Sign Regulations in Silverthorne, Colorado
Silverthorne, Colorado has specific sign regulations covering 27 sign types across 6 zoning districts. Regulated sign types include Freestanding Sign, Project Development Sign, Temporary Freestanding Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Sign Regulation Overview for Silverthorne, Colorado
Sample Sign Requirements in Silverthorne
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Commemorative Sign / Cornerstone / Plaque | — | 6 sq ft | — |
| Construction Sign (Single Family/Duplex) | — | 6 sq ft | — |
| Directional/Informational Sign | — | 6 sq ft | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
PermitPal Coverage for SilverthorneFull Coverage
Sign Types Covered
27
- Freestanding Sign
- Project Development Sign
- Temporary Freestanding Sign
- Wall Sign
- +2 more types
Zoning Districts
6
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
Official Resources for Silverthorne
Other Cities in Colorado
Frequently Asked Questions
Sign height limits in Silverthorne vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Silverthorne, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Silverthorne, regulated sign types include Freestanding Sign, Project Development Sign, Temporary Freestanding Sign, Wall Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Silverthorne vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED sign regulations in Silverthorne, Colorado typically include restrictions on brightness, animation, message duration, and hours of operation. Many jurisdictions require automatic dimming. Use PermitPal for exact requirements.
AI-Powered Research
Ready to Research Silverthorne Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Silverthorne, Colorado sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Silverthorne, Colorado Sign Rules at a Glance
Silverthorne, Colorado regulates 27 sign types across 6 zoning districts. Sandwich Board Signs in the Town Core Sign District zoning district are capped at 3 ft tall, 9 sq ft, and 3 ft wide (Sec. Sec. 4-9-8(i)). Most commercial signs in Silverthorne require a permit.
Detailed Sign Ordinance Requirements for Silverthorne, Colorado
Sign Rules by Zoning District in Silverthorne (6 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 12 | 35 ft (non-residential), 25 ft (residential zones) | 60 sq ft | — |
| Residential Sign District | 6 | 10 ft | 24 sq ft (aggregate per property, 1 per street frontage) | — |
| Town Core Sign District | 10 | 12 ft | 50 sq ft (per sign), aggregate: 1 sq ft/linear ft frontage | — |
| Commercial Sign District | 9 | 15 ft | 80 sq ft (per sign), aggregate: 1.5 sq ft/linear ft frontage | — |
| HWY 9 Sign District | 9 | 18 ft | 150 sq ft (per sign), aggregate: 2 sq ft/linear ft frontage | — |
| Interstate Sign District | 10 | 25 ft | 200 sq ft (per sign), aggregate: 2.5 sq ft/linear ft frontage | — |
Zone-by-Zone Sign Requirements in Silverthorne(sample of 3 of 6 zones)
Town Core Sign District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | — | 50 sq ft (per sign), aggregate: 1 sq ft/linear ft frontage | — | — | — | On building wall, below second story ceiling | — | Unlock | Sec. 4-9-8(b), (g), Table Sec. 4-9-21 |
| Freestanding Sign | 12 ft | 32 sq ft | — | — | 1 | On property | — | Unlock | Sec. 4-9-8(c), Table Sec. 4-9-21 |
| Under-Canopy or Hanging Sign | — | 12 sq ft | — | — | — | Under canopy, at least 8 ft above grade, not beyond edge of roof/canopy | — | Unlock | Sec. 4-9-8(d), Table Sec. 4-9-21 |
| Projecting Sign | — | 25 sq ft | — | — | — | Projects no more than 5 ft from building, lowest element at least 8 ft above walkway | — | Unlock | Sec. 4-9-8(f), Table Sec. 4-9-21 |
| Sandwich Board Sign | 3 ft | 9 sq ft | 3 ft | — | 1 per business | Within 5 ft of business entrance | — | Unlock | Sec. 4-9-8(i) |
