Questions? Call us at (262) 218-2915

Sign Regulations in Spring Valley Village, Texas

Spring Valley Village, Texas has specific sign regulations covering 20 sign types across 5 zoning districts. Regulated sign types include Temporary Sign (For Sale or For Rent), Temporary Sign (Garage or Yard Sale), Temporary Sign (Residential Development Sales). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 6, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Spring Valley Village, Texas

Sample Sign Requirements in Spring Valley Village

Sign TypeMax HeightMax AreaSetback
Temporary Sign (For Sale or For Rent)4 ft6 sq ft total sign areaNot listed
Temporary Sign (Garage or Yard Sale)4 ft6 sq ft per faceMinimum 10 ft from the pavement edge of any street
Temporary Sign (Residential Development Sales)12 ft above surrounding finished grade (including supporting structure)48 sq ft per faceMinimum 10 ft from the pavement edge of any street; not within any public street right-of-way

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Spring Valley VillageFull Coverage

Sign Types Covered

20

  • Temporary Sign (For Sale or For Rent)
  • Temporary Sign (Garage or Yard Sale)
  • Temporary Sign (Residential Development Sales)
  • Subdivision Identification Sign (Monument or Masonry-Embedded)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Spring Valley Village

Spring Valley Village, Texas Sign Rules at a Glance

Spring Valley Village, Texas regulates 20 sign types across 5 zoning districts. Temporary Signs (Garage or Yard Sale) in the A - Dwelling District are capped at 4 ft tall and 6 sq ft per face, set back at least 10 ft from the pavement edge of any street. Most commercial signs in Spring Valley Village require a permit.

Detailed Sign Ordinance Requirements for Spring Valley Village, Texas

Sign Rules by Zoning District in Spring Valley Village (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
A - Dwelling District512 ft above surrounding finished grade (including supporting structure)50 sq ft per sign face
B - Office Building District612 ft above surrounding finished grade (including supporting structure)100 sq ft per face
C - Commercial District512 ft above surrounding finished grade (including base)100 sq ft per face
PAD - Planned Area Development District115 ft above natural grade32 sq ft per face
General Regulations For All Zones512 ft above finished grade100 sq ft

Zone-by-Zone Sign Requirements in Spring Valley Village(sample of 3 of 5 zones)

A - Dwelling District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (For Sale or For Rent)4 ft6 sq ft total sign areaNot listed1 per street frontageOn the subject lot; one sign allowed for each street frontage of the lotUnlock10:04.01; 10:02.N-01; 10:07.01
Temporary Sign (Garage or Yard Sale)4 ft6 sq ft per faceMinimum 10 ft from the pavement edge of any streetUp to 4 per sale eventOn private property only with owner’s consent; prohibited within any public street right-of-wayUnlock10:04.02; 10:07.01
Temporary Sign (Residential Development Sales)12 ft above surrounding finished grade (including supporting structure)48 sq ft per faceMinimum 10 ft from the pavement edge of any street; not within any public street right-of-way1 per major street entranceAt each major street entrance to an approved and recorded residential development of two or more one-family dwellingsUnlock10:04.03; 10:03.01
Subdivision Identification Sign (Monument or Masonry-Embedded)Not listed50 sq ft per sign faceNot listed1 per main street entranceAt each main street entrance to a residential subdivisionUnlock10:04.04; 10:03.01
Monument Sign (Place of Worship)6 ft above surrounding finished grade20 sq ft per faceNot listed1 monument sign per place of worship propertyOn the property of the church, synagogue, or other place of worshipUnlock10:07.02; 10:08.10 (lighting prohibitions)

