Questions? Call us at (262) 218-2915

Sign Regulations in Duvall, Washington

Duvall, Washington has specific sign regulations covering 22 sign types across 4 zoning districts. Regulated sign types include Blade Sign, Directional Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 5, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Duvall, Washington

Sample Sign Requirements in Duvall

Sign TypeMax HeightMax AreaSetback
Blade SignNot listed6 sq ftNot listed
Directional Sign4 ft6 sq ftNot listed
Wall SignNot listedUp to 300 sq ft per building (no single sign over 150 sq ft); up to 100 sq ft per sign without Design Review Board approvalNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for DuvallFull Coverage

Sign Types Covered

22

  • Blade Sign
  • Directional Sign
  • Wall Sign
  • Projecting Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Duvall

City WebsiteMunicipal Code5 permit application links available

Frequently Asked Questions

In Duvall, the height limit for Monument Sign in the Commercial District (CO) and other zoning districts is 10 ft. Maximum sign heights range from 6 ft to 10 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Duvall require a permit. From the submission notes on this page: If a Master Sign Plan was previously approved and a proposed sign conforms to that plan, the applicant need not submit a site plan or other information already included in the MSP. Run a code check for an exact address to see the permit requirements for that zone.

Duvall's sign code covers 22 sign types, including Blade Sign, Directional Sign, Wall Sign, and Projecting Sign. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Religious symbols. The full list is on this page.

In Duvall, Monument Sign in the Commercial District (CO) and other zoning districts must be set back 5 ft from public right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Duvall's sign ordinance that cover digital, changing, or flashing signs: Electronic changeable message signs or signs containing moving graphics, text, or video, or that are flashing, moving, rotating, or animated. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Duvall Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Duvall, Washington, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Duvall, Washington Sign Rules at a Glance

Duvall, Washington regulates 22 sign types across 4 zoning districts. Monument Signs in the Commercial District (CO) and other zoning districts are capped at 10 ft tall and 48 sq ft, set back 5 ft from public right-of-way. Most commercial signs in Duvall require a permit.

Detailed Sign Ordinance Requirements for Duvall, Washington

Sign Rules by Zoning District in Duvall (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Old Town District (OT), Riverview District (RIV)66 ftUp to 300 sq ft per building (no single sign over 150 sq ft); up to 100 sq ft per sign without Design Review Board approvalNot listed
Commercial District (CO), Mixed Use District (MU), Light Industrial District (LI), Utility District 1 (UT1), Manufactured/Mobile Home District (MT), Public Facilities District (PF)910 ftUp to 300 sq ft per building (no single sign over 150 sq ft); up to 100 sq ft per sign without Design Review Board approvalNot listed
Residential District26 ftUp to 300 sq ft per building (no single sign over 150 sq ft); up to 100 sq ft per sign without Design Review Board approvalNot listed
General Regulations For All Zones1110 ft150 sq ftNot listed

Zone-by-Zone Sign Requirements in Duvall(sample of 3 of 4 zones)

Old Town District (OT), Riverview District (RIV)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Blade SignNot listed6 sq ftNot listedNot listedOne primary sign and one blade sign per building elevation/modulation.Attached to building canopy or overhang; may be attached to wall if overhead attachment not available; must provide a minimum clearance of 8 ftNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(A)
Directional Sign4 ft6 sq ftNot listedNot listedOne per entrance to siteWithin 10 ft of intersection of two or more pedestrian sidewalks or pathsNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(G)
Wall SignNot listedUp to 300 sq ft per building (no single sign over 150 sq ft); up to 100 sq ft per sign without Design Review Board approvalMax width of 2/3 of building/tenant façadeNot listedNot listedOn business's building façade, same floor as business (unless multi-floor). Shall not block windows/ornamentation or conflict with other signage.Not listedUnlockDMC 14.50.080 Table 14.50.1(g); DMC 14.50.090; DMC 14.50.130(C)
Projecting Sign6 ft25 sq ft4 in (depth); projects no more than 5 ft from buildingNot listedNot listedOn building facade, minimum clearance 10 ft, outward projection max 5 ft, inner edge no more than 6 inches from wallNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(B)
Window SignNot listedNot listedNot listedNot listedNot listedWithin 3 feet of interior window surface, visible from outsideNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(E)
Community BannerNot listedNot listedNot listedNot listedNot listedAssigned banner locations/areas per City's policyNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.150(G)

