Georgetown, Texas has specific sign regulations covering 29 sign types across 20 zoning districts. Regulated sign types include Freestanding Monument Sign, Low-Profile Pole Sign, Flag. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Georgetown, Texas

Sample Sign Requirements in Georgetown

Sign TypeMax HeightMax AreaSetback
Freestanding Monument Sign5 feet2 sq. ft.Minimum setback: 2 feet.
Flag25 feet40 sq. ft.Minimum setback: 5 feet.
Building Wall SignNot listed0.5 sq. ft. per linear foot of primary facadeNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for GeorgetownFull Coverage

Sign Types Covered

29

  • Freestanding Monument Sign
  • Low-Profile Pole Sign
  • Flag
  • Incidental Sign
  • +2 more types

Zoning Districts

20

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Georgetown

City Website2 permit application links available

Frequently Asked Questions

In Georgetown, the height limit for High Profile Monument Sign (allowed for SH 130 / SH 195 / IH-35 frontage in eligible C-1 properties) in the Local Commercial (C-1) zoning district is 28 ft (additional height allowed by elevation differential determination) (Sec. 10.06.030.G.1-7). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Georgetown require a permit. We haven't published Georgetown's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.

Georgetown's sign code covers 29 sign types, including Freestanding Monument Sign, Low-Profile Pole Sign, Flag, and Incidental Sign. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Legal notices. The full list is on this page.

In Georgetown, Freestanding Monument Sign in the Business Park (BP) zoning district must be set back 5 ft. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Georgetown's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Georgetown Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Georgetown, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Georgetown, Texas Sign Rules at a Glance

Georgetown, Texas regulates 29 sign types across 20 zoning districts. Flags in the Business Park (BP) zoning district are capped at 25 ft tall and 40 sq ft, with a 5 ft setback. Most commercial signs in Georgetown require a permit.

Detailed Sign Ordinance Requirements for Georgetown, Texas

Sign Rules by Zoning District in Georgetown (20 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Estate (RE)925 feet40 sq. ft.Not listed
Residential Low Density (RL)925 feet40 sq. ft.Not listed
Residential Single-family (RS)925 feet40 sq. ft.Not listed
Two-Family (TF)1025 feet40 sq. ft.Not listed
Townhouse (TH)1025 feet40 sq. ft.Not listed
Low Density Multifamily (MF-1)1025 feet40 sq. ft.Not listed
High Density Multifamily (MF-2)1025 feet40 sq. ft.Not listed
Manufactured Housing (MH)925 feet40 sq. ft.Not listed
Agriculture (AG)325 ft40 sq. ft.Not listed
Business Park (BP)728 ft225 sq. ft. per faceNot listed
Office (OF)525 ft40 sq. ft.Not listed
Neighborhood Commercial (CN)525 ft40 sq. ft.Not listed
Local Commercial (C-1)728 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listed
General Commercial (C-3)728 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listed
Industrial (IN)728 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listed
Public Facilities (PF)525 ft40 sq. ft.Not listed
Mixed Use Downtown (MU-DT) (MU-DT)1225 feet40 sq. ft.Not listed
Mixed Use (MU) (MU)11Not listedNot listedNot listed
Downtown Overlay (D) (D)85 feetNot listedNot listed
Old Town Overlay (OT) (OT)85 feetNot listedNot listed

Zone-by-Zone Sign Requirements in Georgetown(sample of 3 of 20 zones)

