Questions? Call us at (262) 218-2915

Sign Regulations in Royal City, Washington

Royal City, Washington has specific sign regulations covering 43 sign types across 6 zoning districts. Regulated sign types include Garage Sale Sign, Building Sign, Community Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 5, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Royal City, Washington

Sample Sign Requirements in Royal City

Sign TypeMax HeightMax AreaSetback
Architectural Appendage SignFlush-mounted or suspended under appendage; minimum 8' clearance above grade if suspendedSee Building signNot listed
Building SignContained within outline of facade25% of each facade; no individual sign larger than 15% of a facadeNot listed
Changeable Copy Sign25' for free-standing, freeway or freeway interchange sign; or wall height for wall signSee applicable base sign typeNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Royal CityFull Coverage

Sign Types Covered

43

  • Garage Sale Sign
  • Building Sign
  • Community Sign
  • Public or Recreational Identification Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Royal City

Frequently Asked Questions

In Royal City, the height limit for Free-standing Sign in the Commercial zones, Industrial zones is 25'. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Royal City require a permit. From the submission notes on this page: A site plan is required as part of the sign permit application for new, replacement, or certain types of signs. Run a code check for an exact address to see the permit requirements for that zone.

Royal City's sign code covers 43 sign types, including Garage Sale Sign, Building Sign, Community Sign, and Public or Recreational Identification Sign. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: The replacement of the face or faces of a cabinet sign is exempt from sign permit requirements. The full list is on this page.

We haven't published Royal City's sign setback rules on this page yet. Run a code check for an exact address to see them.

Rules in Royal City's sign ordinance that cover digital, changing, or flashing signs: Flashing signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Royal City Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Royal City, Washington, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Royal City, Washington Sign Rules at a Glance

Royal City, Washington regulates 43 sign types across 6 zoning districts. Sandwich Board Signs in the Commercial zones, Industrial zones are capped at 4' tall, 8 sq ft per face, and 2' wide. Most commercial signs in Royal City require a permit.

Detailed Sign Ordinance Requirements for Royal City, Washington

Sign Rules by Zoning District in Royal City (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Commercial zones, Industrial zones1945'350 sq. ft. per siteNot listed
Agricultural zone, Municipal Airport zone1Contained within outline of facade25% of each facade; no individual sign larger than 15% of a facadeNot listed
R-3 zone3Contained within outline of facade12 sq. ft. combined with free-standing signsNot listed
Public zones3See applicable base sign typeSee applicable base sign typeNot listed
Residential zones58'32 sq. ft. per siteNot listed
General Regulations For All Zones17Same as wall sign2 sq. ft. per sign, one sign per dispenserNot listed

Zone-by-Zone Sign Requirements in Royal City(sample of 3 of 6 zones)

Commercial zones, Industrial zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Architectural Appendage SignFlush-mounted or suspended under appendage; minimum 8' clearance above grade if suspendedSee Building signNot listedNot listedNot listedExterior of building; commercial and industrial zones onlyNot listedUnlock17.58.030; Table, Architectural Appendage row
Building SignContained within outline of facade25% of each facade; no individual sign larger than 15% of a facadeNot listedNot listedNot listedOn building facadesNot listedUnlock17.58.030; Table, Building row
Changeable Copy Sign25' for free-standing, freeway or freeway interchange sign; or wall height for wall signSee applicable base sign typeNot listedNot listedNot listedApplies to building, wall, free-standing, freeway, or temporary signsNot listedUnlock17.58.030; Table, Changeable Copy row
Community SignSee applicable base sign typeSee applicable base sign typeNot listedNot listedNot listedBuilding or free-standingNot listedUnlock17.58.030; Table, Community row
Construction Sign8'32 sq. ft. per street frontage per construction siteNot listedNot listed1 per street frontageOn construction siteNot listedUnlock17.58.030; Table, Construction row
Directional Sign6' (for free-standing); wall height for wall sign8 sq. ft. per signNot listedNot listedNot listedOn site, construction or directing trafficNot listedUnlock17.58.030; Table, Directional row
Free-standing Sign25'150 sq. ft. per site; if street frontage > 300', additional 150 sq. ft. per 300' incrementNot listedNot listedUp to two per 300' of frontage, see additional requirementsCommercial & industrial zones only; one per site without street frontage; up to two per each 300' of street frontage.Not listedUnlock17.58.030; Table, Free-standing row
Sandwich Board Sign4'8 sq. ft. per face2'Not listedNot listedOn-site; or within right-of-way with city council approvalNot listedUnlock17.58.030; Table, Sandwich Board row

