Sign Regulations in Clinton, Wisconsin
Clinton, Wisconsin has specific sign regulations covering 27 sign types across 5 zoning districts. Regulated sign types include Temporary Sign (General), Wall Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Sign Regulation Overview for Clinton, Wisconsin
Sample Sign Requirements in Clinton
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Address Numeral/Nameplate Sign | — | 2 sq ft | — |
| Window Sign | — | 25% of interior window area | — |
| Temporary Sign (General) | — | See detailed provisions in Sec. 50-978 | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
PermitPal Coverage for ClintonFull Coverage
Sign Types Covered
27
- Temporary Sign (General)
- Wall Sign
- Projecting Sign
- Canopy/Marquee/Awning Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Clinton
Other Cities in Wisconsin
Frequently Asked Questions
Sign height limits in Clinton vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Clinton, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Clinton, regulated sign types include Temporary Sign (General), Wall Sign, Projecting Sign, Canopy/Marquee/Awning Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Clinton vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Clinton are regulated with specific requirements for brightness, animation, and message duration. Clinton has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
AI-Powered Research
Ready to Research Clinton Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Clinton, Wisconsin sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Clinton, Wisconsin Sign Rules at a Glance
Clinton, Wisconsin regulates 27 sign types across 5 zoning districts. Freestanding Identification Sign (3+ Units)s in the Residential zoning districts zoning district are capped at 5 ft (3-8 units); 8 ft (9+ units) tall and 8 sq ft (3-4 units); 16 sq ft (5-8 units); 24 sq ft (9+ units), with a Must not encroach on or overhang public right-of-way or pedestrian/vehicular areas setback (Sec. Sec. 50-976(a)(2)). Most commercial signs in Clinton require a permit.
Detailed Sign Ordinance Requirements for Clinton, Wisconsin
Sign Rules by Zoning District in Clinton (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 9 | — | See detailed provisions in Sec. 50-978 | — |
| Residential zoning districts | 8 | 8 ft | As specified in Sec. 50-978 (e.g., for sale sign 12 sq ft, construction sign 32 sq ft) | — |
| C-1, C-2, C-4 | 9 | 8 ft if freestanding | 50 sq ft per building frontage; 32 sq ft per building rear with public entrance | — |
| C-3, PO, I-1, I-2, I-3 | 9 | Monument: 8 ft; Other Freestanding: 32 ft | 150 sq ft per building frontage; 50 sq ft per building rear (public entrance) | — |
| Central Commercial District (C-1) | 1 | 4 ft | 8 sq ft | — |
Zone-by-Zone Sign Requirements in Clinton(sample of 3 of 5 zones)
Residential zoning districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Identification Sign (1-2 Dwelling Units) | — | 2 sq ft | — | — | 1 per dwelling unit | Per dwelling unit | — | Unlock | Sec. 50-976(a)(1) |
| Wall Identification Sign (3+ Units) | — | 8 sq ft (3-4 units); 16 sq ft (5-8 units); 24 sq ft (9+ units) | — | — | 1 per street frontage | One per street frontage | — | Unlock | Sec. 50-976(a)(2) |
| Freestanding Identification Sign (3+ Units) | 5 ft (3-8 units); 8 ft (9+ units) | 8 sq ft (3-4 units); 16 sq ft (5-8 units); 24 sq ft (9+ units) | — | Must not encroach on or overhang public right-of-way or pedestrian/vehicular areas | 1 per street frontage | One per street frontage | — | Unlock | Sec. 50-976(a)(2) |
| Monument Identification Sign (Subdivision) | 8 ft | 32 sq ft | — | — | One per entrance, maximum 2 entrances | One per subdivision entrance (max 2 entrances) | — | Unlock | Sec. 50-976(a)(3) |
| Wall Identification Sign (Other Principal Uses) | — | 40 sq ft; up to 60 sq ft by frontage formula | — | — | 1 per street frontage | One per street frontage | — | Unlock | Sec. 50-976(a)(4) |
| Freestanding Identification Sign (Other Principal Uses) | 8 ft | 40 sq ft; up to 60 sq ft by frontage formula | — | Must not encroach on or overhang public right-of-way or pedestrian/vehicular areas | 1 per street frontage | One per street frontage | — | Unlock | Sec. 50-976(a)(4) |
| Directional Sign (Wall or Freestanding) | Same as freestanding identification sign for premises | 6 sq ft | — | — | 1 per entrance/exit & 1 per parking area | One per entrance/exit and one per parking area | — | Unlock | Sec. 50-976(a)(6) |
| Temporary Sign (Residential) | — | As specified in Sec. 50-978 (e.g., for sale sign 12 sq ft, construction sign 32 sq ft) | — | — | Subject to Sec. 50-978 | — | — | Unlock | Sec. 50-976(a)(7); Sec. 50-978 |
C-1, C-2, C-4
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | No higher than the nearest portion of the building it is mounted on | 50 sq ft per building frontage; 32 sq ft per building rear with public entrance | — | — | One per business per street frontage/building rear | Building wall, per frontage | — | Unlock | Sec. 50-977(a)(1); Table 50-10 |
| Projecting Sign | — | 24 sq ft | — | — | One per business or one set per multi-tenant building | Attached to building face | — | Unlock | Sec. 50-977(a)(1); Table 50-10 |
| Canopy/Marquee/Awning Sign | — | Counted toward projecting sign area (24 sq ft) | — | — | One per business | On canopy/marquee/awning | — | Unlock | Sec. 50-977(a)(2) |
| Freestanding Sign | Monument signs: 5 ft; Other freestanding: 12 ft | 24 sq ft | — | Must not violate lot line or visibility triangle | One | On lot; not extending past lot line/visibility triangle | — | Unlock | Sec. 50-977(b)(1); Table 50-11 |
| Movable Signage Board | 4 ft | 8 sq ft | Max width 30% of sidewalk width (C-1 only) | — | One per business | C-1: On sidewalk <10 ft from entrance with min 6 ft sidewalk passage. C-2, C-4: On same lot, outside right-of-way, not in access/parking. | — | Unlock | Sec. 50-977(d) |
| Incidental Sign | — | Not to exceed 25% of maximum permitted area; calculated independently | — | — | — | Affixed to building wall or freestanding sign | — | Unlock | Sec. 50-977(c)(1) |
| Directional Sign (Entrance/Exit) | 8 ft if freestanding | 6 sq ft | — | — | One per entrance/exit | One per entrance/exit | — | Unlock | Sec. 50-977(c)(2) |
| Directional Sign (Parking/Loading/Receiving) | 8 ft if freestanding | 9 sq ft | — | — | One per area | One per parking/loading/receiving area | — | Unlock | Sec. 50-977(c)(2) |
C-3, PO, I-1, I-2, I-3
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | No higher than the nearest portion of building it is mounted on | 150 sq ft per building frontage; 50 sq ft per building rear (public entrance) | — | — | One per business per street frontage/building rear | Building wall, per frontage | — | Unlock | Sec. 50-977(a)(1); Table 50-10 |
| Projecting Sign | — | 48 sq ft | — | — | One per business or one set per multi-tenant building | Attached to building face | — | Unlock | Sec. 50-977(a)(1); Table 50-10 |
| Canopy/Marquee/Awning Sign | — | Counted toward projecting sign area (48 sq ft) | — | — | One per business | On canopy/marquee/awning | — | Unlock | Sec. 50-977(a)(2) |
| Freestanding Sign | Monument: 8 ft; Other Freestanding: 32 ft | 150 sq ft | — | Must not violate lot line or visibility triangle | One per street frontage; one additional for every 300 ft beyond initial 300 ft | On lot; not extending past lot line/visibility triangle | — | Unlock | Sec. 50-977(b)(1); Table 50-11 |
| Movable Signage Board | 4 ft | 8 sq ft | — | — | One per business | On same lot, outside right-of-way, not in access/parking | — | Unlock | Sec. 50-977(d)(1)b and (2)-(3) |
| Incidental Sign | — | Not to exceed 25% of maximum permitted area; calculated independently | — | — | — | Affixed to building wall or freestanding sign | — | Unlock | Sec. 50-977(c)(1) |
| Directional Sign (Entrance/Exit) | 8 ft if freestanding | 6 sq ft | — | — | One per entrance/exit | One per entrance/exit | — | Unlock | Sec. 50-977(c)(2) |
| Directional Sign (Parking/Loading/Receiving) | 8 ft if freestanding | 9 sq ft | — | — | One per area | One per parking/loading/receiving area | — | Unlock | Sec. 50-977(c)(2) |
PermitPal covers all 5 zoning districts in Clinton — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 5 zones for Clinton — start freeProhibited Signs in Clinton
- No sign shall use any word, phrase, symbol, shape, form or character in such a manner as to interfere with moving traffic, nor shall any sign incorporate any signage, designs, colors or patterns characteristic of street or traffic control signs or signals.
- No fluttering, undulating, swinging, rotating or otherwise moving signs, pennants or other commercial decorations shall be permitted except for time and/or temperature signs, and except for on-premise scrolling messages, traveling at a rate of at least 16 light columns per second and no faster than 32 columns per second.
- Except for time and/or temperature signs, no illuminated flashing or changeable message signs shall be permitted, unless each message remains in a fixed position for at least six seconds, and the change in message is accomplished in one second or less.
- All illuminated signs shall comply with the state electrical code.
- No mobile or portable signs shall be permitted.
- Except as authorized by this article, off-premises directional signs shall be permitted within public rights-of-way only if designed to convey information relating to the general interest to the residents of the village regarding public institutions and/or scheduled public events or activities for governmentally owned public institutions, schools, and churches.
- No billboards or other off-premise advertising signs shall be permitted within the village limits, except as authorized by the statutes of the state.
- No inflatable signs shall be permitted.
- No commercial advertising message shall be placed on any fence owned by the village.
- No sign shall be erected or maintained at any location where, by reason of its position, wording, illumination, size, shape or color it may obstruct, impair, obscure, interfere with the view of or be confused with, any authorized traffic control sign, signal or device, or be erected contrary to any provision of this Code.
- No sign shall be located within a required buffer yard or within a permanently protected green space area, according to the definitions of these terms in Section 50-11.
- No sign shall be mounted on a building roof or extend above the roof, if attached to a building.
- No sign, temporary or otherwise, shall be affixed to a tree or utility pole or situated within a public right-of-way, except as authorized by this article or as authorized by the village public works director.
Exempt Signs in Clinton
- Address numerals and nameplates, altogether not exceeding two square feet in area, for each residential, commercial or industrial building.
- Legal notices.
- Signs established by, or by order of, any governmental agency, such as traffic control, parking restrictions, information and notices, except as regulated under section 50-977 (c), 'Incidental and Directional Signs.'
- Memorial signs, tablets, names of buildings and date of erection when cut into any masonry surface or when constructed of metal and affixed flat against a structure.
- On-premises directional signs that include no advertising, according to the definition and use regulations contained in this article.
- Window signs placed inside commercial buildings and not covering more than 25 percent of the interior window area. No equipment, furniture or other items, including signage, shall cause more than 25 percent of any window area to be visually obstructed.
- Temporary signs, including community information signs, which conform to the requirements of this article.
- Temporary signs or banners when authorized by the village board and/or plan commission.
- Political and campaign signs, provided that such signs, along with permitted temporary signs under section 50-978 not exceed a total area of 32 square feet.
Sign Plan & Submission Notes for Clinton
- No person shall erect, alter or relocate within the village any sign without first obtaining a sign permit, unless specifically exempted by this chapter.
- A completed sign permit application shall include plans and specifications showing sign placement, dimensions, materials and required details of construction, including weight and anchorage.
- When signage is reviewed as part of a site plan review process under Article IV of this chapter, then a sign permit application and fee shall be filed.
- A sign plan may be submitted for a nonresidential property having more than one tenant, as long as the maximum areas and maximum number of signs for each sign type are not exceeded.
Source: municode municipal code