Sign Regulations in Florence, Colorado
Florence, Colorado has specific sign regulations covering 8 sign types across 7 zoning districts. Regulated sign types include Wall Sign, Pole Sign, Ground Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Florence, Colorado
Sample Sign Requirements in Florence
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | Not listed | 9 sq. ft. per dwelling unit | Not listed |
| Pole Sign | 5 feet | 9 sq. ft. per dwelling unit | Not listed |
| Ground Sign | 5 feet | 9 sq. ft. per dwelling unit | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
8
- Wall Sign
- Pole Sign
- Ground Sign
- Projecting Sign
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Florence
Other Cities in Colorado
Frequently Asked Questions
In Florence, the height limit for Pole Sign in the Commercial (C-1) zoning district is 20 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Florence require a permit. From the submission notes on this page: Any multiple-tenant nonresidential building or development existing at the time of code adoption without a comprehensive sign plan must create one at the time of application for a new sign at the site. Run a code check for an exact address to see the permit requirements for that zone.
Florence's sign code covers 8 sign types, including Wall Sign, Pole Sign, Ground Sign, and Projecting Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: A sign permit is not required for the display of a sign or group of signs, whose total square footage equals nine (9) square feet or less per property. The full list is on this page.
We haven't published Florence's sign setback rules on this page yet. Run a code check for an exact address to see them.
Rules in Florence's sign ordinance that cover digital, changing, or flashing signs: Moving, flashing, rotating, blinking, or animated signs, signs with moving, rotating, or flashing lights, or signs that create the illusion of movement are prohibited, except for time and temperature devices. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Florence Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Florence, Colorado, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Florence, Colorado Sign Rules at a Glance
Florence, Colorado regulates 8 sign types across 7 zoning districts. Pole Signs in the Industrial zoning district are capped at 20 feet tall. Most commercial signs in Florence require a permit.
Detailed Sign Ordinance Requirements for Florence, Colorado
Sign Rules by Zoning District in Florence (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential (R-1, R-2, R-3, R-E, MH) | 4 | 5 feet | 9 sq. ft. per dwelling unit | Not listed |
| Commercial Use in a Residential Zone | 1 | Not listed | 9 sq. ft. per dwelling unit, or as otherwise permitted by special use | Not listed |
| Commercial Historic Business Zone (CHB) | 3 | Not above roofline | 50 sq. ft. (or less, if building frontage is less than 50 ft.) | Not listed |
| Commercial (C-1) | 5 | 20 feet | First floor: up to 100 sq. ft. per frontage; Secondary street frontage: half sq. ft. of primary frontage with total max 200 sq. ft. per property | Not listed |
| Industrial | 5 | 20 feet | First floor: up to 100 sq. ft. per frontage; Secondary street: half sq. ft. of primary frontage, total max 200 sq. ft. per property | Not listed |
| All other Commercial and Industrial Zones | 5 | 20 feet | First floor: up to 100 sq. ft. per frontage; Secondary street: half sq. ft. of primary frontage; total max 200 sq. ft. per property | Not listed |
| General Regulations For All Zones | 3 | Not listed | 16 sq. ft. in commercial zones | Not listed |
Zone-by-Zone Sign Requirements in Florence(sample of 3 of 7 zones)
Commercial (C-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not above eave line or parapet wall | First floor: up to 100 sq. ft. per frontage; Secondary street frontage: half sq. ft. of primary frontage with total max 200 sq. ft. per property | Not listed | Not listed | Not listed | On building wall, below eave/parapet | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(P), 17.64.190.05(D), 17.64.190.04(G) |
| Pole Sign | 20 feet | Each not to exceed 50 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(K), 17.64.190.04(G) |
| Ground Sign | 8 feet | Each not to exceed 50 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(F), 17.64.190.04(G) |
| Projecting Sign | Not above eave/parapet line | Included in aggregate sign area (see wall sign) | May not extend more than 4 ft 6 in from wall | Not listed | Not listed | Projecting from building wall | Not listed | Unlock | 17.64.190.04(L), Table 1, Table 2 |
| Electronic Variable Message Sign (EVM) | Not listed | 40 sq. ft.; 60 sq. ft. along Highway 50 | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 2, 17.64.190.05(D) |
Industrial
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not above eave line or parapet wall | First floor: up to 100 sq. ft. per frontage; Secondary street: half sq. ft. of primary frontage, total max 200 sq. ft. per property | Not listed | Not listed | Not listed | On building wall, below eave/parapet | Not listed | Unlock | Table 1, Table 2, 17.64.190.05(D), 17.64.190.04(P), 17.64.190.04(G) |
| Pole Sign | 20 feet | Each not to exceed 50 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(G), 17.64.190.04(K) |
| Ground Sign | 8 feet | Each not to exceed 50 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(G), 17.64.190.04(F) |
| Projecting Sign | Not above eave/parapet line | Included in aggregate sign area (see wall sign) | May not extend more than 4 ft 6 in from wall | Not listed | Not listed | Projecting from building wall | Not listed | Unlock | 17.64.190.04(L), Table 1, Table 2 |
