Questions? Call us at (262) 218-2915

Sign Regulations in Hill Country Village, Texas

Hill Country Village, Texas has specific sign regulations covering 18 sign types across 3 zoning districts. Regulated sign types include Real Estate Sign, Building Sign - Single Tenant, Building Sign - Multi-Tenant (Entry Sign). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hill Country Village, Texas

Sample Sign Requirements in Hill Country Village

Sign TypeMax HeightMax AreaSetback
Building Sign - Single Tenant3 feet32 square feetNot listed
Building Sign - Multi-Tenant (Entry Sign)Not listed32 square feetNot listed
Building Directory Sign - Multi-Tenant (Main Entry)Not listed24 square feetNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Hill Country VillageFull Coverage

Sign Types Covered

18

  • Real Estate Sign
  • Building Sign - Single Tenant
  • Building Sign - Multi-Tenant (Entry Sign)
  • Building Directory Sign - Multi-Tenant (Main Entry)
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hill Country Village

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Hill Country Village, the height limit for Pole Sign (Street Frontage ≥140 ft) in the B-1, B-2, B-3 zoning districts is 35 feet (Sec. 50-10(2)(d)1). Maximum sign heights range from 8 feet to 35 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hill Country Village require a permit. From the submission notes on this page: Multi-tenant businesses or property owners must either conform to the sign code requirements or submit a signage plan to be reviewed by the business district construction review board. An accepted signage plan, with or without amendments, will supersede section 50-10(1) and (2). Run a code check for an exact address to see the permit requirements for that zone.

Hill Country Village's sign code covers 18 sign types, including Real Estate Sign, Building Sign - Single Tenant, Building Sign - Multi-Tenant (Entry Sign), and Building Directory Sign - Multi-Tenant (Main Entry). Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: No fee or permit is required for a sign not exceeding one square foot of display surface on a residence, mailbox, gatepost, or gate, stating the name and address of the occupant. The full list is on this page.

In Hill Country Village, Electronic Sign (Digital Display On-Premises) in the B-1, B-2, B-3 zoning districts must be set back 25 ft from side lot line. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Hill Country Village's sign ordinance that cover digital, changing, or flashing signs: Electronic signs that advertise or promote businesses, products, activities, services, or events not located on the premises where the sign is located are prohibited. Portable electronic signs are prohibited. No electronic sign may resemble or simulate any warning signal or any traffic control device as described in the 2003 Manual on Uniform Traffic Control Devices. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Hill Country Village Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hill Country Village, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Hill Country Village, Texas Sign Rules at a Glance

Hill Country Village, Texas regulates 18 sign types across 3 zoning districts. Building Signs - Single Tenant in the B-1, B-2, B-3 zoning districts are capped at 3 feet tall and 32 square feet (Sec. 50-10(1)(a-d)). Most commercial signs in Hill Country Village require a permit.

Detailed Sign Ordinance Requirements for Hill Country Village, Texas

Sign Rules by Zoning District in Hill Country Village (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
B-1, B-2, B-31135 feet144 square feetNot listed
R-1, R-2, Residential Zoning Districts68 feet36 square feetNot listed
General Regulations For All Zones2Not listed4 square feetNot listed

Zone-by-Zone Sign Requirements in Hill Country Village

B-1, B-2, B-3

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Building Sign - Single Tenant3 feet32 square feetNot listedNot listed1 per single tenantFront of the building or occupied spaceNot listedUnlockSec. 50-10(1)(a-d)
Building Sign - Multi-Tenant (Entry Sign)Not listed32 square feetNot listedNot listed1 per tenant entranceAt tenant's entryNot listedUnlockSec. 50-10(1)(d)
Building Directory Sign - Multi-Tenant (Main Entry)Not listed24 square feetNot listedNot listed1 per main entryMain entry of multi-tenant commercial buildingNot listedUnlockSec. 50-10(1)(e)
Pole Sign (Street Frontage <140 ft)25 feet96 square feetNot listedNot listed1 per lotOn a lot with street frontage of less than 140 linear feetNot listedUnlockSec. 50-10(2)(c)1
Monument Sign (Street Frontage <140 ft)10 feetNot listed8 feetNot listed1 per lotOn a lot with street frontage of less than 140 linear feetNot listedUnlockSec. 50-10(2)(c)2
Pole Sign (Street Frontage ≥140 ft)35 feet144 square feetNot listedNot listed1 allowed (may be both pole and monument, see limitation)On a lot with street frontage of 140 linear feet or moreNot listedUnlockSec. 50-10(2)(d)1
Monument Sign (Street Frontage ≥140 ft)16 feetNot listed8 feetNot listed1 allowed (may be both pole and monument, see limitation)On a lot with street frontage of 140 linear feet or moreNot listedUnlockSec. 50-10(2)(d)2
Electronic Sign (Digital Display On-Premises)Not listedTotal signage on lot must comply with general signage limitsNot listed25 ft from side lot line; if on pole/monument, within 25 ft of access road curb1 per lotOn-premises; at least 25 ft from side lot line; if on pole/monument must be within 25 ft of San Pedro/Highway 281 access road curbNot listedUnlockSec. 50-9; Sec. 50-10(5),(6)

R-1, R-2, Residential Zoning Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Occupant SignNot listed1 square footNot listedNot listedNot listedResidence, mailbox, gatepost, or gateNot listedUnlockSec. 50-8(1)
Political Sign (Private Property)8 feet36 square feetNot listedNot listedNot listedPrivate property with owner's consentNot listedUnlockSec. 50-8(4)
Political Sign (Public Right-of-Way)Not listedNot listedNot listedNot listedNot listedPublic right-of-way in residential districts with permission from adjacent property ownerNot listedUnlockSec. 50-8(4)
Public Interest SignNot listed4 square feetNot listedNot listedNot listedResidential property or public right-of-way (permission required)Not listedUnlockSec. 50-8(4)
Real Estate SignNot listedNot listedNot listedNot listedNot listedOn the property to which it refersNot listedUnlockSec. 50-8(5)
Construction Site Contractor SignNot listed4 square feetNot listedNot listedNot listedAt construction siteNot listedUnlockSec. 50-8(3)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Utility Company SignNot listed4 square feetNot listedNot listed1 per locationAt utility locationNot listedUnlockSec. 50-8(2)
Sign - All Types (General Construction)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlockSec. 50-12

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Hill Country Village with a free PermitPal account.

Run a free code check

Prohibited Signs in Hill Country Village

  • No person shall construct, install or alter any sign without first obtaining a permit from the city administrator or designee, except as otherwise exempted.
  • No person shall place, attach, paint, write, stamp, paste, staple, or tape any sign, advertisement, or other matter upon any lamp post, electric light, telephone, shade tree, fire hydrant, fence post, or on any bridge, pavement, sidewalk or crosswalk, public building, public right-of-way or on any property or thing belonging to the city, or on any article or thing within any park, except for public officers for public purposes and temporary political, public interest, and residential real estate signs on stakes in the public right-of-way as regulated elsewhere.
  • No sign shall interfere with any fire hydrant, traffic light, traffic or street sign, or street light.
  • No sign shall be erected in any location where, by reason of traffic conditions, fire or explosion hazards, it would imperil safety or interfere with fire department functions.
  • No person shall place, attach, paint, write, stamp, paste, staple, or tape any sign, advertisement, or other matter upon any building, structure, wall, fence, gate post, or gate without the written permission of the owner, agent, or occupant, and without complying with this ordinance.
  • No sign shall be so located as to obstruct visibility of an adjoining business' sign to traffic on the street on which the adjoining business fronts.
  • The lowest part of a sign projecting over a sidewalk or path used by the public shall not be less than nine feet above the grade of the sidewalk or path.
  • No sign shall project from any door or window-casing.
  • No sign shall be placed so as to obstruct or interfere with a window, doorway, or other means of egress, nor be supported or hung from any fire escape.
  • No sign may be placed so as to interfere with the sight line of traffic from one location on a public street to another location on the same street or from a location on a public street or private drive which intersects with a public street to a location on the intersecting public street within 150 feet of the intersection.
  • All signs must be securely fastened or anchored to their foundation or structure to resist dead weight and wind loads.
  • The use of staples, wires, and wood plugs in creating signs is prohibited, except for cardboard political and public interest signs stapled to ground stakes.
  • Signs illuminated by electricity must conform to all applicable codes.
  • All signs, regardless of type or location, must be installed to provide a high safety factor, and all reasonable installation and upkeep precautions must be taken.
  • If a sign becomes a hazard to public safety, its permit may be revoked and it must be removed immediately by the owner.
  • Signs may not encroach on or project over public property or a public right-of-way.
  • Electronic signs that advertise or promote businesses, products, activities, services, or events not located on the premises where the sign is located are prohibited.
  • Portable electronic signs are prohibited.
  • No electronic sign may resemble or simulate any warning signal or any traffic control device as described in the 2003 Manual on Uniform Traffic Control Devices.
  • The use of sound in electronic signs is prohibited.
  • Any violation of the ordinance immediately terminates the right to maintain a nonconforming sign.

Exempt Signs in Hill Country Village

  • No fee or permit is required for a sign not exceeding one square foot of display surface on a residence, mailbox, gatepost, or gate, stating the name and address of the occupant.
  • No fee or permit is required for signs or markers of a utility holding a city franchise and directly connected with the business of such public utility, provided such signs do not exceed four square feet, and only one is allowed per location.
  • No fee or permit is required for nonilluminated signs not exceeding four square feet each placed at a construction site advertising the contractor and subcontractors on the job.
  • No fee or permit is required for political signs and public interest signs, in residential zoning districts, placed in the public right-of-way with the adjacent property owner's permission. Nonilluminated political signs (max. 36 square feet, max. 8 feet high, no moving elements) may be placed on private property with owner consent without a permit or fee. Public interest signs may be erected no more than five days before the event and must be removed no later than one day after the event.
  • No fee or permit is required for real estate signs.

Sign Plan & Submission Notes for Hill Country Village

  • Multi-tenant businesses or property owners must either conform to the sign code requirements or submit a signage plan to be reviewed by the business district construction review board. An accepted signage plan, with or without amendments, will supersede section 50-10(1) and (2).
  • Signage plans submitted by multi-tenant businesses are subject to review and approval by the business district construction review board, which may accept the plan as-is or with amendments agreed upon by the applicant.
  • Variance applications must be made on forms provided by the city administrator and must include the application for a sign permit, stating reasons for the variance, and 15 color copies showing the proposed sign with dimensions, height, and location clearly indicated.
  • Variance applications are reviewed by the business district construction review board, and any dissatisfied applicant may appeal to the city council; the council determination is final.

Source: municode municipal code