Sign Regulations in Montgomery, Texas

Montgomery, Texas has specific sign regulations covering 33 sign types across 7 zoning districts. Regulated sign types include Temporary real estate sign (single-family unit), Temporary direction signs (special event civic interest), Temporary political signs. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Montgomery, Texas

Sample Sign Requirements in Montgomery

Sign TypeMax HeightMax AreaSetback
Home occupation sign (residential)Not exceeding two (2) square feet
Residential subdivision permanent identification sign (major entrance)Not exceeding eight (8) feet above the average finished gradeTotal surface area at each entrance not exceeding sixty-four (64) square feet
Temporary real estate sign (single-family unit)Not more than five (5) feet over the natural ground levelNot exceeding six (6) square feet

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for MontgomeryFull Coverage

Sign Types Covered

33

  • Temporary real estate sign (single-family unit)
  • Temporary direction signs (special event civic interest)
  • Temporary political signs
  • Temporary garage sale signs
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Montgomery

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

Sign height limits in Montgomery vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Montgomery, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Montgomery, regulated sign types include Temporary real estate sign (single-family unit), Temporary direction signs (special event civic interest), Temporary political signs, Temporary garage sale signs, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Montgomery vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Montgomery are regulated with specific requirements for brightness, animation, and message duration. Montgomery has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Montgomery Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Montgomery, Texas sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Montgomery, Texas Sign Rules at a Glance

Montgomery, Texas regulates 33 sign types across 7 zoning districts. Multi-family permanent sign (multiple dwelling units)s in the R-2 (Multifamily residential district) zoning district are capped at If ground-mounted: top shall not be more than five (5) feet over the natural ground level; if building-mounted: not flush-mounted and shall not project above the roofline tall and Total sign area not more than thirty-two (32) square feet (Sec. Sec. 66-53(m)(2)). Most commercial signs in Montgomery require a permit.

Detailed Sign Ordinance Requirements for Montgomery, Texas

Sign Rules by Zoning District in Montgomery (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
R-1 (Single-family residential district)18Not exceeding eight (8) feet above the average finished gradeTotal surface area at each entrance not exceeding sixty-four (64) square feet
R-2 (Multifamily residential district)19Not exceeding eight (8) feet above the average finished gradeTotal surface area at each entrance not exceeding sixty-four (64) square feet
B (Commercial district)2210 ft or lessNot to exceed sixty-four (64) square feet in area, including frame
ID (Industrial district)1910 ft or lessNot to exceed sixty-four (64) square feet in area, including frame
I (Institutional district)17Freestanding signs: maximum height eight (8) feetNot to exceed sixty-four (64) square feet in area, including frame
PD (Planned development district)5No more than eight (8) feet highNo sign may have effective area greater than thirty-six (36) square feet
General Regulations For All Zones16Freestanding signs: maximum height eight (8) feetNot to exceed sixty-four (64) square feet in area, including frame

Zone-by-Zone Sign Requirements in Montgomery(sample of 3 of 7 zones)