| Electronic Variable Message Sign (EVM) | Not listed | 40 sq. ft.; 60 sq. ft. along Highway 50 | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 2, 17.64.190.05(D) |
All other Commercial and Industrial Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not above eave or parapet wall | First floor: up to 100 sq. ft. per frontage; Secondary street: half sq. ft. of primary frontage; total max 200 sq. ft. per property | Not listed | Not listed | Not listed | On building wall, below eave/parapet | Not listed | Unlock | Table 1, Table 2, 17.64.190.05(D), 17.64.190.04(P) |
| Pole Sign | 20 feet | Each not to exceed 50 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(G), 17.64.190.04(K) |
| Ground Sign | 8 feet | Each not to exceed 50 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 1, Table 2, 17.64.190.04(F), 17.64.190.04(G) |
| Projecting Sign | Not above eave/parapet line | Included in aggregate sign area (see wall sign) | May not extend more than 4 ft 6 in from wall | Not listed | Not listed | Projecting from building wall | Not listed | Unlock | 17.64.190.04(L), Table 1, Table 2 |
| Electronic Variable Message Sign (EVM) | Not listed | 40 sq. ft.; 60 sq. ft. along Highway 50 | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Table 2, 17.64.190.05(D) |
PermitPal covers all 7 zoning districts in Florence. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Florence
- Off-premises signs are prohibited in all zoning districts, except as allowed by City Council for public interest (public safety, traffic safety, wayfinding, etc.).
- No sign shall be displayed on public property or within the right-of-way of any road or highway without written approval from the City Council, except as specifically provided otherwise.
- Moving, flashing, rotating, blinking, or animated signs, signs with moving, rotating, or flashing lights, or signs that create the illusion of movement are prohibited, except for time and temperature devices.
- No sign shall be displayed that causes visual obstruction or interference with motor vehicle, bicycle, or pedestrian traffic or traffic-control devices, including any sign that obstructs clear vision in any direction from any street intersection or driveway.
- No sign shall be displayed that poses a danger due to poor design, construction, installation, or maintenance.
- No sign shall be displayed that is in a state of disrepair, wear, or ruin due to age or neglect. All signs shall be maintained in good condition and in compliance with all building and electrical codes.
- Roof signs (erected/placed/maintained upon, against, or directly above the roof, or which project above the eaves/parapet) are prohibited.
- Obsolete signs (advertising an activity, product, or business no longer occupying the premises) must be removed by the property owner within ninety (90) days after the business, product, or service is no longer on the premises (with some historic exceptions).
- Attention-attracting devices are prohibited unless otherwise approved under the chapter.
- Signs or pictures of an obscene, indecent, or immoral character, as will offend morals or decency, are prohibited.
- Signs may not be illuminated in residential zones, except for special nonresidential uses such as churches with special use permits.
- Signs in commercial districts must be turned off by 11:00 p.m.; signs on property adjacent to residential uses must be turned off by 10:00 p.m.
- In no case may murals or signs be painted over unpainted brick or stone on any contributing building in the Florence Downtown National Register of Historic Places Historic District.
Exempt Signs in Florence
- A sign permit is not required for the display of a sign or group of signs, whose total square footage equals nine (9) square feet or less per property.
- Window signs do not require a permit and do not count toward total area allowed, though they must meet other requirements.
- Temporary signs (in commercial zones): One per business, up to sixteen (16) square feet, not exceeding sixty (60) days total per calendar year, do not require a sign permit and do not count toward total area allowed.
- Ghost signs (historic painted signs related to historic tenants or products not sold at the site) may be restored and repainted to existing dimension.
- Signs not requiring a permit under this chapter are still permitted in a development with a comprehensive sign plan unless stated otherwise in the plan.
Sign Plan & Submission Notes for Florence
- A comprehensive sign plan is required for every multi-tenant building or coordinated development (office parks, shopping centers, business parks, planned developments, recreational vehicle parks, civic uses, etc.).
- Any multiple-tenant nonresidential building or development existing at the time of code adoption without a comprehensive sign plan must create one at the time of application for a new sign at the site.
- Planned developments shall include a comprehensive sign plan at the final development plan stage.
- Applications for final subdivision plat shall include a comprehensive sign plan application.
- Where a comprehensive sign plan is required for an existing development with multiple owners, all such owners shall be given notice and a chance to participate or provide written approval; after fifteen (15) days following notice, non-participation counts as consent.
- In developments with an approved comprehensive sign plan, a separate permit is required for each business entity's signs.
Source: municode municipal code