| Construction Sign | — | 18 sq ft aggregate | — | — | 3 | On construction project | — | Unlock | Sec. 4-9-8(k), Table Sec. 4-9-21 |
| Project Development Sign | — | 16 sq ft | — | — | 2 | On development project site | — | Unlock | Sec. 4-9-8(l), Table Sec. 4-9-21 |
| Temporary Freestanding Sign | 4 ft | 12 sq ft (aggregate, up to 4 signs) | — | — | 4 | On property | — | Unlock | Sec. 4-9-8(m), Table Sec. 4-9-21 |
Commercial Sign District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | — | 80 sq ft (per sign), aggregate: 1.5 sq ft/linear ft frontage | — | — | — | On building wall | — | Unlock | Sec. 4-9-9(b)-(c), Table Sec. 4-9-21 |
| Freestanding Sign | 15 ft | 40 sq ft | — | — | 1 | On property | — | Unlock | Sec. 4-9-9(d), Table Sec. 4-9-21 |
| Under-Canopy or Hanging Sign | — | 16 sq ft | — | — | — | Under canopy, min 8 ft above grade, not beyond edge of roof/canopy | — | Unlock | Sec. 4-9-12(b), Table Sec. 4-9-21 |
| Project Development Sign | — | 16 sq ft | — | — | 2 | On development project site | — | Unlock | Sec. 4-9-12(e), Table Sec. 4-9-21 |
| Construction Sign | — | 32 sq ft aggregate | — | — | 4 | On construction project | — | Unlock | Sec. 4-9-12(f), Table Sec. 4-9-21 |
| Drive-through Sign | 6 ft | 24 sq ft | — | — | 2 per drive-through lane | Along drive-through lane | — | Unlock | Sec. 4-9-12(g) |
| Window Sign | — | 50% of window area | — | — | — | Interior surface of window. | — | Unlock | Sec. 4-9-12(h) |
| Temporary Freestanding Sign | 4 ft | 12 sq ft (aggregate, up to 4) | — | — | 4 | On property | — | Unlock | Sec. 4-9-12(i) |
Interstate Sign District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Commercial Building) | — | 200 sq ft (per sign), aggregate: 2.5 sq ft/linear ft frontage | — | — | — | On building wall (including above second story for commercial buildings) | — | Unlock | Sec. 4-9-11(b)-(e), Table Sec. 4-9-21 |
| Freestanding Sign | 25 ft | 80 sq ft | — | — | 1 | On property | — | Unlock | Sec. 4-9-11(d), Table Sec. 4-9-21 |
| Under-Canopy or Hanging Sign | — | 16 sq ft | — | — | — | Under canopy, min 8 ft above grade, not beyond edge of roof/canopy | — | Unlock | Sec. 4-9-12(b), Table Sec. 4-9-21 |
| Project Development Sign | — | 16 sq ft | — | — | 2 | On development project site | — | Unlock | Sec. 4-9-12(e), Table Sec. 4-9-21 |
| Construction Sign | — | 32 sq ft aggregate | — | — | 4 | On construction project | — | Unlock | Sec. 4-9-12(f), Table Sec. 4-9-21 |
| Drive-through Sign | 6 ft | 24 sq ft | — | — | 2 per drive-through lane | Along drive-through lane | — | Unlock | Sec. 4-9-12(g) |
| Window Sign | — | 50% of window area | — | — | — | Interior surface of window. | — | Unlock | Sec. 4-9-12(h) |
| Temporary Freestanding Sign | 4 ft | 12 sq ft (aggregate, up to 4) | — | — | 4 | On property | — | Unlock | Sec. 4-9-12(i) |
PermitPal covers all 6 zoning districts in Silverthorne — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 6 zones for Silverthorne — start freeProhibited Signs in Silverthorne
- It is unlawful to display, construct, erect, alter, use, or maintain any sign except in conformance with the provisions of this Article.
- It is unlawful to alter, maintain, enlarge, use or display any sign erected or constructed prior to the enactment of this Article except in conformance with the provisions herein set forth.
- Signs that are structurally unsafe, unsanitary, or hazardous to the safety or health of any person.
- Signs imitating or resembling official traffic or government signs or signals, or signs creating an unsafe distraction for motor vehicle operators.
- Signs that are in disrepair, damaged, dilapidated, inadequately maintained, or components of signs which do not function as intended.
- Moving, animated, revolving, or rotating signs, except for dials and gauges animated only to the extent necessary to display information.
