Sign Regulations in Plainview, Texas
Plainview, Texas has specific sign regulations covering 11 sign types across 8 zoning districts. Regulated sign types include Billboard, Wall Sign, Banner Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 9, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Plainview, Texas
Sample Sign Requirements in Plainview
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | Not listed | 50 square feet if less than 25 feet of linear street frontage | Not listed |
| Bulletin Board | Not listed | 12 square feet | Not listed |
| Temporary Sign | 4 feet if detached | 6 square feet if detached | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
11
- Billboard
- Wall Sign
- Banner Sign
- Bulletin Board
- +2 more types
Zoning Districts
8
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
Other Cities in Texas
Frequently Asked Questions
In Plainview, the height limit for Pole Sign in the Nonresidential and Mixed Use Districts (CU, DT, MU, NC, GC, LI, HI) is 36 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Plainview require a permit. From the submission notes on this page: A master sign program application shall set out a master plan for signage for an entire parcel or parcels proposed for development. Run a code check for an exact address to see the permit requirements for that zone.
Plainview's sign code covers 11 sign types, including Billboard, Wall Sign, Banner Sign, and Bulletin Board. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Signage carried by people. The full list is on this page.
We haven't published Plainview's sign setback rules on this page yet. Run a code check for an exact address to see them.
Rules in Plainview's sign ordinance that cover digital, changing, or flashing signs: Animated or moving signs, including any moving, swinging, rotating, flashing, blinking, scintillating, fluctuating, or otherwise animated light or appendage, are prohibited. Flashing lights are prohibited except as part of holiday displays or electronic signs. Run a code check for an exact address to see the rules for that zone.
Ready to Research Plainview Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Plainview, Texas, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Plainview, Texas Sign Rules at a Glance
Plainview, Texas regulates 11 sign types across 8 zoning districts. Banner Signs in the Rural and Residential Districts (RA, SR, MR, MF, MH) are capped at 6 feet tall and 60 square feet. Most commercial signs in Plainview require a permit.
Detailed Sign Ordinance Requirements for Plainview, Texas
Sign Rules by Zoning District in Plainview (8 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 4 | 4 feet if detached | 50 square feet if less than 25 feet of linear street frontage | Not listed |
| Downtown (DT) | 1 | Not listed | 6 square feet | Not listed |
| Rural and Residential Districts (RA, SR, MR, MF, MH) | 2 | 6 feet | 60 square feet | Not listed |
| Nonresidential and Mixed Use Districts (CU, DT, MU, NC, GC, LI, HI) | 6 | 36 feet | 50 square feet if less than 25 feet of linear street frontage | Not listed |
| College and University (CU) | 1 | 35 feet | Not listed | Not listed |
| General Commercial (GC) | 1 | 35 feet | Not listed | Not listed |
| Light Industrial (LI) | 1 | 35 feet | Not listed | Not listed |
| Heavy Industrial (HI) | 1 | 35 feet | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Plainview(sample of 3 of 8 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 50 square feet if less than 25 feet of linear street frontage | Not listed | Not listed | 1 per building facade | Building facade | Not listed | Unlock | Table 14.08.007. Permanent Sign Standards |
| Bulletin Board | Not listed | 12 square feet | Not listed | Not listed | 1 per principal public entrance | Attached to building walls | Not listed | Unlock | § 14.08.002(b)(1) |
| Temporary Sign | 4 feet if detached | 6 square feet if detached | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 14.08.002(b)(3) |
| Applied Wall Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 14.08.002(b)(4) |
Rural and Residential Districts (RA, SR, MR, MF, MH)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 2 square feet | Not listed | Not listed | 1 per building facade | Building facade | Not listed | Unlock | Table 14.08.007. Permanent Sign Standards |
| Banner Sign | 6 feet | 60 square feet | Not listed | Not listed | 1 double-faced, or 2 single-faced, signs per auto access to a development | Auto access to a development | Not listed | Unlock | Table 14.08.008. Temporary Sign Standards |