Commercial District (CO), Mixed Use District (MU), Light Industrial District (LI), Utility District 1 (UT1), Manufactured/Mobile Home District (MT), Public Facilities District (PF)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Blade SignNot listed6 sq ftNot listedNot listedOne primary sign and one blade sign per building elevation/modulation.Attached to building canopy/overhang or wall; minimum clearance 8 ftNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(A)
Directional Sign4 ft6 sq ftNot listedNot listedOne per site entranceWithin 10 ft of intersection of walkwaysNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(G)
Wall SignNot listedUp to 300 sq ft per building (no single sign over 150 sq ft); up to 100 sq ft per sign without Design Review Board approval2/3 of lineal width of building/tenant facadeNot listedNot listedOn same floor as business on building facadeNot listedUnlockDMC 14.50.080 Table 14.50.1(g); DMC 14.50.090; DMC 14.50.130(C)
Projecting Sign6 ft25 sq ft4 in (depth); projects max 5 ft from buildingNot listedNot listedOn building facade; minimum clearance 10 ftNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(B)
Window SignNot listedNot listedNot listedNot listedNot listedAffixed inside window, visible outsideNot listedUnlockDMC 14.50.080 Table 14.50.1; DMC 14.50.130(E)
Monument Sign10 ft48 sq ftNot listed5 ft from public right-of-wayOne per 300 ft of frontage, max two per parcel, separated by 150 ft on same frontageOn private property, min 5 ft from ROW, in Type III landscaping within 5 ft of signNot listedUnlockDMC 14.50.080 Table 14.50.1(a); DMC 14.50.130(F)(1)
Twin Post Sign8 ft25 sq ftNot listed5 ft from public right-of-wayOne per parcelPlaced min 5 ft from ROW; in Type III landscaping within 5 ftNot listedUnlockDMC 14.50.080 Table 14.50.1(a); DMC 14.50.130(F)(2)
Changeable Message Center (Manual)Not listedNot listedNot listedSee monument/twin post wherever mountedSee monument/twin post sign limitsFreestanding (as monument or part of sign)Not listedUnlockDMC 14.50.080 Table 14.50.1(a)(e); 14.50.130(F)(1)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
A-Board (Temporary/Commercial)3 ft6 sq ft2 ftNot listedOne per tenant entryWithin property lines or on public sidewalk; not impeding 4 ft sidewalk minimumNot listedUnlockDMC 14.50.150(A)
A-Board (Community Event)3 ft6 sq ftNot listedNot listedMax 3 per eventOn private property with consent or in public ROW where allowedNot listedUnlockDMC 14.50.150(F)
Banner (Temporary Commercial Events)Not listed150 sq ftNot listedNot listedMax 2 per business at one timeAttached to building facade of sponsoring businessNot listedUnlockDMC 14.50.150(B)
Construction Sign (Temporary)10 ft32 sq ftNot listed5 ft min from property line; 30 ft from adjacent propertyOne per street frontageOn subject property, min 5 ft from property line, not closer than 30 ft from adjacent property lineNot listedUnlockDMC 14.50.150(C)
Political Sign8 ft (private property); 3 ft (in ROW)32 sq ft (private property); 4 sq ft (in ROW)Not listedNot listedNot listedOn private property with owner consent; or in public right-of-wayNot listedUnlockDMC 14.50.150(D)
Real Estate Sign (On-site Residential Unit)6 ft6 sq ftNot listedNot listedOne per street frontage/road intersectionOne per street frontage/road intersection on siteNot listedUnlockDMC 14.50.150(E)
Real Estate Sign (A-Board)3 ft6 sq ft2 ftNot listedOne per turning movement or road intersectionOn site or off-site in improved right-of-wayNot listedUnlockDMC 14.50.150(E)
Real Estate Sign (On-site Commercial/Industrial/Multifamily/Neighborhood)8 ft32 sq ftNot listedNot listedOne per street frontage/intersectionOn site, one per street frontage/intersectionNot listedUnlockDMC 14.50.150(E)

