Sign Regulations in Richwood, Texas
Richwood, Texas has specific sign regulations covering 10 sign types across 1 zoning districts. Regulated sign types include Ground Sign (constructed entirely of wood outside fire district), Ground Sign (with sheet metal or other noncombustible facing in fire district), Roof Sign (tight or solid surface). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Richwood, Texas
Sample Sign Requirements in Richwood
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Ground Sign (constructed entirely of wood outside fire district) | 24 ft if constructed of wood; 50 ft if speed limit > 45 mph | 192 sq ft if speed limit > 45 mph; otherwise, per regular formula (not specified) | Not listed |
| Ground Sign (with sheet metal or other noncombustible facing in fire district) | 24 ft, 50 ft if speed limit > 45 mph | 192 sq ft if speed limit > 45 mph; otherwise, per regular formula (not specified) | Not listed |
| Roof Sign (tight or solid surface) | 24 ft above roof level | Not listed | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
10
- Ground Sign (constructed entirely of wood outside fire district)
- Ground Sign (with sheet metal or other noncombustible facing in fire district)
- Roof Sign (tight or solid surface)
- Roof Sign (open, ≥40% uniform open area)
- +2 more types
Zoning Districts
1
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Richwood
Other Cities in Texas
Frequently Asked Questions
In Richwood, the height limit for Ground Sign (constructed entirely of wood outside fire district) is 24 ft if constructed of wood; 50 ft if speed limit > 45 mph. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Richwood require a permit. We haven't published Richwood's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
Richwood's sign code covers 10 sign types, including Ground Sign (constructed entirely of wood outside fire district), Ground Sign (with sheet metal or other noncombustible facing in fire district), Roof Sign (tight or solid surface), and Roof Sign (open, ≥40% uniform open area). Most commercial signs need a permit. The ordinance lists 2 exemptions. One of them: A permit fee shall not be required for political signs. The full list is on this page.
This page doesn't list a single setback distance for signs in Richwood. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Richwood's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Richwood Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Richwood, Texas, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Richwood, Texas Sign Rules at a Glance
Richwood, Texas regulates 10 sign types across 1 zoning district. Political Signs (private property, with owner consent) are capped at 8 ft tall and 36 sq ft. Most commercial signs in Richwood require a permit.
Detailed Sign Ordinance Requirements for Richwood, Texas
Sign Rules by Zoning District in Richwood (1 zone)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 10 | 40 ft above roof level | 192 sq ft if speed limit > 45 mph; otherwise, per regular formula (not specified) | Not listed |
Zone-by-Zone Sign Requirements in Richwood
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign (constructed entirely of wood outside fire district) | 24 ft if constructed of wood; 50 ft if speed limit > 45 mph | 192 sq ft if speed limit > 45 mph; otherwise, per regular formula (not specified) | Not listed | Not listed | Not listed | May not be located in the fire district if constructed of wood. If facing is sheet metal or other noncombustible material, can be located in or out of fire district. | Not listed | Unlock | Sec. 28-70 (a)-(f), (g) |
| Ground Sign (with sheet metal or other noncombustible facing in fire district) | 24 ft, 50 ft if speed limit > 45 mph | 192 sq ft if speed limit > 45 mph; otherwise, per regular formula (not specified) | Not listed | Not listed | Not listed | Allowed inside or outside fire district if facing is metal/noncombustible | Not listed | Unlock | Sec. 28-70 (a)-(f), (g) |
| Roof Sign (tight or solid surface) | 24 ft above roof level | Not listed | Not listed | Not listed | Not listed | On roof | Not listed | Unlock | Sec. 28-71 (a)-(d) |
| Roof Sign (open, ≥40% uniform open area) | 40 ft above roof level | Not listed | Not listed | Not listed | Not listed | On roof | Not listed | Unlock | Sec. 28-71 (a)-(e) |
| Projecting Sign | Cannot project above roof or cornice, EXCEPT: A sign at right angle to building, not more than 18" wide perpendicular to wall, may be up to 2 ft above roof/cornice | Not listed | 18 in (if sign at right angle to building and projecting above roof/cornice) | Not listed | Not listed | Attached to exterior walls of buildings | Not listed | Unlock | Sec. 28-73 (a)-(d) |
| Marquee Sign | Shall not exceed more than 6 ft above or 1 ft below marquee; vertical dimension max 8 ft. | Not listed | Not listed | Not listed | Not listed | Attached to or hung from a marquee | Not listed | Unlock | Sec. 28-74 |
| Political Sign (private property, with owner consent) | 8 ft | 36 sq ft | Not listed | Not listed | Not listed | On private real property with property owner consent | Not listed | Unlock | Sec. 28-75 (a)-(h) |
| Political Sign (public property at polling location, voting period) | Not listed | 6 sq ft (2'x3') | Not listed | Not within 10 ft of ROW; must be clear of hazards and not on impervious surface. | Not listed | At polling sites during early voting/Election Day, not within 10 ft of right-of-way, not on impervious surfaces, not in landscape beds, not attached to any structure/building, not a traffic/safety hazard. | Not listed | Unlock | Sec. 28-75 (i) |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Richwood with a free PermitPal account.
Run a free code checkProhibited Signs in Richwood
- Political signs shall not be located on any utility, light, traffic signal or sign pole.
- Political signs shall not be located so as to cause a safety or traffic hazard.
- Political signs shall not be illuminated or projected.
- Political signs shall not contain any moving elements or parts.
- Political signs shall not be placed within public right-of-way.
- Political signs are not allowed on city property except as required by law (V.T.C.A., Election Code § 61.003 or 85.036).
- Political signs on private property may not be illuminated or have moving parts.
- Temporary cloth signs with wood frames may only be kept in place for up to 30 days.
Exempt Signs in Richwood
- A permit fee shall not be required for political signs.
- Political signs are allowed in any zoning district up to 60 days prior to and 7 days after an election.
Source: municode municipal code