Sign Regulations in Union Springs, Alabama
Union Springs, Alabama has specific sign regulations covering 13 sign types across 2 zoning districts. Regulated sign types include Off-Premise Advertising Sign, Off-Premise Directional Sign, On-Premise Freestanding Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 9, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Union Springs, Alabama
Sample Sign Requirements in Union Springs
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Off-Premise Advertising Sign | 30 feet | 378 square feet per sign face; one sign face per directional flow of traffic | See additional requirements for zone-specific setbacks. |
| Off-Premise Directional Sign | 6 feet | 32 square feet per sign face | Not listed |
| On-Premise Freestanding Sign | 30 feet | 300 square feet | Minimum 15 feet setback |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
13
- Off-Premise Advertising Sign
- Off-Premise Directional Sign
- On-Premise Freestanding Sign
- Wall Sign (Single Tenant)
- +2 more types
Zoning Districts
2
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Union Springs
Other Cities in Alabama
Frequently Asked Questions
In Union Springs, the height limit for On-Premise Freestanding Sign in the Industry (M-1) and other zoning districts is 30 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Union Springs require a permit. From the submission notes on this page: On-premise signs are deemed compliant if they are specifically included as part of a sign plan approved as a condition of, or pursuant to, a special use permit. Run a code check for an exact address to see the permit requirements for that zone.
Union Springs's sign code covers 13 sign types, including Off-Premise Advertising Sign, Off-Premise Directional Sign, On-Premise Freestanding Sign, and Wall Sign (Single Tenant). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Signs carried by people. The full list is on this page.
This page doesn't list a single setback distance for signs in Union Springs. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Union Springs's sign ordinance that cover digital, changing, or flashing signs: Signs with animated, blinking, chasing, flashing or moving effects except as used to display time, temperature and messages on an electronic message board. No signs shall contain flashing lights. Animated, rotating, or other moving or apparently moving signs. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Union Springs Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Union Springs, Alabama, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Union Springs, Alabama Sign Rules at a Glance
Union Springs, Alabama regulates 13 sign types across 2 zoning districts. Off-Premise Directional Signs in the Industry (M-1) and other zoning districts are capped at 6 feet tall and 32 square feet per sign face (Sec. 11.10). Most commercial signs in Union Springs require a permit.
Detailed Sign Ordinance Requirements for Union Springs, Alabama
Sign Rules by Zoning District in Union Springs (2 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Industry (M-1), Highway Business (B-2), Local Business (B-1), Agricultural - Open (A-O) | 10 | 30 feet | 378 square feet per sign face; one sign face per directional flow of traffic | Not listed |
| General Regulations For All Zones | 3 | Not listed | 150 square feet (total for all signs at a single entrance) | Not listed |
Zone-by-Zone Sign Requirements in Union Springs
Industry (M-1), Highway Business (B-2), Local Business (B-1), Agricultural - Open (A-O)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Off-Premise Advertising Sign | 30 feet | 378 square feet per sign face; one sign face per directional flow of traffic | Not listed | See additional requirements for zone-specific setbacks. | Not listed | Permitted as a principal or accessory use incidental to the principal land use | Not listed | Unlock | Section 11.9.1-11.9.8 |
| Off-Premise Directional Sign | 6 feet | 32 square feet per sign face | Not listed | Not listed | No more than three off-premise directional signs for the same business/activity | Not specified; generally off-premise | Not listed | Unlock | Section 11.10 |
| On-Premise Freestanding Sign | 30 feet | 300 square feet | Not listed | Minimum 15 feet setback | One per street frontage | On-premise, minimum 15 feet setback from property line | Not listed | Unlock | Section 11.5 (a)-(d) |
| Wall Sign (Single Tenant) | Not listed | 200 square feet | Not listed | Not listed | Not listed | Building mounted | Not listed | Unlock | Section 11.5 (e) |
| Wall Sign (Multi-Tenant Building) | Not listed | 200 square feet per tenant | Not listed | Not listed | Not listed | Building mounted | Not listed | Unlock | Section 11.5 (f) |
| Awning Sign | Not listed | 40 square feet per sign (per drop leaf portion of awning) | Not listed | Not listed | Not listed | Drop leaf portion of awning | Not listed | Unlock | Section 11.5 (h) |
| Marquee Sign | 8 feet (height of message area) | 200 square feet | Not listed | Not listed | One per establishment | On theater, auditorium, or assembly hall marquee | Not listed | Unlock | Section 11.5 (i) |
| Fuel Canopy Sign | Not listed | 12 square feet per canopy side | Not listed | Not listed | Not listed | Fuel canopy | Not listed | Unlock | Section 11.5 (j) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Home Occupation Sign | Not listed | 6 square feet | Not listed | Not listed | One per dwelling unit | Residential dwelling | Not listed | Unlock | Section 11.6 |
| Subdivision/Multi-Family Development Entrance Sign | Not listed | 100 square feet (total for all signs at a single entrance) | Not listed | Not listed | Not more than two per entrance | Entrance to residential subdivision or multi-family development | Not listed | Unlock | Section 11.7 |
| Industrial Park Entrance Sign | Not listed | 150 square feet (total for all signs at a single entrance) | Not listed | Not listed | Not more than two per entrance | Entrance to industrial park | Not listed | Unlock | Section 11.8 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Union Springs with a free PermitPal account.
Run a free code checkProhibited Signs in Union Springs
- No sign shall be constructed, erected, modified, placed, maintained, or moved, except as authorized by this zoning ordinance.
- No sign shall be placed within a public right-of-way or within the sight triangle of a roadway intersection as determined by the Alabama Department of Transportation.
- The following signs are prohibited: any non-governmental sign which resembles a public safety warning or traffic sign.
- Signs with animated, blinking, chasing, flashing or moving effects except as used to display time, temperature and messages on an electronic message board. No signs shall contain flashing lights.
- Animated, rotating, or other moving or apparently moving signs.
- Signs must not be of such intensity or brilliance or glare or impair the vision of the driver of any motor vehicle or otherwise interfere with any driver's operation of a motor vehicle.
- No sign shall be so illuminated that it interferes with the effectiveness of or obscures an official traffic sign, device or signal.
- No sign shall be allowed to stand with bent or broken sign facing, broken supports, loose appendages or struts.
- No sign or sign structure shall be allowed to have weeds, vines or other vegetation growing on it and obscuring it from the road or highway from which it is intended to be viewed.
- No illuminated sign shall be allowed to operate with partial illumination.
Exempt Signs in Union Springs
- Commemorative tablets or signs, historical or memorial markers or monuments, erected by or with the permission of the Union Springs City Council or the Alabama Department of Transportation.
- Any official traffic control or other public sign.
- Lights and decorations with no commercial message temporarily displayed on traditionally adopted civic, patriotic or religious holidays.
- Signs carried by people.
- Signs located on the interior of buildings, courts, lobbies, stadiums or other structures which are not intended to be seen from the exterior of such structures.
- Signs not visible from a public or private street.
Sign Plan & Submission Notes for Union Springs
- On-premise signs are deemed compliant if they are specifically included as part of a sign plan approved as a condition of, or pursuant to, a special use permit.
- For Planned Building Groups, building mounted signage must be approved in the Conditional Use Permit process.
Source: municode municipal code