Questions? Call us at (262) 218-2915

Sign Regulations in Union Gap, Washington

Union Gap, Washington has specific sign regulations covering 20 sign types across 3 zoning districts. Regulated sign types include Freestanding Sign, Projecting Sign, Portable Sign (including Sandwich Board). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 5, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Union Gap, Washington

Sample Sign Requirements in Union Gap

Sign TypeMax HeightMax AreaSetback
Freestanding SignNot listedNot listedIf under 8 ft ground clearance and within 15 ft of driveway, curb cut, or road, setback min 10 ft from street curb/edge.
Projecting SignMay not exceed building height except 1/3 of sign may project above building; and must otherwise comply with Uniform Sign Code; see 17.08.080Not listedSee additional requirements re: projection over ROW
Portable Sign (including Sandwich Board)Not listedNot listedSee sidewalk sign requirements; not to be in required parking space, driveway, or clearview triangle

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Union GapFull Coverage

Sign Types Covered

20

  • Freestanding Sign
  • Projecting Sign
  • Portable Sign (including Sandwich Board)
  • Sidewalk Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Union Gap

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

This page doesn't give a single height number for signs in Union Gap. The tables on this page quote the ordinance's height rules for the sign types we sampled. For example, the height rule for Wall Sign in the Commercial District (C-1, C-2, CBD) and other zoning districts reads: Cannot extend above height of wall; wall sign may not project more than 12 inches. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Union Gap require a permit. From the submission notes on this page: Sidewalk signs require the filing of a site plan with the application identifying the proposed location of the sidewalk sign and ensuring ADA compliance. Run a code check for an exact address to see the permit requirements for that zone.

Union Gap's sign code covers 20 sign types, including Freestanding Sign, Projecting Sign, Portable Sign (including Sandwich Board), and Sidewalk Sign. Most commercial signs need a permit. The ordinance lists 18 exemptions. One of them: Gravestones. The full list is on this page.

This page doesn't list a single setback distance for signs in Union Gap. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Union Gap's sign code lists Digital Sign as a sign type, but this page doesn't quote the code's rules for digital or LED signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Union Gap Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Union Gap, Washington, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Union Gap, Washington Sign Rules at a Glance

Union Gap, Washington regulates 20 sign types across 3 zoning districts. Construction Signs are capped at 32 sq ft (Sec. 17.08.040L). Most commercial signs in Union Gap require a permit.

Detailed Sign Ordinance Requirements for Union Gap, Washington

Sign Rules by Zoning District in Union Gap (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Commercial District (C-1, C-2, CBD), Industrial District (L-I, W/W), Planned Regional Commercial District (PrC), Commercial Use in Residential Districts (R-3, R-4)11Cannot extend above height of wall; wall sign may not project more than 12 inches300 sq ftNot listed
Residential District (R-1, R-2, R-3, R-4)3Not listed40 sq ftNot listed
General Regulations For All Zones6Not listed32 sq ftNot listed

Zone-by-Zone Sign Requirements in Union Gap

Commercial District (C-1, C-2, CBD), Industrial District (L-I, W/W), Planned Regional Commercial District (PrC), Commercial Use in Residential Districts (R-3, R-4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding SignNot listedNot listedNot listedIf under 8 ft ground clearance and within 15 ft of driveway, curb cut, or road, setback min 10 ft from street curb/edge.One freestanding sign per primary public road frontage; one additional for each 400 ft of additional frontage or option for single sign meeting larger dimension standards (for multiple-building complexes/tenants).On-premises, supporting uprights, poles or braces on/in ground, only on street frontage servedNot listedUnlock17.08.060A, 17.08.070, 17.08.030, 17.08.115, 17.05.040
Projecting SignMay not exceed building height except 1/3 of sign may project above building; and must otherwise comply with Uniform Sign Code; see 17.08.080Not listedNot listedSee additional requirements re: projection over ROWNot listedOn-premises, attached to and projects from buildingNot listedUnlock17.08.060A, 17.08.080, 17.08.050D, 17.08.030
Portable Sign (including Sandwich Board)Not listedNot listedNot listedSee sidewalk sign requirements; not to be in required parking space, driveway, or clearview triangleSidewalk sign: 1 per business per street frontageOn-premises, not attached to ground or structureNot listedUnlock17.08.060A, 17.08.115, 17.08.040
Sidewalk SignNot listedNot listedNot listedMust maintain 4 feet of sidewalk clearance at all times1 per business per street frontageOn public sidewalk along business front (minimum 4-feet pedestrian clearance on sidewalk must remain), only in commercial or industrial zoning or commercial use in R-3, R-4Not listedUnlock17.08.115
Freeway SignNot listed300 sq ftNot listedNot listed1 per parcel within 1,000 ft of I-82 ROW (in addition to other permitted signs)On parcel within 1,000 ft of I-82 right-of-wayNot listedUnlock17.08.060B
Multiple-Building Complex & Multiple-Tenant Building Freestanding SignNot listedNot listedNot listedSee general freestanding sign setback requirements1 per building/complex per 400 ft road frontage; option for single larger signWithin C-1, C-2, CBD, L-I, W/W, PrC, and commercial use in R-3, R-4Not listedUnlock17.08.020 (definition), 17.08.060A
Wall SignCannot extend above height of wall; wall sign may not project more than 12 inchesTotal area not to exceed total wall area where attachedNot listedNot listedNot regulated; total area restriction appliesAttached, painted, or erected parallel to wall of buildingNot listedUnlock17.08.100
Digital SignNot listedNot listedNot listedNot listed1 per 100 linear feet of street frontageMust comply with all district/use/location rulesNot listedUnlock17.08.120