R-2 (Multifamily residential district)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Multi-family permanent sign (multiple dwelling units)If ground-mounted: top shall not be more than five (5) feet over the natural ground level; if building-mounted: not flush-mounted and shall not project above the rooflineTotal sign area not more than thirty-two (32) square feetPermitted anywhere on the premises except as restricted by this section; for multiple dwelling unitsUnlockSec. 66-53(m)(2)
Residential subdivision permanent identification sign (major entrance)Not exceeding eight (8) feet above the average finished gradeTotal surface area at each entrance not exceeding sixty-four (64) square feetAt each major entranceUnlockSec. 66-53(m)(1)
Temporary real estate sign (single-family unit)Not more than five (5) feet over the natural ground levelNot exceeding six (6) square feetAnywhere on the premises except as restricted by this section; may not project beyond the property lineUnlockSec. 66-53(c)(1)
Temporary real estate sign (commercial property)Not more than five (5) feet over the natural ground levelNot exceeding thirty-two (32) square feetAnywhere on the premises except as restricted by this section; may not project beyond the property lineUnlockSec. 66-53(c)(2)
Temporary direction signs (special event civic interest)Not to exceed sixteen (16) square feet in areaOn private property with permission of the property owner; not on a public right-of-way without consent of the city councilUnlockSec. 66-53(f)(1)-(3)
Temporary political signsNo more than eight (8) feet highNo sign may have effective area greater than thirty-six (36) square feetOn private property with consent of the property ownerUnlockSec. 66-53(g)(1)-(4)
Temporary signs (residential developments under construction)Freestanding signs: maximum height eight (8) feetNot to exceed sixty-four (64) square feet in area, including frameFreestanding signs must be at least twenty (20) feet from the street right-of-way; any building-attached sign cannot be higher than the rooflineUnlockSec. 66-53(e)(1)-(3)
Temporary sign (residential developments under construction)Freestanding signs: maximum height eight (8) feetNot to exceed sixty-four (64) square feet in area, including frameFreestanding signs must be located at least twenty (20) feet from the street right-of-way; any sign attached to a building cannot be higher than the rooflineUnlockSec. 66-53(e)(1)-(3)

B (Commercial district)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall signFlat wall signs permitted for each business utilizing up to 60 percent of the total feet of wall areaMust be located on the site where the goods or services are offered; must not project above the rooflineUnlockSec. 66-53(n)(1)a-b
Freestanding sign (Table A; monument type) - frontage conditionsResidential/multifamily frontage not on specified highways: 4 ft; Residential/multifamily frontage on specified highways: 6 ft; Nonresidential frontage not on specified highways: 6 ft; Nonresidential frontage on specified highways: 10 ftMaximum effective area depends on frontage and land use: Residential/multifamily frontage not on specified highways: 36 sq ft; Residential/multifamily frontage on specified highways: 60 sq ft; Nonresidential frontage not on specified highways: 60 sq ft; Nonresidential frontage on specified highways: 100 sq ftFreestanding; must comply with setback and spacing requirements; must have street address printed on framework; monument type appearance required (solid mass such as cylinder/block/rectangle/square)UnlockSec. 66-53(n)(2)a-e; TABLE A
Temporary freestanding sign (Type I)10 ft or lessEffective area 32 sq ft or lessMust comply with setback and spacing requirements for freestanding signs for that premisesUnlockSec. 66-53(n)(2)f(1)-(5)
Off-premises sign (freestanding)Maximum height: use Table A limits for freestanding signsMaximum effective area: use Table A limits for freestanding signsFreestanding off-premises signUnlockSec. 66-53(n)(2)b and (n)(2)d
Temporary real estate sign (single-family unit)Not more than five (5) feet over the natural ground levelNot exceeding six (6) square feetAnywhere on the premises except as restricted by this section; may not project beyond the property lineUnlockSec. 66-53(c)(1)
Temporary real estate sign (commercial property)Not more than five (5) feet over the natural ground levelNot exceeding thirty-two (32) square feetAnywhere on the premises except as restricted by this section; may not project beyond the property lineUnlockSec. 66-53(c)(2)
Temporary sign (developments other than residential subdivisions under construction)Freestanding signs: maximum height eight (8) feetNot to exceed sixty-four (64) square feet in area, including frameFreestanding signs must be located at least twenty (20) feet from the street right-of-way; any sign attached to a building cannot be higher than the rooflineUnlockSec. 66-53(d)(1)-(2) and (d)(3)
Temporary political signsNo more than eight (8) feet highNo sign may have effective area greater than thirty-six (36) square feetOn private property with consent of the property ownerUnlockSec. 66-53(g)(1)-(4)

