Sign Regulations in Silverton, Colorado

Silverton, Colorado has specific sign regulations covering 6 sign types across 2 zoning districts. Regulated sign types include Freestanding Sign, Projecting Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: March 3, 2025

Sign Regulation Overview for Silverton, Colorado

Sample Sign Requirements in Silverton

Sign TypeMax HeightMax AreaSetback
Freestanding Sign20 feet40 square feet
Projecting Sign20 feet20 square feet
Wall SignNot higher than eave line or parapet wall40 square feet

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for SilvertonFull Coverage

Sign Types Covered

6

  • Freestanding Sign
  • Projecting Sign
  • Wall Sign
  • Signboard
  • +2 more types

Zoning Districts

2

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions

Official Resources for Silverton

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Silverton, wall signs can be up to Not higher than eave line or parapet wall and monument signs are limited to 20 feet. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Silverton, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Silverton, regulated sign types include Freestanding Sign, Projecting Sign, Wall Sign, Signboard, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Silverton vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED sign regulations in Silverton, Colorado typically include restrictions on brightness, animation, message duration, and hours of operation. Many jurisdictions require automatic dimming. Use PermitPal for exact requirements.

AI-Powered Research

Ready to Research Silverton Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Silverton, Colorado sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Silverton, Colorado Sign Rules at a Glance

Silverton, Colorado regulates 6 sign types across 2 zoning districts. Freestanding Signs in the General Regulations For All Zones zoning district are capped at 20 feet tall and 40 square feet (Sec. Sec. 16-6-60(1)). Most commercial signs in Silverton require a permit.

Detailed Sign Ordinance Requirements for Silverton, Colorado

Sign Rules by Zoning District in Silverton (2 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones620 feet40 square feet
B-A, B-P, E-D, P620 feet40 square feet

Zone-by-Zone Sign Requirements in Silverton

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign20 feet40 square feetOne per tractOne sign per tract; may project over public pedestrian wayUnlockSec. 16-6-60(1)
Projecting Sign20 feet20 square feetMay project over public right-of-wayUnlockSec. 16-6-60(2)
Wall SignNot higher than eave line or parapet wall40 square feetOn building wallUnlockSec. 16-6-60(3)
Signboard8 square feetOne per businessOff public right-of-way, within property of businessUnlockSec. 16-6-60(4)
Signs on MarqueesOn posts or pillars supporting marquee or eaves of marqueeUnlockSec. 16-6-60(5)
Signs on AwningsOn awningsUnlockSec. 16-6-60(6)

B-A, B-P, E-D, P

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignNot higher than eave line or parapet wall40 square feetOn building wallUnlockSec. 16-6-60(3); Sec. 16-6-70(2)-(4)
Freestanding Sign20 feet40 square feetOne per tractOne sign per tract; may project over public pedestrian wayUnlockSec. 16-6-60(1); Sec. 16-6-70(5)
Projecting Sign20 feet20 square feetMay project over public right-of-wayUnlockSec. 16-6-60(2)
Signboard8 square feetOne per businessOff public right-of-way, within property of businessUnlockSec. 16-6-60(4)
Signs on MarqueesOn posts or pillars supporting marquee or eaves of marqueeUnlockSec. 16-6-60(5)
Signs on AwningsOn awningsUnlockSec. 16-6-60(6)

Illumination rules, size formulas, and permit requirements for every sign type in Silverton are available with a free PermitPal account.

Start free

Prohibited Signs in Silverton

  • Off-premises signs are not permitted unless approved by the Board of Trustees.
  • New nonconforming signs are prohibited unless a variance is granted.
  • Abandoned signs must be removed by the property owner.
  • Portable signs attached to vehicles or mobile units are prohibited unless otherwise permitted.
  • Signs that obstruct a driver's vision or produce glare or distraction for motorists are prohibited.
  • Flashing and moving signs are prohibited, except for Christmas-type decorative lights.
  • Signs that resemble or conflict with traffic signs or signals are prohibited.
  • Neon signs with exposed tubing are prohibited, except for 'vacancy' or 'no vacancy' signs.
  • Searchlights are prohibited.
  • Signs made of paper, cloth, canvas, cardboard, wallboard, or similar materials are prohibited.
  • Spinners, pendants, balloons, banners, or streamers are prohibited except as allowed in specific exemptions.
  • Roof signs are prohibited.

Exempt Signs in Silverton

  • Painted signs on windows of the business being advertised.
  • Interior signs located inside windows, with restrictions on flashing or moving lights.
  • Regulatory signs for traffic control or public safety.
  • Signs required by local, state, or federal laws.
  • Temporary decorations or displays for community-wide events, with removal requirements.
  • Historic plaques authorized by the San Juan County Historical Society.
  • Flags of nations, states, or municipalities, with size and usage restrictions.
  • The Flag Code is adopted for the official Flag of the United States.
  • One 'Open' flag per business, with size and height restrictions.
  • Artwork that does not advertise a product or business.
  • Exterior signs displaying merchandise within the property of the business.
  • Christmas and decorative lights, with restrictions on glare or distraction.
  • One sandwich board or signboard per building entrance, with size and location restrictions.
  • One menu box and one 'Specials' board per restaurant or bar, with size restrictions.
  • Temporary signs with size and illumination restrictions.
  • Nonilluminated informational signs approved by the Board of Trustees.
  • Town-sponsored signs and banners for community events, with compliance requirements.
  • Nonilluminated residential identification signs with size and location restrictions.
  • Vehicle signs that are permanently or magnetically attached and incidental to the vehicle's primary use.
  • One sign indicating national approval of facilities, with size restrictions.
  • Temporary banners for businesses, with permit and size restrictions.

Sign Plan & Submission Notes for Silverton

  • The owner of any building or property housing multiple businesses may develop a signage plan for the property, specifying the sign area allowed to each business, provided the aggregate sign area does not exceed the building's allowed aggregate sign area.
  • If there is no approved signage plan, the Town will approve or disapprove sign permit applications on a first-in-time basis up to the building's allowed aggregate sign area.
  • The fact that the aggregate sign area is fully allocated to other businesses is not grounds for seeking a variance.

Source: municode municipal code