Sign Regulations in Palmview, Texas
Palmview, Texas has specific sign regulations covering 25 sign types across 7 zoning districts. Regulated sign types include Subdivision Sign, Accessory Sign, Canopy Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 20, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Palmview, Texas
Sample Sign Requirements in Palmview
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Real Estate Sign | 15 ft | 32 sq ft | 5 ft min from property line |
| Political Sign | 15 ft | Not listed | 5 ft min from property line |
| Construction Sign | 15 ft | 32 sq ft | 5 ft min from property line |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
25
- Subdivision Sign
- Accessory Sign
- Canopy Sign
- Changeable Copy Sign
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Texas
Frequently Asked Questions
In Palmview, the height limit for Ground/Tenant Sign in the Expressway Corridor and Secondary Arterial Corridor Districts is 80 ft (Sec. 153.039(A)(6)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Palmview require a permit. From the submission notes on this page: Before a permit is granted (except for temporary signs), a design and stress diagram or plan containing design and stress specifications must be submitted to the Building Official (§153.056). Run a code check for an exact address to see the permit requirements for that zone.
Palmview's sign code covers 25 sign types, including Subdivision Sign, Accessory Sign, Canopy Sign, and Changeable Copy Sign. Most commercial signs need a permit. The ordinance lists 17 exemptions. One of them: Home occupation signs, provided there is an approved conditional use permit (§153.021). The full list is on this page.
In Palmview, Ground/Tenant Sign in the Neighborhood Commercial District and Office Building District (C-1, C-2) must be set back 5 ft (Sec. 153.037(A)(5)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Palmview's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Palmview Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Palmview, Texas, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Palmview, Texas Sign Rules at a Glance
Palmview, Texas regulates 25 sign types across 7 zoning districts. Directory Signs in the Expressway Corridor and Secondary Arterial Corridor Districts are capped at 20 ft tall and 40 sq ft, with a 5 ft setback (Sec. 153.039(A)(4)). Most commercial signs in Palmview require a permit.
Detailed Sign Ordinance Requirements for Palmview, Texas
Sign Rules by Zoning District in Palmview (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Agricultural Open-Interim and Agricultural Open Permanent Districts | 4 | 15 ft | 32 sq ft | Not listed |
| Residential districts | 5 | 10 ft | 32 sq ft per side of entrance | Not listed |
| Neighborhood Commercial District and Office Building District (C-1, C-2) | 14 | 40 ft | 100 sq ft | Not listed |
| General Business, Heavy Commercial and Industrial Districts (C-3, C-4, I) | 14 | 50 ft (60 ft if within 1,200 ft of expressway corridor and on state road) | 500 sq ft (10% of wall face) | Not listed |
| Expressway Corridor and Secondary Arterial Corridor Districts | 18 | 80 ft | 800 sq ft (max 4 faces) | Not listed |
| Public Zone District | 12 | 30 ft | 64 sq ft | Not listed |
| General Regulations For All Zones | 1 | Not listed | 1 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Palmview(sample of 3 of 7 zones)
Neighborhood Commercial District and Office Building District (C-1, C-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Accessory Sign | 10 ft | 15 sq ft | Not listed | 5 ft from all property lines | Not listed | Not listed | Not listed | Unlock | §153.037(A)(1) |
| Changeable Copy Sign | 20 ft | 100 sq ft | Not listed | 5 ft | Not listed | Not listed | Not listed | Unlock | §153.037(A)(3), §153.020 |
| Directory Sign | 20 ft | 40 sq ft | Not listed | 5 ft | Not listed | Not listed | Not listed | Unlock | §153.037(A)(4) |
| Ground/Tenant Sign | 40 ft | 32 sq ft | Not listed | 5 ft | 1 per site | Not listed | Not listed | Unlock | §153.037(A)(5) |