ID (Industrial district)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall sign (commercial-area standards applied)Flat wall signs permitted for each business utilizing up to 60 percent of the total feet of wall areaMust be located on the site where the goods or services are offered; must not project above the rooflineUnlockSec. 66-53(n)(1)a-b and Sec. 66-53(o)(2)
Freestanding sign (commercial-area standards applied; Table A)Residential/multifamily frontage not on specified highways: 4 ft; Residential/multifamily frontage on specified highways: 6 ft; Nonresidential frontage not on specified highways: 6 ft; Nonresidential frontage on specified highways: 10 ftMaximum effective area depends on frontage and land use: Residential/multifamily frontage not on specified highways: 36 sq ft; Residential/multifamily frontage on specified highways: 60 sq ft; Nonresidential frontage not on specified highways: 60 sq ft; Nonresidential frontage on specified highways: 100 sq ftFreestanding; must comply with street address requirement, setback and spacing, and monument-type appearanceUnlockSec. 66-53(n)(2)a-e; TABLE A and Sec. 66-53(o)(2)
Electronic message display signs (LED/plasma/other)Industrial zoning districtsUnlockSec. 66-53(s)(1)-(7)
Temporary freestanding sign (Type I)10 ft or lessEffective area 32 sq ft or lessMust comply with setback and spacing requirements for freestanding signs for that premisesUnlockSec. 66-53(n)(2)f(1)-(5)
Temporary real estate sign (single-family unit)Not more than five (5) feet over the natural ground levelNot exceeding six (6) square feetAnywhere on the premises except as restricted by this section; may not project beyond the property lineUnlockSec. 66-53(c)(1)
Temporary sign (developments other than residential subdivisions under construction)Freestanding signs: maximum height eight (8) feetNot to exceed sixty-four (64) square feet in area, including frameFreestanding signs must be located at least twenty (20) feet from the street right-of-way; any sign attached to a building cannot be higher than the rooflineUnlockSec. 66-53(d)(1)-(2) and (d)(3)
Temporary direction signs (special event civic interest)Not to exceed sixteen (16) square feet in areaOn private property with permission of the property owner; not on a public right-of-way without consent of the city councilUnlockSec. 66-53(f)(1)-(3)
Temporary political signsNo more than eight (8) feet highNo sign may have effective area greater than thirty-six (36) square feetOn private property with consent of the property ownerUnlockSec. 66-53(g)(1)-(4)

PermitPal covers all 7 zoning districts in Montgomery — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 7 zones for Montgomery — start free

Prohibited Signs in Montgomery

  • Signs or billboards off-premises from the location of the subject of the advertising content, with the exception of city-approved community commercial signs.
  • Signs which advertise an activity, business or service no longer conducted on the premises upon which the sign is located.
  • Signs which move or contain visible moving parts (except moving message boards).
  • Signs which contain or have attached thereto posters, ribbons, streamers, strings of light bulbs or other similar devices.
  • Banners and pennants of any kind, other than those permitted for grand opening and store closing events or bona fide special announcements (displayed for 30 days or less).
  • Signs which contain statements, words, or pictures of an obscene, indecent or immoral character which reasonably offend public morals or decency.
  • Signs or portions thereof which are located on or project or extend over any public sidewalk, street, alley or other public property (signs required or authorized by governmental authority are exempted from this provision).
  • Signs which constitute a hazard to pedestrian or vehicular traffic, or which may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal or device.
  • Signs which make use of any word, phrase, symbol or character in such manner as to interfere with, mislead or confuse vehicular traffic.
  • Portable or wheeled signs.
  • Signs with flashing, blinking or traveling lights, other than as provided in section 66-53(s) of the Code.
  • Signs attached to or located upon exposed amenities such as benches, trash containers or fences.
  • Signs placed on the side or rear of any building or property when such sign faces upon a contiguous residential area.
  • Roof signs that extend more than 24 inches above the highest point of the roof.
  • Leader signs, with the exception of city-approved sidewalk signs.
  • Hand-made signs (all signs must be professionally produced).

Exempt Signs in Montgomery

  • Display of the flag of the United States, the State of Texas, or any political subdivision.

Sign Permit Fees & Timelines in Montgomery

ItemDetailsCitation
All sign permitssubject to a fine as provided in section 1-13.
See all Montgomery sign permit fees & timelines — start free

Source: municode municipal code