Sign Regulations in Sandy, Utah
Sandy, Utah has specific sign regulations covering 8 sign types across 5 zoning districts. Regulated sign types include Temporary Sign - Sale, Lease, Rent, or Auction, Wall Sign, Monument Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 5, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Sandy, Utah
Sample Sign Requirements in Sandy
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Home Occupation Sign | Not listed | 1 square foot | Not listed |
| Temporary Sign - Residential Development | 12 feet | 32 to 128 square feet | Not listed |
| Temporary Sign - Sale, Lease, Rent, or Auction | 6 feet | 9 square feet | Not less than three feet |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
8
- Temporary Sign - Sale, Lease, Rent, or Auction
- Wall Sign
- Monument Sign
- Pylon Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Sandy
Other Cities in Utah
Frequently Asked Questions
In Sandy, the height limit for Pylon Sign in the Commercial District is 25 feet (Sec. 21-26-7(c)). Maximum sign heights range from 12 feet to 75 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Sandy require a permit. From the submission notes on this page: All multi-tenant centers/buildings must submit a proposal for design and placement of all on-premises signs to the Planning Commission during site plan review. Run a code check for an exact address to see the permit requirements for that zone.
Sandy's sign code covers 8 sign types, including Temporary Sign - Sale, Lease, Rent, or Auction, Wall Sign, Monument Sign, and Pylon Sign. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Installation of a metal plaque or plate or individual letters or figures in a sidewalk commemorating a historical, cultural, or artistic event, location, or personality with a permit. The full list is on this page.
In Sandy, Monument Sign in the Commercial District must be set back at least 3 feet from driveways and sidewalks (Sec. 21-26-7(g)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Sandy's sign ordinance that cover digital, changing, or flashing signs: Flashing or animated signs, including architectural lighting features or elements. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Sandy Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Sandy, Utah, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Sandy, Utah Sign Rules at a Glance
Sandy, Utah regulates 8 sign types across 5 zoning districts. Pylon Signs in the Commercial District are capped at 25 feet tall, set back at least 3 feet from driveways and sidewalks (Sec. 21-26-7(c)). Most commercial signs in Sandy require a permit.
Detailed Sign Ordinance Requirements for Sandy, Utah
Sign Rules by Zoning District in Sandy (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential District | 3 | 12 feet | 32 to 128 square feet | Not listed |
| Commercial District | 3 | 25 feet | 50% of total sign copy area for reader boards | Not listed |
| Industrial District | 3 | 25 feet | 50% of total sign copy area for reader boards | Not listed |
| Nonresidential zoning districts | 2 | 12 feet | 64 square feet | Not listed |
| General Regulations For All Zones | 1 | 75 feet | 1,000 square feet | Not listed |
Zone-by-Zone Sign Requirements in Sandy(sample of 3 of 5 zones)
Residential District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Home Occupation Sign | Not listed | 1 square foot | Not listed | Not listed | 1 | Mounted to the residence | Not listed | Unlock | Sec. 21-26-6(b) |
| Temporary Sign - Residential Development | 12 feet | 32 to 128 square feet | Not listed | Not listed | 1 or more per street frontage | On-site | Not listed | Unlock | Sec. 21-26-8(c)(1) |
| Temporary Sign - Sale, Lease, Rent, or Auction | 6 feet | 9 square feet | Not listed | Not less than three feet | 1 per frontage | On-site | Not listed | Unlock | Sec. 21-26-8(c)(2) |
Commercial District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 15% of the primary business wall area | Not listed | Not listed | Up to 7 per elevation | On a wall under complete control by the tenant | Not listed | Unlock | Sec. 21-26-7(j) |
| Monument Sign | 6 feet | Determined by frontage length | Not listed | At least 3 feet from driveways and sidewalks | 1 per street frontage | On each associated street frontage | Not listed | Unlock | Sec. 21-26-7(g) |
| Pylon Sign | 25 feet | 50% of total sign copy area for reader boards | Not listed | At least 3 feet from driveways and sidewalks | 1 per street frontage | Within 30-foot setback area from property line | Not listed | Unlock | Sec. 21-26-7(c) |
Industrial District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | 15% of the primary business wall area | Not listed | Not listed | Up to 7 per elevation | On a wall under complete control by the tenant | Not listed | Unlock | Sec. 21-26-7(j) |
| Monument Sign | 6 feet | Determined by frontage length | Not listed | At least 3 feet from driveways and sidewalks | 1 per street frontage | On each associated street frontage | Not listed | Unlock | Sec. 21-26-7(g) |
| Pylon Sign | 25 feet | 50% of total sign copy area for reader boards | Not listed | At least 3 feet from driveways and sidewalks | 1 per street frontage | Within 30-foot setback area from property line | Not listed | Unlock | Sec. 21-26-7(c) |
PermitPal covers all 5 zoning districts in Sandy. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Sandy
- Any sign not specifically allowed by this chapter is prohibited.
- Signs on bus benches and on transit stop enclosures.
- Flashing or animated signs, including architectural lighting features or elements.
- Graffiti.
- Off-premises signs, including billboards.
- Roof signs, including flags of any type.
- Sexually oriented signs.
- Statuary bearing the likeness or suggestion of any product or logo.
- Snipe signs.
- Flagpole accents not serving to illuminate solely the pole itself.
- No person shall paint, mark or write on, post or otherwise affix any handbill or sign to or upon any public property.
Exempt Signs in Sandy
- Face changes in nonconforming multi-tenant signs.
- Copy changes in nonconforming permanent signs originally approved by the City with a changeable copy feature.
- Installation of a metal plaque or plate or individual letters or figures in a sidewalk commemorating a historical, cultural, or artistic event, location, or personality with a permit.
- Painting of house numbers upon curbs.
Sign Plan & Submission Notes for Sandy
- All multi-tenant centers/buildings must submit a proposal for design and placement of all on-premises signs to the Planning Commission during site plan review.
- All such developments must have an approved sign theme before any sign permits will be issued to a business locating within it.
- Upon planning commission approval, the design and placement of on-premises signs for developments of seven acres or larger and having at least 300 lineal feet of frontage may vary from the regulations set forth herein.
Source: municode municipal code