Residential District (R-1, R-2, R-3, R-4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate SignNot listed6 sq ftNot listedNot listed1 per propertyPertains only to the sale, lease, rent, or hire of the particular building/propertyNot listedUnlock17.08.125A
Nameplate SignNot listed4 sq ftNot listedNot listedNot listedFlush-mounted to principal building; bearing only name/occupation of occupantNot listedUnlock17.08.125B
Use Identification Sign (Institutional)Not listed40 sq ftNot listedNot listed1 per institutionFor schools, churches, government buildings, hospitals, nursing homes, where permittedNot listedUnlock17.08.125C

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Window SignNot listedNot listedNot listedNot listedNot listedWithin window or upon window panes; visible from outsideNot listedUnlock17.08.040A
On-Premises Directional SignNot listedNot listedNot listedNot listedNot listedOn premises; for directionNot listedUnlock17.08.040Q
Official FlagNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.08.040J
Political SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.08.040K
Construction SignNot listed32 sq ftNot listedNot listedNot listedOn the site undergoing constructionNot listedUnlock17.08.040L
Readerboard (Church/School/Community Center)Not listed32 sq ftNot listedNot listedNot listedAt church, school, or community centerNot listedUnlock17.08.040N

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Union Gap with a free PermitPal account.

Run a free code check

Prohibited Signs in Union Gap

  • Signs on any vehicle or trailer that is parked on public or private property and visible from a public right-of-way, except for identification of a firm or its principal products on a vehicle operating during the normal course of business, automobile for sale signs, or signs attached to franchised buses or taxis.
  • Signs which, by reason of their size, location, movement, content, coloring, or manner of illumination, may be confused with or construed as a traffic control sign, signal, or device, or the light of any emergency or utility vehicle, or which obstruct the visibility of any traffic or street sign or signal device. Signs that imitate or resemble an official traffic sign or signal, or which bear the words "stop," "caution," "danger," "warning," or similar words.
  • Signs attached to utility, street light, and traffic-control standard poles.
  • Swinging projecting signs.
  • Signs in a dilapidated or hazardous condition, including those with peeling paint, major cracks or holes, or loose or dangling materials.
  • Abandoned signs.
  • Signs on doors, windows, or fire escapes that restrict free ingress or egress.
  • All off-premises signs are prohibited except as provided for permitted off-premises signs and multiple-building complex/tenant signs.
  • Any other sign not meeting the provisions of this chapter.
  • Signs not maintained in good order and repair, so that they constitute a danger or hazard to public safety, or have peeling paint, major cracks, or loose and dangling materials.

Exempt Signs in Union Gap

  • Window signs.
  • Point of purchase displays, such as product dispensers.
  • Gravestones.
  • Barber poles.
  • Historical site plaques.
  • Structures intended for a separate use, such as phone booths.
  • Goodwill containers, etc.
  • Official and legal notices issued by any court, public body, person or officer in performance of a public duty, or in giving any legal notice.
  • Directional, warning or information signs or structures required or authorized by law, or by federal, state, county, or city authority.
  • Official flags of the United States of America, states of the United States, counties, municipalities, official flags of foreign nations, and flags of internationally and nationally recognized organizations.
  • Political signs which, during a campaign, advertise a candidate or candidates for public elective office, a political party, or promote a position on a public issue, provided such signs are removed within fifteen (15) days following the election.
  • Construction and real estate signs not exceeding thirty-two (32) square feet in sign area.
  • All temporary signs (see Section 17.08.110), except portable signs.
  • Church, school, or community center name, and readerboards not exceeding thirty-two (32) square feet in sign area.
  • Canopy and awning signs.
  • On-premises signs not readable from the public right-of-way, i.e., menu-boards, etc.
  • On-premises directional signs.
  • Official public or court notices issued by a government agency, or body, or required or provided for under adopted statute.

Sign Plan & Submission Notes for Union Gap

  • No sign governed by this title shall be erected, structurally altered or relocated after the adoption of this title without first receiving a development permit from the building official.
  • Structural changes to, or replacement of, an existing sign requires Class (1) review and approval by the building official.
  • Sidewalk signs require the filing of a site plan with the application identifying the proposed location of the sidewalk sign and ensuring ADA compliance.

Source: municode municipal code