B - Office Building District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (Building Construction)12 ft above surrounding finished grade (including supporting structure)48 sq ft per faceMinimum 10 ft from a railroad right-of-way; not within any public street right-of-way; minimum 10 ft from the pavement edge of any street1 per building projectOn the site of the office building project while under construction and being offered for sale, lease, or rentUnlock10:05.01(.01), .03; 10:03.01
Temporary Sign (For Sale or For Rent)12 ft above surrounding finished grade (including supporting structure)48 sq ft per faceMinimum 10 ft from a railroad right-of-way; not within any public street right-of-way; minimum 10 ft from the pavement edge of any street1 per lot or parcelOn the lot or parcel being offered for sale, lease, or rentUnlock10:05.01(.02), .03; 10:03.01
Banner (Temporary – Office Space Availability)2 inches of banner height per 1 foot of wall height; must not extend above the top of the building parapet15% of the wall area to which attachedNot listed1 banner per building at a time (implicit by regulation of a single banner)Mounted on the wall of the office building; must be oriented and displayed only in a southerly direction facing Interstate Highway 10Unlock10:05.02
Monument Sign (Office Building – Frontage on Interstate Highway 10)12 ft above surrounding finished grade (including base)100 sq ft per faceNot listed1 per office building (integrated office developments: 1 per separate office building)On the office building property that fronts Interstate Highway 10Unlock10:05.03 and 10:05.03(.01)
Monument Sign (Office Building – Frontage on Other Thoroughfares)6 ft above surrounding finished grade (including base)50 sq ft per faceNot listed1 per office building (integrated office developments: 1 per separate office building)On the office building property that faces a thoroughfare other than Interstate Highway 10Unlock10:05.03 and 10:05.03(.01)
Wall Sign (Office Buildings)2 inches of sign height per 1 foot of wall height; must not extend above the top of the building parapet15% of the area of the wall to which attached (cumulative for all wall signs on that wall)Not listedNot numerically limited; subject to cumulative area cap per wallAttached to the wall(s) of the building or portion of building to which the sign pertainsUnlock10:05.04

C - Commercial District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (Project Construction)10 ft above surrounding finished grade (including supporting structure)48 sq ft per faceNot within any public street right-of-way; minimum 10 ft from the pavement edge of any street1 per project siteOn the site of the project or building while under construction and being offered for sale, lease, or rentUnlock10:06.02(.01), (.03); 10:03.01
Temporary Sign (For Sale or For Rent)10 ft above surrounding finished grade (including supporting structure)48 sq ft per faceNot within any public street right-of-way; minimum 10 ft from the pavement edge of any street1 per lot or parcelOn the lot or parcel being offered for sale, lease, or rentUnlock10:06.02(.02), (.03); 10:03.01
Monument Sign (I-10 Frontage)12 ft above surrounding finished grade (including base)100 sq ft per faceMinimum spacing: 50 ft from any other monument sign on the same tract1 per tract; in Integrated Business Developments: 1 per separate building, total not to exceed number of driveway entrancesOn a tract where the enterprise fronts Interstate Highway 10Unlock10:06.03 and 10:06.03(.01)
Monument Sign (Other Thoroughfares)6 ft above surrounding finished grade (including base)50 sq ft per faceMinimum spacing: 50 ft from any other monument sign on the same tract1 per tract; in Integrated Business Developments: 1 per separate building, total not to exceed number of driveway entrancesOn a tract fronting a thoroughfare other than Interstate Highway 10Unlock10:06.03 and 10:06.03(.01)
Wall Sign (Commercial Uses)2 inches of sign height per 1 foot of wall height; must not extend above the top of the building parapet15% of the area of the wall to which attached (cumulative for all wall signs on that wall)Not listedNot numerically limited; subject to cumulative area cap per wallAttached to the wall(s) of the building or portion of building to which the sign pertainsUnlock10:06.04

PermitPal covers all 5 zoning districts in Spring Valley Village. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Spring Valley Village