| Subdivision Sign | 10 ft | 32 sq ft per side of entrance | Not listed | Not listed | Not listed | Attached to fence or wall at entrance to subdivision | Not listed | Unlock | §153.037(A)(6) |
| Wall Sign | Not listed | 32 sq ft | Not listed | Not listed | 2 per site | Attached or painted on wall or fence | Not listed | Unlock | §153.037(A)(7) |
| Construction Sign (Temporary) | 10 ft | 32 sq ft | Not listed | 5 ft | 1 per site | Not listed | Not listed | Unlock | §153.037(B)(2) |
| Real Estate Sign (Temporary) | 10 ft | 32 sq ft | Not listed | 5 ft | 1 per site | Not listed | Not listed | Unlock | §153.037(B)(5) |
General Business, Heavy Commercial and Industrial Districts (C-3, C-4, I)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Accessory Sign | 10 ft | 20 sq ft | Not listed | 5 ft from property lines | Not listed | Not listed | Not listed | Unlock | §153.038(A)(1) |
| Changeable Copy Sign | 20 ft | 100 sq ft | Not listed | 5 ft | Not listed | Not listed | Not listed | Unlock | §153.038(A)(3) |
| Directory Sign | 20 ft | 40 sq ft | Not listed | 5 ft | Not listed | Not listed | Not listed | Unlock | §153.038(A)(4) |
| Ground/Tenant Sign | 50 ft (60 ft if within 1,200 ft of expressway corridor and on state road) | 200 sq ft per face | Not listed | 5 ft | 1 per site | Multi-unit complexes: max 200 sq ft per tenant sign. | Not listed | Unlock | §153.038(A)(5) |
| Marquee Sign | Not listed | 32 ft (length) x 8 ft (width) | 8 ft | Not listed | 1 per site | Attached to marquee | Not listed | Unlock | §153.038(A)(6) |
| Subdivision Sign | 10 ft | 40 sq ft per side of entrance | Not listed | Not listed | Not listed | Attached to fence or wall at entrance | Not listed | Unlock | §153.038(A)(7) |
| Wall Sign | Not listed | 500 sq ft (10% of wall face) | Not listed | Not listed | 4 per premises | Attached or painted to wall | Not listed | Unlock | §153.038(A)(8) |
| Construction Sign (Temporary) | 10 ft | 40 sq ft | Not listed | 5 ft | 1 per project/development | Not listed | Not listed | Unlock | §153.038(B)(2) |
Expressway Corridor and Secondary Arterial Corridor Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Accessory Sign | 18 ft | 60 sq ft | Not listed | 5 ft min | Not listed | Not listed | Not listed | Unlock | §153.039(A)(1) |
| Changeable Copy Sign | 60 ft | 484 sq ft | Not listed | 5 ft | Not listed | Not listed | Not listed | Unlock | §153.039(A)(3) |
| Directory Sign | 20 ft | 40 sq ft | Not listed | 5 ft | Not listed | Not listed | Not listed | Unlock | §153.039(A)(4) |
| Ground/Tenant Sign | 80 ft | 800 sq ft (max 4 faces) | Not listed | 5 ft | 1 per site | Not listed | Not listed | Unlock | §153.039(A)(6) |
| Marquee Sign | Not listed | 32 ft (length) x 8 ft (width) | 8 ft | Not listed | 1 per site | Attached to marquee | Not listed | Unlock | §153.039(A)(7) |
| Construction Sign (Temporary) | 10 ft | 40 sq ft | Not listed | 5 ft | 1 per project/development | Not listed | Not listed | Unlock | §153.039(B)(2) |
| Political Sign (Temporary) | 8 ft | 32 sq ft | Not listed | Not listed | 1 per site | Anywhere on property | Not listed | Unlock | §153.039(B)(3) |
| Real Estate Sign (Temporary) | 10 ft | 40 sq ft | Not listed | 5 ft | 1 per site | Not listed | Not listed | Unlock | §153.039(B)(5) |
PermitPal covers all 7 zoning districts in Palmview. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Palmview
- It is unlawful to display, erect, relocate, rebuild, reconstruct, or alter any sign without first filing an application for and obtaining a sign permit from the city, except for temporary signs (§153.070).
- No more than two permanent signs shall be allowed on one lot, except lots with double frontage, which may have three permanent signs, with at least one sign on each frontage (§153.004).
- No site may utilize more than three different types of signs, excluding temporary and exempted signs (§153.004).
- Signs shall not create a nuisance to other properties due to size, height, brightness, or movement (§153.004).
- Signs shall be in harmony with building, neighborhood, or other area signs, except as otherwise noted (§153.004).
- No sign shall be allowed within a triangular corner clip area at street intersections, as described (§153.004).
- No sign shall be placed in the public right-of-way without prior City Council approval, and such signs are subject to annual reassessment, potential removal, permit fees, and a hold harmless agreement (§153.004).
- Searchlights may only be allowed on a temporary basis and may not create traffic hazards or risk traffic safety (§153.004).
- It is unlawful to leave or place any advertisement, ribbons, balloons, or similar items on trees, fences, street signs, public right-of-way, city property, or against any telephone or electric light pole (§153.007).
- It is unlawful to erect or maintain any sign not included under permitted sign types for the relevant zoning district (§153.022).
- Prohibited signs include: signs resembling official traffic signs/signals or bearing words like 'Stop', 'Go Slow', 'Caution', 'Danger', unless placed by governmental authority (§153.022); signs placed on trees, rocks, natural features, or utility poles; signs blocking other signs, fire escapes, exit doors, or windows (§153.022); signs emitting sound, smoke, or steam; signs erected or placed within the public right-of-way (§153.022); obsolete, damaged, non-compliant, out-of-date, defunct business, or non-permitted signs (§153.022); signs not in good repair (e.g., broken, faded, missing letters) (§153.022); and signs not securely fixed as per Building Code (§153.022).
- Non-conforming signs may not be repaired or renovated to enlarge or increase the structure, and normal maintenance is not considered repair (§153.023).
- Private signs are never allowed to project into public right-of-way (§153.056).
Exempt Signs in Palmview
- Signs not exceeding two square feet in area and bearing only property numbers, post box numbers, or names of occupants on the premises (§153.001, definition of SIGN - exclusions).
- Flags and insignia of any government, except when displayed in connection with a commercial promotion (§153.001, definition of SIGN - exclusions).
- Public signs of a public or non-commercial nature, including community service information, transit service information, utility information, safety, danger, trespassing, scenic or historical interest, and all signs erected by public officers in the performance of duty (§153.001, definition of SIGN - exclusions).
- Integral decorative or architectural building features, except for letters, trademarks, moving parts, or lights (§153.001, definition of SIGN - exclusions).
- Signs fully located within interior of any building or stadium, or within an enclosed lobby or court, or signs within theater lobbies/courts/entrances intended solely for information relating to internal operation (§153.001, definition of SIGN - exclusions).
- Memorial plaques, grave markers, statues, and other non-commercial remembrances (§153.001, definition of SIGN - exclusions).
- Home occupation signs, provided there is an approved conditional use permit (§153.021).
- Temporary political signs (§153.021).
- Temporary real estate signs (§153.021).
- Window signs (§153.021).
- Construction signs (§153.021).
- Signs placed on motor vehicles (§153.021).
- Signs directing and guiding traffic (§153.021).
- Yard sale signs (no such sign may be placed on utility poles or in public rights-of-way; must be immediately removed after sale) (§153.021).
- Gasoline price signs (§153.021).
- Street banner signs over a public right-of-way for a limited time, with permission from City Manager and Police Chief (§153.021).
- Any other temporary sign that the Planning Director determines it would be unreasonable to require a permit for (§153.021).
Sign Plan & Submission Notes for Palmview
- Every application for a sign permit must be accompanied by a plan or plans drawn to scale of the proposed sign and all existing signs maintained on the premises (§153.071). Required elements include: dimensions of the sign and wall, supporting members, max/min height, sign location in relation to the building and property boundaries, other signs/buildings on property, owner/contact info, legal/property descriptions, related electrical permit application, valuation, and contractor license numbers.
- Before a permit is granted (except for temporary signs), a design and stress diagram or plan containing design and stress specifications must be submitted to the Building Official (§153.056).
- Permit applications are reviewed and must be approved or denied within ten working days after all required data is submitted (§153.070).
- Signs requiring site plan approval by the Planning and Zoning Commission: wall signs over 500 square feet but within 10% of wall face (expressway corridor and secondary arterials) (§153.039)(A)(10)(a); billboard signs with LED lights/electronics/motorization (expressway corridor/secondary arterial corridor) (§153.039)(C)(2)(e).
- Variance or appeal procedures: applicants disagreeing with any decision (disapproval, interpretation, application of ordinance, etc.) may appeal to the Zoning Board of Adjustment for a public hearing; ZBA can grant special variances and modifications to requirements (§153.005).