- Signs that obstruct the view of motor vehicle operators entering a public roadway from any parking area, service drive, private driveway, alley or other thoroughfare, or which obstruct free ingress to or egress from a required entrance or exit.
- Nonconforming Signs, except legal nonconforming signs.
- Neon, other gas-filled, or LED light tubes, except when used as a window sign; exposed neon signs exterior are only permitted in the Interstate Sign District.
- Banners, except as allowed as part of an approved event permit or by temporary banner permit; and only one banner at a time; must meet additional requirements.
- Signs erected on public rights-of-way, except government signs.
- Wind-driven signs, air-activated graphics, or inflatable signs.
- Signs that utilize or incorporate searchlights.
- Signs mounted on the roof of a building, above canopies or eaves, or extending above the uppermost edge of a parapet wall.
- Walking signs, human signs, or sign spinners.
- Signs with auditory messages or sounds.
- Snipe or poster signs, including signs fastened to trees, fences, utility poles, public benches, streetlights, or placed on any public property or public right-of-way.
- Portable wheeled signs and portable message center signs.
- Billboards or off-premises signs.
- Sandwich board signs, except as permitted in the Town Core Sign District.
- Festoons, freestanding blade signs, or teardrop flags of any shape.
- Statuary signs, except those proposed as part of a building sign, and whose area does not exceed fifty percent (50%) of the area of the sign.
- Projected image signs or signs with projected copy.
- Signs with lights or illuminations that flash, scintillate, blink, flicker, vary in intensity, or vary in color.
- Freestanding signs supported by a singular pole or post.
- Under-canopy or hanging signs that extend beyond the edge of the canopy or roof from which they are suspended.
- Back-lit awning signs.
- Internally illuminated cabinet signs with a predominantly white, off-white, or other light colored background.
Exempt Signs in Silverthorne
- Commemorative signs, cornerstones, and plaques not exceeding six (6) square feet (exempt from permits).
- Directional/informational signs of six (6) square feet or less each or as indicated on an approved Comprehensive Sign Plan (exempt from permits).
- Flags not exceeding fifty (50) square feet in area, and no flagpole higher than thirty-five (35) feet in all zone districts except residential zones, in which the maximum height shall be twenty-five (25) feet; a maximum of two flags per property (exempt from permits).
- Government signs (exempt from permits).
- Gravestones (exempt from permits).
- Holiday displays and decorations (exempt from permits).
- Private warning signs (exempt from permits).
- Signs showing underground or public utilities (exempt from permits).
- Scoreboards not exceeding twenty (20) feet in height and sixty (60) square feet in size (exempt from permits).
- Window signs (exempt from permits).
- Vehicular signs (exempt from permits) provided that the vehicle is operable and registered, the sign is permanently and directly applied, the vehicle is used for transport or is a government vehicle, and it is parked/stored in designated areas and does not obstruct circulation.
- Addressing information required by code is exempt from aggregate sign area and permit requirements.
Sign Plan & Submission Notes for Silverthorne
- A comprehensive sign plan is required for single-business buildings; the owner, builder, or developer must present the plan to the Community Development Department before certificate of occupancy issuance, showing proposed locations of all signs.
- A comprehensive sign plan is required for multi-business buildings; the owner, builder, or developer must present the plan to the Community Development Department before certificate of occupancy issuance, showing proposed sign locations, types, and sign area allocation among tenants.
- No more than two wall-mounted signs may be placed on any one building facade, unless as part of an approved Comprehensive Sign Plan.
- On multi-business buildings, the owner will allocate the total sign allowance among businesses according to an approved Comprehensive Sign Plan (as specified in the Town Core, Commercial, HWY 9, and Interstate Sign Districts).
- The sign plan must demonstrate coordinated signage by using three out of six elements: color, size, shape, materials, mounting, or lighting.
- All proposed locations of freestanding signs and building directories must be shown in the comprehensive sign plan.
- All signs must comply with the approved comprehensive sign plan.
- The Community Development Department has the authority to approve or reject comprehensive sign plans and amendments.
- When applying for a sign permit, applications must include details about compliance with any applicable sign plan.
Source: municode municipal code