PermitPal covers all 4 zoning districts in Duvall. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Duvall

  • Any sign that does not comply with the provisions of this chapter.
  • Signs attached to a fence unless otherwise approved by the planning director for community events.
  • Signs which, by reason of their size, location, movement, content, coloring, or manner of illumination may be confused with traffic control signs or signals.
  • Temporary signs except as specifically allowed in DMC Section 14.50.150.
  • Signs located in the public right-of-way, or within travel lanes or sidewalks, or attached to traffic control signs, utility, signal poles or snipe signs, except as otherwise allowed by City Code.
  • Billboards.
  • Electronic changeable message signs or signs containing moving graphics, text, or video, or that are flashing, moving, rotating, or animated.
  • Advertising vehicle.
  • Portable and mobile readerboard signs.
  • Visible ballast boxes, exposed electrical conduits, or other sign equipment.
  • Wall mounted box/cabinet signs.
  • Pole mounted freestanding signs, except those described in DMC Section 14.50.130.
  • Roof mounted signs unless no other feasible alternative location exists as determined by the planning director.
  • Off-site signage except as allowed under this chapter.
  • Signs located on canopies made of fabric or other non-rigid material.
  • Signs in the public right-of-way which impede pedestrian or vehicular circulation or use.
  • Signs in the public right-of-way which negatively impact or have the potential to negatively impact utilities or vegetation such as planter strips or roadway medians.
  • Signs that obstruct sight distances or sight distance triangle as defined in Chapter 14.06 DMC, Definitions.

Exempt Signs in Duvall

  • Signs required by law, including official or legal notices issued and posted by any public agency or court, or traffic directional or warning signs.
  • Plaques, tablets, or inscriptions indicating the name of a building, date of erection, or other commemorative information, which are integral to the building structure or attached flat to the face of the building, are non-illuminated, and do not exceed four square feet in surface area.
  • Incidental signs not exceeding four square feet in surface area, provided that this size limitation does not apply to signs providing directions, warnings, or information when established and maintained by a public agency.
  • Religious symbols.
  • Signs not visible from the public right-of-way, neighboring properties or tenant spaces.
  • Sponsors of and vendors at community events provided the signage is located within the event area and removed at the end of each day.
  • Signs required by State or Federal agencies.

Sign Plan & Submission Notes for Duvall

  • A Master Sign Plan (MSP) is required for multi-tenant commercial developments and must contain a site plan, details of proposed/existing signage, and a design theme narrative. Approval is by the Planning Director. Any changes to a previously approved MSP require Planning Director approval.
  • If a Master Sign Plan was previously approved and a proposed sign conforms to that plan, the applicant need not submit a site plan or other information already included in the MSP.
  • Applicants for new signs requiring a permit must submit an application that includes an accurate plan with dimensions, location, size, color, shape, materials, type of illumination, lettering style, and installation method; all existing signage must be noted.
  • Sign permits are reviewed administratively or by the Design Review Board as indicated by table footnotes; certain large or specific sign types require Design Review Board review at a Planning Commission meeting.
  • All signs in excess of 100 square feet require review and approval from the Design Review Board.
  • Departures from chapter standards require written requests and may be considered by the planning director and/or Design Review Board but may not include departures from number of signs, illumination standards, types of signs, dimensional requirements, or inconsistencies with code purposes.
  • Community event signage requires submission of an Event Signage Plan depicting the location of each sign.
  • Development agreements and unified site development plans can establish sign design standards for sites; permit applications consistent with such approved plans do not require additional design review.

Source: municode municipal code