Nonresidential and Mixed Use Districts (CU, DT, MU, NC, GC, LI, HI)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 50 square feet if less than 25 feet of linear street frontage | Not listed | Not listed | One sign for each side a building faces a public street | Building facade | Not listed | Unlock | Table 14.08.007. Permanent Sign Standards |
| Pole Sign | 36 feet | Not listed | 18 feet | Not listed | 1 per building | Building | Not listed | Unlock | Table 14.08.007. Permanent Sign Standards |
| Monument Sign | 10 feet | Not listed | 24 feet | Not listed | 1 per building | Building | Not listed | Unlock | Table 14.08.007. Permanent Sign Standards |
| Banner Sign | 18 feet | 1 square foot per linear foot of street frontage, not to exceed 150 square feet | Not listed | Not listed | 1 per 600 linear feet of street frontage | Street frontage | Not listed | Unlock | Table 14.08.008. Temporary Sign Standards |
| Flag Sign | 12 feet | Not listed | Not listed | Not listed | Maximum of 5 | Not listed | Not listed | Unlock | Table 14.08.008. Temporary Sign Standards |
| Stake Sign | 4 feet | 9 square feet | Not listed | Not listed | Maximum of 5 | Not listed | Not listed | Unlock | Table 14.08.008. Temporary Sign Standards |
PermitPal covers all 8 zoning districts in Plainview. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Plainview
- No sign shall be approved or disapproved based on the content or message it displays.
- Text or graphics of an indecent or immoral nature that is harmful to minors under state or federal law are prohibited.
- Text or graphics that advertise unlawful activity are prohibited.
- Text or graphics that are obscene, fighting words, defamation, incitement to imminent lawless action, or true threats are prohibited.
- Text or graphics that present a clear and present danger due to their potential confusion with traffic-control signs are prohibited.
- Signs that provide false information related to public safety are prohibited.
- Animated or moving signs, including any moving, swinging, rotating, flashing, blinking, scintillating, fluctuating, or otherwise animated light or appendage, are prohibited.
- Portable signs are prohibited except as specifically permitted.
- All off-site advertising is prohibited except for specific temporary signage and nonconforming signs.
- Flags, banners, or comparable elements designed to move in the wind are prohibited except flags attached to flagpoles.
- Flashing lights are prohibited except as part of holiday displays or electronic signs.
- Motor vehicles used as signs are prohibited unless they meet specific operational criteria.
- Semi-trailers, shipping containers, or portable storage units used as signs are prohibited unless they meet specific criteria.
- Spinning or moving parts are prohibited.
- Unshielded bare light bulbs larger than C9 format or brighter than 50 lumens per bulb are prohibited.
- Materials with a high degree of specular reflectivity are prohibited.
- Signs shall not obstruct building ingress or egress, sidewalks, driveways, alleys, equipment, structures, or architectural elements related to public safety, building operations, or utility service.
- Signs shall not obstruct visibility to any traffic-control device or street sign from traffic lanes.
- Signs shall not obstruct a driver’s ability to safely see all vehicular and pedestrian traffic.
- Signs shall not be located in or over public rights-of-way except under specific conditions.
Exempt Signs in Plainview
- Signage affixed to or painted on vehicles.
- Signage carried by people.
- Signage posted by the city on property owned, leased, or licensed by the city.
- Signage posted by governmental entities that are not subject to city jurisdiction, located on property owned, leased, or licensed by the governmental entity.
- Signage regulated by law or regulation in furtherance of the performance of a public duty or function.
Sign Plan & Submission Notes for Plainview
- A master sign program is applicable to a single-tenant development that exceeds 25,000 square feet of gross floor area or a multi-tenant development that exceeds 10,000 square feet of gross floor area in specific zoning districts.
- The administrator may approve a master sign program for a multi-tenant or mixed use development if it results in a substantially improved, comprehensive, and unified proposal.
- Master sign programs may deviate from the standards of the chapter in terms of types and numbers of signs allowed, maximum sign area, and materials and illumination standards.
- A master sign program application shall set out a master plan for signage for an entire parcel or parcels proposed for development.
- An approved master sign program shall expire two years from the date of approval if no progress has been made towards completion of the project.