  • Erecting, constructing, reconstructing, or altering a sign without first obtaining a sign permit, except where specifically exempted (10:03.01).
  • Changeable Electronic Variable Message Signs (CEVMS) are prohibited citywide except for properties adjacent to State rights-of-way (subject to CEVMS regulations) (10:07.03(a)).
  • Off-premise signs (10:08.01).
  • Portable or wheeled signs, including trailer or bench signs, or any sign not permanently anchored (10:08.02).
  • Signs advertising a business, activity, or service no longer conducted on the premises after 12 months (abandoned signs) (10:08.03).
  • Signs that move or contain visible moving parts (10:08.04).
  • Signs with or having attached banners, posters, pennants, ribbons, streamers, balloons, strings of lights, spinners, or similar devices, except where specifically authorized in this ordinance (10:08.05).
  • Signs with obscene, indecent, or immoral content that offend public morals or decency (10:08.06).
  • Signs located on or projecting/overhanging any public right-of-way, sidewalk, street, alley, or other public property (10:08.07).
  • Any sign that creates a hazard or danger to public health, safety, or welfare (10:08.08).
  • Signs that use words/symbols in a manner that interferes with, misleads, or confuses vehicular traffic (10:08.09).
  • Signs with reflectors or glaring, rotating, strobe, flashing, blinking, traveling, or spot lights; signs featuring a changing or moving message or the illusion of movement; or exposed neon tubing, except as otherwise authorized (10:08.10).
  • Signs attached to or located upon benches, trash containers, or fences visible from any street (10:08.11).
  • Signs placed on the side or rear of a building or property when facing a residential area from which such sign is visible (10:08.12).
  • Miscellaneous posters/signs tacked, painted, pasted, or affixed on walls, trees, poles, posts, fences, or other structures and visible from a public right-of-way or pedestrian area (10:08.13).
  • Signs resembling official traffic control signs/signals/devices or bearing words like Stop, Go Slow, Caution, Danger, Warning, or similar (10:08.14).
  • Signs that may be confused with traffic control signs/signals/devices or emergency/road equipment lights, that obstruct visibility of such devices, or otherwise create traffic hazards (10:08.15).
  • Advertising devices attached to motor vehicles or trailers parked on public right-of-way, public property, or on private property so as to be visible from a public right-of-way when the basic purpose is advertising/directing to a business or activity; typical commercial vehicle lettering is not prohibited (10:08.16).
  • Any sign that emits audible sound, odor, or visible matter (10:08.17).
  • Banners, pennants, search lights, twirling signs, sandwich or A-frame signs, or similar advertising signs located on the development site or on the sidewalk, curb, or right-of-way adjacent to the property, except as otherwise provided (10:08.18).
  • Roof signs (including any sign extending above the roof/parapet or top of fascia as defined) (10:08.19).
  • Signs painted directly on the building fascia (10:08.20).
  • Project identification signs mounted on pylons or supports made of wood (10:08.21).
  • Placing a sign on property not owned or lawfully occupied without the written consent of the owner or lawful occupant (10:09.01).
  • Failing to remove a sign after written notice from the Sign Administrator (10:09.02).

Exempt Signs in Spring Valley Village

  • Signs erected by the City of Spring Valley, the State of Texas (including its political subdivisions such as school districts), or the United States Government, or signs otherwise required by Federal, State, or local law are exempt from sign permit (10:03.03.01).
  • Railroad signs are exempt from sign permit (10:03.03.02).
  • On-premise directional signs for parking/building location or on-site traffic flow are exempt from sign permit, limited to 6 square feet and 3 feet in height (10:03.03.03).
  • Non-Commercial Message Signs are exempt from sign permit in all districts (10:03.03.04; 10:07.01).
  • Display of standard-size flags of the United States, the State of Texas, Harris County, or the City of Spring Valley is not prohibited (10:07.01.02).

Source: municode municipal code

Frequently Asked Questions

In Spring Valley Village, the height limit for Monument Sign (Office Building – Frontage on Interstate Highway 10) in the B - Office Building District is 12 ft above surrounding finished grade (including base). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Spring Valley Village's sign code covers 20 sign types, including Temporary Sign (For Sale or For Rent), Temporary Sign (Garage or Yard Sale), Temporary Sign (Residential Development Sales), and Subdivision Identification Sign (Monument or Masonry-Embedded). Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Signs erected by the City of Spring Valley, the State of Texas (including its political subdivisions such as school districts), or the United States Government, or signs otherwise required by Federal, State, or local law are exempt from sign permit (10:03.03.01). The full list is on this page.

In Spring Valley Village, Monument Sign (I-10 Frontage) in the C - Commercial District must be set back 50 ft from any other monument sign on the same tract. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Spring Valley Village's sign ordinance that cover digital, changing, or flashing signs: Changeable Electronic Variable Message Signs (CEVMS) are prohibited citywide except for properties adjacent to State rights-of-way (subject to CEVMS regulations) (10:07.03(a)). Signs with reflectors or glaring, rotating, strobe, flashing, blinking, traveling, or spot lights; signs featuring a changing or moving message or the illusion of movement; or exposed neon tubing, except as otherwise authorized (10:08.10). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Spring Valley Village Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Spring Valley Village, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds