Questions? Call us at (262) 218-2915

Sign Regulations in Rollingwood, Texas

Rollingwood, Texas has specific sign regulations covering 15 sign types across 5 zoning districts. Regulated sign types include Wayfinding Sign, Directional Real Estate Sign (Temporary, Without Prior Approval), Contractor Sign (Temporary, Without Prior Approval). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rollingwood, Texas

Sample Sign Requirements in Rollingwood

Sign TypeMax HeightMax AreaSetback
Monument Sign8 ft24 sq ft (frontage <100 ft); 48 sq ft (frontage ≥100 ft)10 ft minimum from property boundary.
Building-Mounted Sign (Channel Letter)Not listed60 sq ft (<25,000 sq ft GFA); 80 sq ft (≥25,000 sq ft GFA)Not listed
Building-Mounted Sign (Channel Logo)Not listed60 sq ft (<25,000 sq ft GFA), 80 sq ft (>25,000 sq ft GFA)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RollingwoodFull Coverage

Sign Types Covered

15

  • Wayfinding Sign
  • Directional Real Estate Sign (Temporary, Without Prior Approval)
  • Contractor Sign (Temporary, Without Prior Approval)
  • Monument Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rollingwood

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Rollingwood, the height limit for Monument Sign in the Commercial District (C), Office Building is 8 ft (Sec. 24-90). Maximum sign heights range from 3 ft to 8 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rollingwood require a permit. From the submission notes on this page: The application for a sign permit must include a site plan depicting the exact location of the proposed sign on the premises, if applicable. Run a code check for an exact address to see the permit requirements for that zone.

Rollingwood's sign code covers 15 sign types, including Wayfinding Sign, Directional Real Estate Sign (Temporary, Without Prior Approval), Contractor Sign (Temporary, Without Prior Approval), and Monument Sign. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Personal signs. The full list is on this page.

In Rollingwood, Monument Sign in the Commercial District (C), Office Building must be set back at least 10 ft from property boundary (Sec. 24-90). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rollingwood's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Rollingwood Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rollingwood, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Rollingwood, Texas Sign Rules at a Glance

Rollingwood, Texas regulates 15 sign types across 5 zoning districts. Wayfinding Signs in the Hospital District (H), Governmental or Institutional District (GI) are capped at 6 ft tall and 2 sq ft (Sec. 24-92(d)). Most commercial signs in Rollingwood require a permit.

Detailed Sign Ordinance Requirements for Rollingwood, Texas

Sign Rules by Zoning District in Rollingwood (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Commercial District (C), Office Building138 ft60 sq ft (<25,000 sq ft GFA); 80 sq ft (≥25,000 sq ft GFA)Not listed
Hospital District (H), Governmental or Institutional District (GI)78 ft60 sq ftNot listed
Park District (P)1Not listedNot listedNot listed
Residential District43 ft5 sq ftNot listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Rollingwood(sample of 3 of 5 zones)

Commercial District (C), Office Building

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Monument Sign8 ft24 sq ft (frontage <100 ft); 48 sq ft (frontage ≥100 ft)Not listed10 ft minimum from property boundary.1 monument sign per premises (<400 linear ft frontage); up to 2 for >400 linear ft, minimum 100' spacing.On-premises, set back at least 10 ft from property boundary.Not listedUnlockSec. 24-90
Building-Mounted Sign (Channel Letter)Not listed60 sq ft (<25,000 sq ft GFA); 80 sq ft (≥25,000 sq ft GFA)75% of linear width of front facadeNot listed1 per public entrance façade, 2 on front if bldg 10,000–25,000 sq ft, 3 if >25,000 sq ftOn each building façade with public entranceNot listedUnlockSec. 24-91(a, b, e)
Building-Mounted Sign (Channel Logo)Not listed60 sq ft (<25,000 sq ft GFA), 80 sq ft (>25,000 sq ft GFA)75% of frontageNot listed1 per public entrance façade, see above for bldg sizeOn building façade with public entranceNot listedUnlockSec. 24-91(a, c, e)
Building-Mounted Sign (Dimensional Letter)Not listed60 sq ft (<25,000 sq ft GFA); 80 sq ft (≥25,000 sq ft GFA)75% of linear width of front facadeNot listedSame as aboveOn building façade with public entranceNot listedUnlockSec. 24-91(a, d, e)
Projecting SignNot listed6 sq ft4 ft (from facade)Min. 8' above grade for clearance1 per establishmentAttached to building, projecting perpendicularlyNot listedUnlockSec. 24-92(c)
Commercial Real Estate Sign (Temporary, Prior Approval)Not listed10 sq ftNot listed10 ft min from right-of-way1On-premises being sold/leased, min. 10 ft from right-of-wayNot listedUnlockSec. 24-93(b)(1)
Contractor Sign (Temporary, Without Prior Approval)Not listed10 sq ft per contractor/subcontractorNot listedMin. 10' from right-of-way unless on fencing1 per contractor/subcontractorOn-premises being improved.Not listedUnlockSec. 24-94(b)(3)
A-Frame Sign (Temporary, Without Prior Approval)3.5 ft10 sq ft (total, 5 sq ft per face)Not listedNot listed1 per establishmentPrivate sidewalk, must not impede ADA or pedestrians, not within public right-of-way.Not listedUnlockSec. 24-94(b)(5)

Hospital District (H), Governmental or Institutional District (GI)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Monument Sign8 ft24 sq ft (<100 ft frontage), 48 sq ft (≥100 ft frontage)Not listed10 ft setback1 (<400 ft frontage); 2 (>400 ft, 100 ft apart).On premises, setback 10 ft minimum from property boundary.Not listedUnlockSec. 24-90; Sec. 24-95(a)
Building-Mounted Sign (Dimensional Letter)Not listed60 sq ft75% of facade widthNot listedSee above: up to 3 depending on building sizeOn building façade.Not listedUnlockSec. 24-91(f); Sec. 24-95(a)
Wayfinding Sign6 ft2 sq ftNot listedNot listedNot listedOn premises.Not listedUnlockSec. 24-92(d)
Commercial Real Estate Sign (Temporary, Prior Approval)Not listed10 sq ftNot listed10 ft min from right-of-way1On-premises being sold/leased, 10 ft min from right-of-wayNot listedUnlockSec. 24-93(b)(1)
Banner (Temporary, Prior Approval)Not listed32 sq ftNot listedNot listed1 at a timeOn-premisesNot listedUnlockSec. 24-93(b)(2)
Directional Real Estate Sign (Temporary, Without Prior Approval)3 ftNot listedNot listedNot listed1Right-of-way or adjoining property.Not listedUnlockSec. 24-94(b)(2)
Contractor Sign (Temporary, Without Prior Approval)Not listed10 sq ft per contractor/subcontractorNot listed10 ft min from right-of-way1 per contractor/subcontractorOn premises being improved.Not listedUnlockSec. 24-94(b)(3)

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wayfinding SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlockSec. 24-92(a)
Residential Real Estate Sign (Temporary, Without Prior Approval)Not listed5 sq ftNot listed10 ft from ROW unless hardship1On premises being sold/leased, min. 10 ft from ROWNot listedUnlockSec. 24-94(b)(1)
Directional Real Estate Sign (Temporary, Without Prior Approval)3 ftNot listedNot listedNot listed1In ROW or adjacent property (with consent).Not listedUnlockSec. 24-94(b)(2)
Contractor Sign (Temporary, Without Prior Approval)Not listed5 sq ftNot listedNot listed1On premises being improved.Not listedUnlockSec. 24-94(b)(3)

PermitPal covers all 5 zoning districts in Rollingwood. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rollingwood

  • No person shall construct, alter or move any sign without first obtaining a sign permit from the building official, unless exempted by this article.
  • No sign may be erected or maintained in such manner as to obstruct the view of operators of motor vehicles, or at any location where, by reason of position, shape, size, color or illumination, it may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal or device.
  • No person may place, erect or maintain any sign on any tree, utility pole, fence, retaining wall, easement or right-of-way, unless specifically authorized by this article.
  • No person may place, erect or maintain any sign upon any city property without the prior approval of the city council.
  • Unless expressly authorized or allowed under this article, no signs are permitted within the city.
  • All signs not expressly permitted under this article or exempt from regulation in accordance with Section 24-26 or that do not conform to the requirements of this article are prohibited in the city.
  • The following types of signs are prohibited: Animated signs; Exposed neon signs; Front-lit channel letter signs; Illuminated awnings; Wrap-around awnings; Menu/message/marquee signs; Off-premises signs; Painted wall signs; Portable signs; Roof-mounted signage; Wall/pole-mounted cabinet signs; Externally illuminated signs; Changeable electronic variable message signs.
  • No sign on a lot zoned commercial district (C) shall face an adjacent residentially zoned lot.

Exempt Signs in Rollingwood

  • Memorial signs or tablets, or names of buildings and date of erection when cut into any masonry surface or when constructed of cast bronze or other metal.
  • Signals, markers or signs erected by state or local government for traffic control or informational purposes.
  • Temporary decorations or displays that are clearly incidental to and customarily or commonly associated with any national, local or religious holiday or celebration, provided that such decorations or displays are maintained in an attractive condition and do not constitute a fire, traffic or pedestrian hazard.
  • Temporary or permanent signs erected by public utility companies or construction companies to warn of danger or hazardous conditions, including signs indicating the presence of underground cables, gas lines and other devices.
  • Signs displayed by a civic organization up to three days before and on the meeting day of such organization if such signs do not exceed four square feet in surface area on each of the two sides.
  • Residential nameplates, residential address numerals, and notices that property is protected by a security company or neighborhood watch.
  • Newspaper names and prices on vending racks.
  • Personal signs.
  • Political signs.

Sign Plan & Submission Notes for Rollingwood

  • A sign permit is required before constructing, altering, or moving any sign, unless exempted by this article.
  • The application for a sign permit must include a site plan depicting the exact location of the proposed sign on the premises, if applicable.
  • An elevation and specification drawing to scale of the proposed sign must be submitted with the sign permit application.
  • The application for a monument sign must bear the signature and seal of a registered professional engineer.
  • An application for a variance must include the application for a sign permit and requires a public hearing and approval by the city council.
  • Signs on local, state, or federal government property or in parks require city council approval after a public hearing.
  • Applications for variances from sign regulations require a public hearing before the city council and may be approved, denied, or modified.

Source: municode municipal code