Business Park (BP)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Monument Sign6 ftNot to exceed 48 sq. ft. per sign faceNot listedMinimum setback: 5 ftMaximum number per lot: 1 per 500 ft of frontage or fraction thereofFreestanding monument sign (permanent freestanding).Not listedUnlock10.06.010 (Table 10.06.010), 10.06.030.A.1
Low-Profile Pole Sign10 ft20 sq. ft.Not listedMinimum setback: 5 ftMaximum number per lot: 1 per 500 ft of frontage or fraction thereofPole signs; permitted as an alternative to permitted pole or monument signs (low-profile pole signs).Not listedUnlock10.06.010 (Table 10.06.010), 10.06.030.A.2, 10.06.030.A.2.e.i-ii
High Profile Monument Sign (allowed for SH 130 / SH 195 / IH-35 frontage in eligible BP properties)28 ft225 sq. ft. per faceNot listedMinimum clearance requirements to electric power lines apply: 10 ft horizontally and 15 ft vertically (setback from power lines, not a general property-line setback).Per frontage: SH 130/SH 195 -> one per 600 ft (with 600 ft minimum spacing); IH-35 -> one per 600 ft of frontage or fraction thereof (with 400 ft minimum spacing)High profile monument signs are permitted on properties with SH 130, SH 195, and IH-35 frontage, which are zoned C-1, C-3, BP, or IN; must meet placement requirements tied to frontage type.Not listedUnlock10.06.030.G, 10.06.030.G.1-7
Pole Signs on Properties with IH 35 Frontage (BP)28 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listedPower line clearance applies: minimum 10 ft horizontally and 15 ft vertically (or as required by utility provider).One pole sign per 600 ft of frontage or fraction thereofPole signs are permitted on properties with IH 35 frontage and zoned C-1, C-3, BP, or IN, subject to listed requirements.Not listedUnlock10.06.030.D, 10.06.030.D.1-6
Flag25 ft40 sq. ft.Not listedMinimum setback: 5 ftNot listedFlags are permitted in all zoning districts (subject to requirements).Not listedUnlock10.06.010 (Table 10.06.010), 10.06.030.E.2, 10.06.030.E.3-4
Building WallNot listed1 sq. ft. per linear foot of primary facadeNot listedNot listedNot listedBased on building's primary entrance and building facade. May be placed on any portion of the building wall (but not directly adjacent to and within 100 ft of a residential property line within a Residential Zoning District unless the residential zoned property is developed as a Non-Residential use).Not listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN classification), 10.06.030.C
Incidental Sign2 ft4 sq. ft.Not listedMinimum setback: 5 ft (or 10 ft in the IN District, this clause applies only to IN; for BP this table row lists 5 ft)Two (2) per acre per lotIncidental signsNot listedUnlock10.06.010 (Table 10.06.010) for C-1/C-3/BP/IN/MU-DT incidental signs, 10.01.050

Local Commercial (C-1)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Monument Sign6 ftNot to exceed 48 sq. ft. per sign faceNot listedMinimum setback: 5 ft1 per 500 ft of frontage or fraction thereofFreestanding monument signNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.A.1
Low-Profile Pole Sign10 ft20 sq. ft.Not listedMinimum setback: 5 ft1 per 500 ft of frontage or fraction thereofLow-Profile Pole SignNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.A.2, 10.06.030.A.2.e.i-ii
High Profile Monument Sign (allowed for SH 130 / SH 195 / IH-35 frontage in eligible C-1 properties)28 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listedPower line clearance applies: 10 ft horizontally and 15 ft vertically (or utility-required).SH 130/SH 195: one per 600 ft (min 600 ft spacing); IH-35: one per 600 ft of frontage or fraction thereof (min 400 ft spacing)High profile monument signs permitted on properties with SH 130, SH 195, and IH-35 frontage that are zoned C-1, C-3, BP, or IN.Not listedUnlock10.06.030.G.1-7
Pole Signs on Properties with IH 35 Frontage (C-1)28 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listedPower line clearance applies: 10 ft horizontally and 15 ft vertically (or utility-required).One pole sign per 600 ft of frontage or fraction thereofPole signs permitted on properties with IH 35 frontage and zoned C-1, C-3, BP, or IN.Not listedUnlock10.06.030.D.1-6
Flag25 ft40 sq. ft.Not listedMinimum setback: 5 ftNot listedFlags (permitted in all zoning districts; subject to requirements).Not listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.E.2-4
Building WallNot listed1 sq. ft. per linear foot of primary facadeNot listedNot listedNot listedBuilding wall signs; based on primary entrance and building facade. May not be placed on any face directly adjacent to, and within 100 ft of a residential property line within a Residential Zoning District unless the residential zoned property is developed as a Non-Residential use.Not listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.C
Incidental Sign2 ft4 sq. ft.Not listedMinimum setback: 5 ftTwo (2) per acre per lotIncidental signsNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.01.050

General Commercial (C-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Monument Sign6 ftNot to exceed 48 sq. ft. per sign faceNot listedMinimum setback: 5 ft1 per 500 ft of frontage or fraction thereofFreestanding monument signNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.A.1
Low-Profile Pole Sign10 ft20 sq. ft.Not listedMinimum setback: 5 ft1 per 500 ft of frontage or fraction thereofLow-Profile Pole SignNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.A.2, 10.06.030.A.2.e.i-ii
High Profile Monument Sign (allowed for SH 130 / SH 195 / IH-35 frontage in eligible C-3 properties)28 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listedPower line clearance applies: 10 ft horizontally and 15 ft vertically (or utility-required).SH 130/SH 195: one per 600 ft (min 600 ft spacing); IH-35: one per 600 ft of frontage or fraction thereof (min 400 ft spacing)High profile monument signs permitted on properties with SH 130, SH 195, and IH-35 frontage that are zoned C-1, C-3, BP, or IN.Not listedUnlock10.06.030.G.1-7
Pole Signs on Properties with IH 35 Frontage (C-3)28 ft (additional height allowed by elevation differential determination)225 sq. ft. per faceNot listedPower line clearance applies: 10 ft horizontally and 15 ft vertically (or utility-required).One pole sign per 600 ft of frontage or fraction thereofPole signs permitted on properties with IH 35 frontage and zoned C-1, C-3, BP, or IN.Not listedUnlock10.06.030.D.1-6
Flag25 ft40 sq. ft.Not listedMinimum setback: 5 ftNot listedFlagsNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.E.2-4
Building WallNot listed1 sq. ft. per linear foot of primary facadeNot listedNot listedNot listedBuilding wall signs based on primary entrance and facade; prohibited within 100 ft of residential property line in Residential Zoning District unless the residential zoned property is developed as a Non-Residential use.Not listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.06.030.C
Incidental Sign2 ft4 sq. ft.Not listedMinimum setback: 5 ftTwo (2) per acre per lotIncidental signsNot listedUnlock10.06.010 (Table 10.06.010 for C-1/C-3/BP/IN/MU-DT), 10.01.050

PermitPal covers all 20 zoning districts in Georgetown. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Georgetown

  • All signs not expressly permitted by this Chapter are prohibited, except as approved through the appeals process established by this Code.
  • Signs, temporary or otherwise, within public rights-of-way are prohibited.
  • Signs, temporary or otherwise, affixed to a tree or utility pole are prohibited.
  • Signs, temporary or otherwise, located within the restricted area defined in Section 12.44.010 (sight triangle) are prohibited.
  • All signs not expressly permitted under this Code or exempt from regulation hereunder are prohibited within the corporate limits of the City and those areas within the extraterritorial jurisdiction (signs include, but are not limited to: beacons; portable signs; roof signs above the lesser of the height of the structure or allowable freestanding sign height within the District; inflatable signs and tethered balloons greater than 18 inches in diameter; flashing/fluttering/undulating/swinging/rotating or otherwise moving signs; billboard signs; streamers; electronic message centers in fixed or traveling mode; signs that emit an odor or produce an audible message; and unshielded neon).
  • No illuminated sign with a sign area of 150 square feet or less may have luminance greater than 300 foot-candles (including any portion within a circle two feet in diameter).
  • No illuminated sign with a sign area greater than 150 square feet may have luminance greater than 200 foot-candles for any portion within a circle of two feet in diameter.
  • No unshielded light source may be visible from the edge of the public right-of-way at a height of three feet.

Exempt Signs in Georgetown

  • Any public notice or warning required by a valid and applicable federal, state, or local law, regulation, or ordinance.
  • Any sign inside a building, not attached to a window or door, that is not legible from a distance of more than three feet beyond the lot line of the lot or parcel on which such sign is located.
  • Traffic control, service entrance, and directional signs on private property (e.g., "Stop," "Yield," "Enter," and similar signs) that do not exceed four feet in height or four square feet in area, or meet State or City standards or conform to the Manual on Uniform Traffic Control Devices.
  • Address and postbox numerals conforming to the requirements of Chapter 15.36 (Street Naming and Street Addressing) of the Code of Ordinances, as amended.
  • Government signs, including flags, erected by or for the city, county, state or federal government in furtherance of their governmental responsibility.
  • Legal notices.
  • Signs prepared by or for the local, state, or federal government marking sites or buildings of historical significance that do not exceed seven feet in height or eight square feet in area.

Source: municode municipal code