Residential zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Garage Sale SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.58.030; Table, Garage Sale row
Home Occupation SignSame as for wall sign2 sq. ft. per residential dwelling unit with home occupation licenseNot listedNot listed1 per dwelling unitOn wall of dwelling with home occupationNot listedUnlock17.58.030; Table, Home Occupation row
Real Estate, Residential LotNo limit6 sq. ft. per signNot listedNot listedNot listedResidential lot or parcelNot listedUnlock17.58.030; Table, Real Estate, Residential Lot row
Residential Identification Sign8'32 sq. ft. per siteNot listedNot listedNot listedResidential subdivisions and similar developmentsNot listedUnlock17.58.030; Table, Residential Identification row
Residential Subdivision Sign8'32 sq. ft. per subdivision/manufactured home binding site plan/or residential planned developmentNot listedNot listedNot listedSubdivision or similar residential developmentNot listedUnlock17.58.030; Table, Residential Subdivision row

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Abandoned SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.58.030; Table, Abandoned row
BillboardNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.58.030; Table, Billboard row
Dilapidated or Hazardous SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.58.030; Table, Dilapidated or hazardous condition row
Flashing SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.58.030; Table, Flashing row
Political SignNot listedNot listedNot listedNot listedNot listedPrivate property or in right-of-way adjacent to private property with owner's permissionNot listedUnlock17.58.030; Table, Political row
Temporary Gas Pump SignNot listed2 sq. ft. per sign, one sign per dispenserNot listedNot listed1 per dispenserOn gas pumpNot listedUnlock17.58.030; Table, Temporary Gas Pump row
Temporary Sign On WallSame as wall signSee Building signNot listedNot listedNot listedOn wallNot listedUnlock17.58.030; Table, Temporary Sign On Wall row
Vehicle SignFlush-mounted to vehicleNot listedNot listedNot listedNot listedOn vehicle used primarily for transportationNot listedUnlock17.58.030; Table, Vehicle row

PermitPal covers all 6 zoning districts in Royal City. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Royal City

  • Billboards are prohibited.
  • Abandoned signs are prohibited.
  • Flashing signs are prohibited.
  • Signs in a dilapidated or hazardous condition as determined by the Building Official are prohibited.
  • Signs which could be confused with or obstruct the view of a traffic sign or signal, as determined by city engineer, are prohibited.
  • Signs which restrict ingress to or egress from a building are prohibited.
  • Signs on vehicles other than vehicle signs are prohibited.
  • No sign is allowed on or over right-of-way except as approved by city council for city streets.
  • No sign is allowed within right-of-way of the interstate or primary system where there are no curbs.
  • No permanent sign is allowed on or over a public utility easement.
  • A sign shall comply with applicable provisions of the state building code and Chapter 15.20 of this code.
  • A sign is subject to Chapter 8.21 of this code entitled Nuisances.
  • State law (RCW 70.54.090) prohibits the attachment of a sign to a utility pole.
  • No sign shall be erected or maintained if it is visible from the main traveled way of the interstate or primary system except as permitted by WAC 468-66 or RCW 47.42.
  • A sign type that is not listed in the sign table is not allowed to be displayed.

Exempt Signs in Royal City

  • Government flags are exempt.
  • Official signs or legal notices issued by a court, public agency, or as authorized by law or federal, county, or city authority are exempt.
  • Open, Closed, Business Hours, Address, or Greeting signs are exempt.
  • Private warning/directional signs (e.g., KEEP OUT, NO TRESPASSING) are exempt.
  • Traffic control signs as defined in the Manual on Uniform Traffic Control Devices are exempt.
  • The replacement of the face or faces of a cabinet sign is exempt from sign permit requirements.
  • Maintenance of a sign or sign structure (by repair, replacement of parts, cleaning, or touch-up) is exempt from sign permit requirements.
  • Sign removal without any sign installation is exempt from sign permit requirements.

Sign Plan & Submission Notes for Royal City

  • A site plan is required as part of the sign permit application for new, replacement, or certain types of signs.
  • Planning agency review and approval is required for signs for a conditional use in the R-3 zone, certain free-standing signs on vacant sites, public zone signs (other than public or recreational facility identification), residential identification signs in residential zones, and others as specified in the ordinance.
  • A variance application and hearing before the hearing examiner is required for requests to deviate from sign regulations.
  • An inventory of each and every existing sign on the site is required as part of the sign permit application.
  • A completed sign permit application is required for all signs unless specifically exempted; the application must include a site plan, scaled sign drawings, and an inventory.

Source: municode municipal code